Design of Wind Power Generator for Tambak Houses

Authors

  • Marhatang Marhatang Departement of Mechanical Engineering, State Polytechnic of Ujung Pandang
  • Herman Nawir Departement of Mechanical Engineering, State Polytechnic of Ujung Pandang
  • Muhammad Ruswandi Djalal Departement of Mechanical Engineering, State Polytechnic of Ujung Pandang
  • Maudini Maudini
  • Muh Amar Syarifuddin Departement of Mechanical Engineering, State Polytechnic of Ujung Pandang

DOI:

https://doi.org/10.18196/jet.v7i1.17457

Keywords:

WPG, VAWT type savonius wind power plant, tambak house

Abstract

Wind Power Generation (WPG) requires specific wind conditions to generate electrical energy. Indonesia's wind potential enables the development of small-scale power plants. Innovations in windmill technology need to be developed to ensure maximum results in low wind speed conditions. This research proposes the design and implementation of WPG using a vertical axis to provide lighting for pond houses. The goal is to benefit pond workers in coastal areas that lack electricity from the National Electric Company. The manufacturing stages include design and testing. Based on the design results, the dimensions of the propeller area are 0.393m, the frame height is 1.5m, and the wind turbine height is 0.75m. The performance test of the WPG yielded the highest turbine power value at 15.30 WITA, with a turbine power output of 25.38 Watts.

Author Biography

Muhammad Ruswandi Djalal, Departement of Mechanical Engineering, State Polytechnic of Ujung Pandang

Study Program Energy Engineering, Department of Mechanical Engineering

References

R. D. Muhammad, S. Herlambang, I. J. J. o. M. Andi, Electrical Power,, and V. Technology, "Frequency stability improvement of micro hydro power system using hybrid SMES and CES based on Cuckoo search algorithm," vol. 8, no. 2, pp. 76-84, 2017.

M. Marhatang and M. R. Djalal, "Optimal economic dispatch using particle swarm optimization in Sulselrabar system," IAES International Journal of Artificial Intelligence, vol. 11, no. 1, pp. 221-228, 2022.

M. Ali, M. R. Djalal, M. Fakhrurozi, and D. Ajiatmo, "Optimal design capacitive energy storage (CES) for load frequency control in micro hydro power plant using flower pollination algorithm," in 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar (EECCIS), 2018, pp. 21-26: IEEE.

Y. I. Nakhoda and C. Saleh, "Rancang Bangun Kincir Angin Sumbu Vertikal Pembangkit Tenaga Listrik Portabel," in Seminar Nasional Sains dan Teknologi Terapan (ITATS), 2015, pp. 978-602.

S. Martosaputro and N. J. E. P. Murti, "Blowing the wind energy in Indonesia," vol. 47, pp. 273-282, 2014.

Y. I. Nakhoda and C. J. I. I. J. T. I. Saleh, "Rancang bangun kincir angin pembangkit tenaga listrik sumbu vertikal savonius portabel menggunakan generator magnet permanen," vol. 5, no. 2, pp. 19-24, 2015.

Y. I. Nakhoda and C. J. I. I. J. T. I. Saleh, "Pembangkit Listrik Tenaga Angin Sumbu Vertikal Untuk Penerangan Rumah Tangga Di Daerah Pesisir Pantai," vol. 7, no. 1, pp. 20-28, 2017.

M. Douak, Z. Aouachria, R. Rabehi, N. J. R. Allam, and S. E. Reviews, "Wind energy systems: Analysis of the self-starting physics of vertical axis wind turbine," vol. 81, pp. 1602-1610, 2018.

F. Castellani, D. Astolfi, M. Peppoloni, F. Natili, D. Buttà, and A. J. M. Hirschl, "Experimental vibration analysis of a small scale vertical wind energy system for residential use," vol. 7, no. 2, p. 35, 2019.

J. B. Jacquet, J. T. J. J. o. R. Fergen, and C. Development, "The vertical patterns of wind energy: The effects of wind farm ownership on rural communities in the Prairie Pothole Region of the United States," vol. 13, no. 2, 2018.

Downloads

Published

2023-07-01

How to Cite

Marhatang, M., Nawir, H., Djalal, M. R., Maudini, M., & Syarifuddin, M. A. (2023). Design of Wind Power Generator for Tambak Houses. Journal of Electrical Technology UMY, 7(1), 20–28. https://doi.org/10.18196/jet.v7i1.17457

Issue

Vol. 7 No. 1 (2023): June

Section

Articles

License

Copyright

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Journal of Electrical Technology UMY. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.

Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by the journal prior the publication. JET UMY strives to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.

JET UMY keep the rights to articles that have been published. Authors are permitted to disseminate published article by sharing the link of JET UMY website. Authors are allowed to use their works for any purposes deemed necessary without written permission from JET UMY with an acknowledgement of initial publication in this journal.

License

All articles published in JET UMY are licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) license. You are free to:

  • Share — copy and redistribute the material in any medium or format
  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.