Implementation of a PI-Controlled Closed-Loop System for Mecanum Wheel Coordination in an Omni-Directional Robot

Authors

  • Maulana Hakim Susatyo Department of Electrical Engineering, Faculty of Engineering, Universitas Muhammadiyah Yogyakarta
  • Muhamad Yusvin Mustar Department of Electrical Engineering, Faculty of Engineering, Universitas Muhammadiyah Yogyakarta https://orcid.org/0009-0008-1126-5019

DOI:

https://doi.org/10.18196/jet.v7i2.22263

Keywords:

PI Controller, Mecanum Wheels, DC Motor

Abstract

The MR CRUSH robot is designed for participation in the 2023 Indonesian Thematic Robot Contest (KRTMI). In the motor part of the MR CRUSH robot, each wheel is designed to rotate independently and using a mecanum wheel system. Mecanum wheels are a type of wheel that has the ability to move in all directions by combining rotational speed and direction. To maximize this capability, the force generated on each mecanum wheel must be the same as set point. One of the influences of the amount of force produced is the mecanum wheel rotation speed. This research aims to implement a closed-loop control system with a Proportional-Integral (PI) controller. By implementing this PI controller, it ensures that the rotation speed of the dc motor corresponds to the set point value given, so that the four dc motors that drive the mecanum wheel will have the same rotation speed. The parameters for the PI controller used in this research are Kp = 0.3 and Ki = 0.08. Based on the results, the closed-loop control system with the designed PI controller produces constant motor rotation speed at the set point with 0 steady-state error.


Author Biography

Muhamad Yusvin Mustar, Department of Electrical Engineering, Faculty of Engineering, Universitas Muhammadiyah Yogyakarta

References

B. Kusumoputro et al., “Buku Pedoman Kontes Robot Indonesia (KRI) Tahun 2023,” Balai Pengembangan Talenta Indonesia Pusat Prestasi Nasional Kementerian Pendidikan, Kebudayaan, Riset dan Teknologi Republik Indonesia, hal. 1–150, 2023.

N. Thongpance dan P. Chotikunnan, “Design and Construction of Electric Wheelchair with Mecanum Wheel,” J. Robot. Control, vol. 4, no. 1, hal. 71–82, 2023, doi: 10.18196/jrc.v4i1.17095.

R. Hansza dan S. I. Haryudo, “Rancang Bangun Kontrol Motor DC dengan PID Menggunakan Perintah Suara dan Monitoring Berbasis Internet of Things ( IOT ),” J. Tek. Elektro, vol. 9, no. 2, hal. 477–485, 2020.

“The PID Controller & Theory Explained,” 2023. https://www.ni.com/en/shop/labview/pid-theory-explained.html (diakses 1 Februari 2024).

A. Ma’arif, “Embedded Control System of DC Motor Using Microcontroller Arduino and PID Algorithm,” IT J. Res. Dev., vol. 6, no. 1, hal. 30–42, 2021, doi: 10.25299/itjrd.2021.vol6(1).6125.

Downloads

Published

2024-05-21

How to Cite

Susatyo, M. H., & Mustar, M. Y. (2024). Implementation of a PI-Controlled Closed-Loop System for Mecanum Wheel Coordination in an Omni-Directional Robot. Journal of Electrical Technology UMY, 7(2), 76–81. https://doi.org/10.18196/jet.v7i2.22263

Issue

Vol. 7 No. 2 (2023): December

Section

Articles

License

Copyright

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Journal of Electrical Technology UMY. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.

Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by the journal prior the publication. JET UMY strives to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.

JET UMY keep the rights to articles that have been published. Authors are permitted to disseminate published article by sharing the link of JET UMY website. Authors are allowed to use their works for any purposes deemed necessary without written permission from JET UMY with an acknowledgement of initial publication in this journal.

License

All articles published in JET UMY are licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) license. You are free to:

  • Share — copy and redistribute the material in any medium or format
  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.