Accelerometer Implementation as Feedback on 5 Degree of Freedom Arm Robot

Kunal Kunal, Afif Zuhri Arfianto, Joessianto Eko Poetro, Farhad Waseel, Rachmad Andri Atmoko

Abstract


The research investigated the automatic control system implemented with the 5 DOF (Degree of Freedom) arm robot control system using the closed-loop control method with the MPU 6050 sensor, which integrated the rotation of the MG995 motor servo as a feedback function. The control of this robot used android–based application, in which the app sends data of the rotate angle for each servo motor rotated to a certain angle. The HC – 05 Bluetooth received the data and the Arduino UNO R3 microcontroller processed them. The microcontroller managed every rotation of each servo motor that integrated with an MPU6050 sensor with serial monitor communication to display the rotation of each servo motor. The test results obtained by the standard deviation value showed how large the sample diversity was. The result of this study showed a standard deviation correlation with the number of sample diversity. The higher the standard deviation value, the more sample data spread (data diverse or varies). Otherwise, the smaller the standard deviation value, the more homogenous the sample data. If the standard deviation equals zero, it indicates that the sample has identical data. The highest standard deviation value from servo motor 1 is 5.20, servo motor 2 and 3 are 1.00, servo motor 4 is 2.89, and servo motor 5 is 2.9

Full Text:

PDF

References


V. Kumar, Q. Wang, W. Minghua, S. Rizwan, S. M. Shaikh, and X. Liu, “Computer vision based object grasping 6DoF robotic arm using picamera,” in 2018 4th International Conference on Control, Automation and Robotics (ICCAR), 2018, pp. 111–115.

S. Sharma, S. Sahai, J. Joshi, and N. Hema, “Stage-wise Development of a Remote Controlled Robotic Arm,” in 2018 Fifth International Conference on Parallel, Distributed and Grid Computing (PDGC), 2018, pp. 364–367.

G. I. E. Panie and A. B. Mutiara, “Development of Robotic Arm for Color Based Goods Sorter in Factory Using TCS3200 Sensor with a Web-Based Monitoring System,” in 2018 Third International Conference on Informatics and Computing (ICIC), 2018, pp. 1–6.

P. Tomaszuk, A. Lukowska, M. Recko, and K. Dzicrzck, “Integrated Drive System of Robotic Arm Joint Used in a Mobile Robot,” in 2018 23rd International Conference on Methods & Models in Automation & Robotics (MMAR), 2018, pp. 509–514.

M. Ababneh, H. Shaban, D. AlShalabe, D. Khader, H. Mahameed, and M. AlQudimat, “Gesture Controlled Mobile Robotic Arm for Elderly and Wheelchair People Assistance Using Kinect Sensor,” in 2018 15th International Multi-Conference on Systems, Signals & Devices (SSD), 2018, pp. 636–641.

S. H. Chua, J. S. Limqueco, E. L. Lu, S. W. Que, and D. Abuan, “Development of a Microcontroller-based Wireless Writing Robotic Arm Controlled by Skeletal Tracking,” in 2018 IEEE 10th International Conference on Humanoid, Nanotechnology, Information Technology,Communication and Control, Environment and Management (HNICEM), 2018, no. 978, pp. 1–6.

N. Kandalaft, P. S. Kalidindi, S. Narra, and H. N. Saha, “Robotic arm using voice and Gesture recognition,” in 2018 IEEE 9th Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON), 2018, pp. 1060–1064.

J. S. Artal-Sevil, A. Acon, J. L. Montanes, and J. A. Dominguez, “Design of a Low-Cost Robotic Arm controlled by Surface EMG Sensors,” in 2018 XIII Technologies Applied to Electronics Teaching Conference (TAEE), 2018, pp. 1–8.

T. Szczesny and M. Recko, “Control of robotic arm for Mars rover analogue,” in 2018 19th International Carpathian Control Conference (ICCC), 2018, pp. 259–264.

D. Anggraeni, W. S. M. Sanjaya, M. Munawwaroh, M. Y. S. Nurasyidiek, and I. P. Santika, “Control of robot arm based on speech recognition using Mel-Frequency Cepstrum Coefficients (MFCC) and K-Nearest Neighbors (KNN) method,” in 2017 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation (ICAMIMIA), 2017, no. 1, pp. 217–222.

K. Jahnavi and P. Sivraj, “Teaching and learning robotic arm model,” in 2017 International Conference on Intelligent Computing, Instrumentation and Control Technologies (ICICICT), 2017, vol. 2018-Janua, pp. 1570–1575.

K. Dhayalini and R. Mukesh, “Deterioration & non-deterioration wastes separation using pick & place robot,” in 2018 2nd International Conference on Inventive Systems and Control (ICISC), 2018, no. Icisc, pp. 96–99.

B. Sahan, C. Yolcu, and S. Sahin, “Hardware design of industrial tablet for fare collection based on ARM embedded system,” in 2017 International Conference on Engineering and Technology (ICET), 2017, vol. 2018-Janua, pp. 1–4.

A. Mandal, S. Panda, and A. Goswami, “Driving a Charged Coupled Device (CCD) by microcontroller for LIBS based application,” in 2018 International Symposium on Devices, Circuits and Systems (ISDCS), 2018, no. Ccd, pp. 1–5.

I. Rustam, M. T. Miskon, Z. Jusoh, W. A. K. Wan Chek, and F. D. H. Mohd Fauzi, “Embedded Cdio Approach via Mobile Educational Robot Competition,” in 2018 3rd International Conference on Control, Robotics and Cybernetics (CRC), 2018, pp. 32–36.

H. U. Zaman, Rafiunnisa, and A. M. Shams, “A User-Friendly Low-Cost Mobile App Based Home Appliance Control And Circuit Breaker,” in 2018 Second International Conference on Computing Methodologies and Communication (ICCMC), 2018, no. Iccmc, pp. 203–208.

M. S. Ali and M. H. Bhuyan, “Design and implementation of a low-cost automated blood flow control device through smart phone for bio-medical application,” in 2017 6th International Conference on Informatics, Electronics and Vision & 2017 7th International Symposium in Computational Medical and Health Technology (ICIEV-ISCMHT), 2017, pp. 1–5.

G. R. D. Ganesh, K. Jaidurgamohan, V. Srinu, C. R. Kancharla, and S. V. S. Suresh, “Design of a low cost smart chair for telemedicine and IoT based health monitoring: An open source technology to facilitate better healthcare,” in 2016 11th International Conference on Industrial and Information Systems (ICIIS), 2016, vol. 2018-Janua, pp. 89–94.

N. Technologies and S. U. Munde, “Communication in Wind Turbine,” pp. 97–102, 5094.

C. Ganeshan and S. K. Singh, “Smart Industrial System for Monitoring, Control and Security Using Internet of Things,” in 2018 2nd International Conference on Trends in Electronics and Informatics (ICOEI), 2018, no. Icoei, pp. 958–963.

A. Palchaudhuri and C. . Manimegalai, “Smart Electric Motorcycle Security System Based on GSM and ZigBee Communication,” in 2018 International Conference on Communication and Signal Processing (ICCSP), 2018, pp. 0204–0208.

Y. Jia, G. Yang, and J. Saniie, “Real-time color-based sorting robotic arm system,” in 2017 IEEE International Conference on Electro Information Technology (EIT), 2017, pp. 354–358.

A. S. C. M. Som, M. Z. Rusli, A. Z. Rodzuan, N. Omar, and Y. Husaini, “Development of hand therapy device for cerebral palsy in FKE-UiTM Capstone design subject,” in 2016 IEEE 8th International Conference on Engineering Education (ICEED), 2016, pp. 102–106.

H. ElKheshen, I. Deni, A. Baalbaky, M. Dib, L. Hamawy, and M. A. Ali, “Semi-Automated Self-Monitore - Syringe Infusion Pump,” in 2018 International Conference on Computer and Applications (ICCA), 2018, pp. 331–335.

T. Debnath, S. N. Imtiaz, S. F. Nawaz, A. Al Mahmud, and M. Rahman, “A Novel Multilevel Solar Panel System: Implementation and Verification,” in 2017 IEEE 44th Photovoltaic Specialist Conference (PVSC), 2017, pp. 1067–1070.

T. Debnath, S. N. Imtiaz, and M. Rahman, “Implementation of an RTC based multilevel solar panel system,” in 2017 IEEE Region 10 Humanitarian Technology Conference (R10-HTC), 2017, vol. 2018-Janua, pp. 610–614.

B.-T. Dong, C.-M. Lee, Y.-C. Chiu, and Y.-C. Huang, “An intelligent embedded cloud monitoring system design,” in 2017 International Automatic Control Conference (CACS), 2017, vol. 2017-Novem, pp. 1–4.

V. A. Sharma and M. Rajesh, “Building a quadcopter: An approach for an Autonomous Quadcopter,” in 2018 International Conference on Advances in Computing, Communications and Informatics (ICACCI), 2018, pp. 1252–1258.

A. H. T. E. De Silva, W. H. P. Sampath, N. H. L. Sameera, Y. W. R. Amarasinghe, and A. Mitani, “Development of a novel telecare system, integrated with plantar pressure measurement system,” Informatics Med. Unlocked, vol. 12, no. July, pp. 98–105, 2018.

N. Z. Hamid, A. L. Asnawi, W. H. W. Morshidi, A. A. Ruslan, N. A. Jundi, and H. A. M. Ramli, “Design of a Wireless Device for Monitoring Human Critical Condition at Industrial Workplace,” in 2018 7th International Conference on Computer and Communication Engineering (ICCCE), 2018, pp. 252–257.

D. D. Ligutan, L. J. S. Cruz, M. C. D. P. Del Rosario, J. N. S. Kudhal, A. C. Abad, and E. P. Dadios, “Design and implementation of a fuzzy logic-based joint controller on a 6-DOF robot arm with machine vision feedback,” in 2017 Computing Conference, 2017, vol. 2018-Janua, no. July, pp. 249–257.




DOI: https://doi.org/10.18196/jrc.1107

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Journal of Robotics and Control

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Journal of Robotics and Control (JRC)

P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com

Kuliah Teknik Elektro Terbaik