Pengaruh Penggunaan Filler Serbuk Limbah Gerabah dan Sika-Viscocrete 1003 pada Campuran Beton Mutu Tinggi
DOI:
https://doi.org/10.18196/bce.v3i1.18008Abstract
Abstrak
Untuk membuat gedung dan infrastruktur bertingkat tinggi salah satunya beton berkekuatan tinggi. Salah satu cara membuat beton mutu tinggi adalah dengan membuat beton menjadi Self Compacting Concrete . Tujuan utama yang dilakukan adalah membuat beton mutu tinggi dengan menambahkan aditif alami serbuk limbah gerabah dan aditif kimiawi sika-viscocrete 1003 yang bervariasi. Metode yang digunakan adalah metode eksperimental laboratorium dengan membuat benda uji silinder lebar 150 mm dan tinggi 300 mm. Hasil yang diperoleh dari penelitian ini adalah semakin banyak sika-viscocrete 1003 yang ditambahkan, pada adukan beton dengan mutu rencana 50 MPa maka adukan beton semakin mengalir dan kuat tekan betonnya semakin meningkat. Hal tersebut dapat dilihat bahwa dengan penambahan sika-viscocrete 1003 sebesar 2% dari berat semen kiat tekan beton mampu meningkat sebesar 1,73%.
Kata-kata kunci: Self Compacting Concrete, serbuk limbah gerabah, dan sika-viscocrete 1003.
Abstract
High-strength concrete is one of the materials used to construct high-rise structures and infrastructure. Self Compacting Concrete is one method for producing concrete of a high comresive. The main goal is to create high-quality concrete by mixing natural additives with gerabah waste powder and other chemical additives with Sika-viscocrete 1003. The procedure involves creating cylindrical specimens that are 150 mm broad and 300 mm. As more Sika-viscocrete 1003 is added to a concrete mix with a design quality of 50 MPa, the concrete mix flows more and the concrete's compressive strength rises, according to the study's findings. As can be observed, the concrete pressure can rise by 1.73% with the addition of 2% Sika-viscocrete 1003 by weight of cement..
Keywords: self-compacting concrete, earthenware waste powder, and sika-viscocrete 1003.
Downloads
Published
Issue
Section
License
Copyright
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Bulletin of Civil Engineering (BCE). Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by the journal prior the publication. BCE strives to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
BCE keep the rights to articles that have been published and hold the copyright limited solely for the publication. Authors are permitted to disseminate published article by sharing the link of BCE website. Authors are allowed to use their works for any purposes deemed necessary without written permission from BCE with an acknowledgement of initial publication in this journal.
License
All articles published in BCE are licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) license. You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
