Design and Implementation of a Candy Color Sorter Device using Microcontroller-Based Color Sensor TCS3200

Authors

  • Ladayan Pradana Vicananda Mechatronics Engineering Education, Faculty of Engineering, Universitas Negeri Yogyakarta
  • Saptiana Nur Prahasti Mechatronics Engineering Education, Faculty of Engineering, Universitas Negeri Yogyakarta
  • Khakam Ma’ruf Mechanical Engineering Education, Faculty of Engineering, Universitas Negeri Yogyakarta
  • Rizal Justian Setiawan Industrial Engineering and Management, College of Engineering, Yuan Ze University http://orcid.org/0000-0002-1576-9969
  • Darmono Darmono Civil Engineering and Planning Education, Faculty of Engineering, Yogyakarta State University

DOI:

https://doi.org/10.18196/jet.v8i1.20346

Keywords:

Candy, Color, Microcontroller, Sorter, TCS3200 Sensor

Abstract

The purpose of this research is to design and implement a candy color sorter device using a microcontroller-based TCS3200 color sensor. This technology can be applied in the confectionery and fruit businesses for color-based sorting. The method used is an experimental approach that begins with a literature study, followed by hardware and software design, and device testing. The research results show that the candy sorter device was successfully designed and implemented. This device is capable of sorting candies based on red, green, and blue colors with optimal sensor detection levels. The novelty value of this research is the development of an automatic candy sorter device based on the TCS3200 color sensor, which can help reduce human workload and increase sorting process efficiency in the confectionery industry.

References

A. Safaris and H. Effendi, “Rancang Bangun Alat Kendali Sortir Barang Berdasarkan Empat Kode Warna,” JTEV (Jurnal Teknik Elektro Dan Vokasional), vol. 6, no. 2, pp. 399–410, 2020.

Y. Sari and W. Meisari, “Alat Penyortir Warna Daun Teh Menggunakan Sensor TCS3200 Berbasis Raspberry PI dan Arduino,” TEKINFO, vol. 22, no. 1, pp. 117-130, 2021.

A. Sachdeva, “Development Of Industrial Automatic Multi Colour Sorting and Counting Machine Using Arduino Nano Microcontroller and TCS3200 Colour Sensor,” Int J Eng Sci (Ghaziabad), vol. 6, no. 4, pp. 56–59, 2017.

D. Ratnawati and Vivianti, “Alat Pendeteksi Warna Menggunakan Sensor Warna TCS3200 Dan Arduino Nano,” Prosiding Seminar Nasional Vokasi Indonesia, vol. 1, 2018.

H. Sanusi, H. S. Suryadi, and D. T. Susetianingtias, “Pembuatan Aplikasi Klasifikasi Citra Daun Menggunakan Ruang Warna RGB dan HSV,” Jurnal Ilmiah Informatika Komputer, vol. 24, no. 3, pp. 180–190, 2019.

R. J. Setiawan, I. D. Suryanto, A. Ismara, F. Solikhin, and M. A. Wulandari. Tanagi-Tooth’s Colour Level Detector. Symposium on Innovation and Creativity (iMIT-SIC), vol. 3, pp. 339-345, 2017.

N. Lailatulfath, M. Rahmah, W. Sutanto, and V. Nadhira, “Prototipe Alat Penyortir Telur Berdasarkan Warna dan Ukuran,” Jurnal Otomasi, Kontrol & Instrumentasi, vol. 13, no. 2, pp. 93–100, 2021.

N. Khafit, N. Khamdi, J. Jaenudin, and Edilla, “Rancang Bangun Alat Sortir Buah Apel Berdasarkan Perbedaan Ukuran dan Warna Menggunakan Mikrokontroller Arduino,” JTEV (Jurnal Teknik Elektro dan Vokasional), vol. 9, no. 1, 2023.

E. M. Hasiri, Asniati, and Wiwin, “Sistem Kontrol Otomatis Pada Penyortiran Buah Tomat Menggunakan Sensor Warna TCS3200 dan Mikrokontroler Atmega 2560,” Jurnal Informatika, vol. 6, no. 1, 2017.

E. I. Sari, F. Anggraini, D. Hartama, and I. Okta Kirana, “Prototype Alat Pengecekan dan Penyortir Kesegaran Cabai Berdasarkan Warna Menggunakan Sensor TCS230 Berbasis Arduino,” BEES: Bulletin of Electrical and Electronics Engineering, vol. 2, no. 1, pp. 1–6, 2021.

A. I. Bardani and N. S. Widodo, “Deteksi Zona pada KRSTI dengan Sensor Warna TCS3200,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 1, no. 2, p. 56, 2019.

Y. Sari and W. Meisari, “Alat Penyortir Warna Daun Teh Menggunakan Sensor Tcs3200 Berbasis Raspberry Pi Dan Arduino,” TEKINFO, vol. 22, no. 1, pp. 117-130, 2021.

M. A. Saparudin., R. J. Setiawan., E. Budi., A. Puspito., and I. Fauzi. “Design and Manufacture of Bamboo Handicraft Dryer Machine Based on LPG Gas,” Tadulako Science and Technology Journal, vol. 2, no.1, pp. 01-09, 2021.

D. Rizki, R. ; Muhammad, R. Fadillah, Q. Igwahyudi, and S. Dewanto, “Alat Penyortir dan Pengecekan Kematangan Buah Menggunakan Sensor Warna,” Jurnal Teknik Komputer, vol. 20, no.2, 88-92, 2012.

D. Irawan and D. Wahyudi, “Perancangan dan Pembuatan Alat Penyortir Barang Otomatis berdasarkan Warna Berbasis Arduino Uno,” Journal Repository Universitas Panca Marga Probolinggo, vol. 3, no. 2, pp. 9-12, 2018.

T. T. Nguyen, T. T. Nguyen, V. T. Nguyen, C. C. Cao, and J. Hua, “Application of Arduino Control Mainboard with Color Light Sensor TCS3200 in Color Recognition of Edge Banding in Laser Edge Banding Machine,” IOP Conf Ser Earth Environ Sci, vol. 252, no. 2, p. 022130, 2019.

A. Sachdeva, “Development Of Industrial Automatic Multi Colour Sorting and Counting Machine Using Arduino Nano Microcontroller and TCS3200 Colour Sensor,” Int J Eng Sci (Ghaziabad), vol. 06, no. 04, pp. 56–59, 2017, doi: 10.9790/1813-0604025659.

P. Pramana and R. Mukhaiyar, “Rancang Bangun Alat Penyortir Barang Menggunakan Barcode Berbasis Mikrokontroler,” Journal of Multidisciplinary Research and Development, vol. 4, no. 2, pp. 156–163, 2022.

P. Narahawarin, B. G. Sudarsono, and J. Saputro, “Jurnal Sains dan Teknologi Widyaloka Rancang bangun alat penyortir buah jeruk Berdasarkan warna dengan sensor TCS3200,” Jurnal Sains dan Teknologi Widyaloka,” vol. 1, pp. 213–217, 2022.

F. Supegina and D. Sukindar, “Perancangan Robot Pencapit Untuk Penyotir Barang Berdasarkan Warna Led Rgb Dengan Display Lcd Berbasis Arduino Uno,” Jurnal Teknologi Elektro, vol. 5, no. 1, pp. 9–17, 2014, doi: 10.22441/jte.v5i1.758.

A. Hanafie, S. Baco, and Kamarudding, “Perancangan Alat Penyortir Buah Tomat Berbasis Arduino Uno,” Jurnal Teknologi dan Komputer (JTEK), vol. 1, no. 01, pp. 24–31, 2021, doi: 10.56923/jtek.v1i01.70.

I. D. Suryanto, and R. J. Setiawan, “Hybrid Aerator based on Savonius Wind Turbine and Solar Photovoltaic Technology for Shrimp Pond”, Seminar Nasional TREnD, vol. 1, pp. 82-91, 2021.

Downloads

Published

2024-07-10

How to Cite

Vicananda, L. P., Prahasti, S. N., Ma’ruf, K., Setiawan, R. J., & Darmono, D. (2024). Design and Implementation of a Candy Color Sorter Device using Microcontroller-Based Color Sensor TCS3200. Journal of Electrical Technology UMY, 8(1), 1–8. https://doi.org/10.18196/jet.v8i1.20346

Issue

Vol. 8 No. 1 (2024): June

Section

Articles

License

Copyright

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Journal of Electrical Technology UMY. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.

Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by the journal prior the publication. JET UMY strives to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.

JET UMY keep the rights to articles that have been published. Authors are permitted to disseminate published article by sharing the link of JET UMY website. Authors are allowed to use their works for any purposes deemed necessary without written permission from JET UMY with an acknowledgement of initial publication in this journal.

License

All articles published in JET UMY are licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) license. You are free to:

  • Share — copy and redistribute the material in any medium or format
  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.