Reliability Analysis of Power Distribution System

Authors

  • Khaidir Ali Universitas Muhammadiyah Yogyakarta
  • Rama Okta Wiyagi Universitas Muhammadiyah Yogyakarta
  • Ramadoni Syahputra Universitas Muhammadiyah Yogyakarta

DOI:

https://doi.org/10.18196/jet.1209

Keywords:

Distribution system, SAIDI, SAIFI, system reliability

Abstract

Electrical distribution system is a component of electrical power system that is very important because it is closest to the customer. In its operation, the distribution system often suffers that causes the flow of electricity to the customer is interrupted. This situation is not expected by customers or by electric power companies. The more frequent and longer the occurrence of electrical power flow interruption, the lower the system reliability, and vice versa. Reliability of a distribution system can be analyzed based on SAIDI and SAIFI parameters. In this research, reliability analysis of distribution system on Gejayan substation. The analysis result using SAIDI and SAIFI parameters shows that Gejayan substation is reliable enough to national standard, while based on international standard still not reliable.

Author Biographies

Khaidir Ali, Universitas Muhammadiyah Yogyakarta

Department of Electrical Engineering

Rama Okta Wiyagi, Universitas Muhammadiyah Yogyakarta

Department of Electrical Engineering

Ramadoni Syahputra, Universitas Muhammadiyah Yogyakarta

Department of Electrical Engineering

References

Allen Short, T. 2014. Electric Power System Distribution Handbook Second Edition. USA: CRC Press.

Saodah, S. 2008. Evaluasi Keandalan Sistem Distribusi Tenaga Listrik Berdasarkan SAIDI dan SAIFI (Jurnal). Yogyakarta.

Fajar, A. 2015. Analisis Keandalan Sistem Distribusi Tenaga Listrik DI P.T. PLN UPJ Rayon Bumiayu (Skripsi). Yogyakarta: Universitas Muhammadiyah Yogyakarta.

Marsudi, D. 2005. Operasi Sistem Tenaga Listrik. Jakarta: Balai Penerbit dan Humas ISTN.

IEEE Std. 1366-2012. 2012. IEEE Guide for Electric Power Distribution Reliability Indices. USA.

Syahputra, R., Robandi, I., Ashari, M. (2015). Performance Improvement of Radial Distribution Network with Distributed Generation Integration Using Extended Particle Swarm Optimization Algorithm. International Review of Electrical Engineering (IREE), 10(2). pp. 293-304.

Syahputra, R., Robandi, I., Ashari, M. (2015). Reconfiguration of Distribution Network with DER Integration Using PSO Algorithm. TELKOMNIKA, 13(3). pp. 759-766.

Syahputra, R., (2012), “Distributed Generation: State of the Arts dalam Penyediaan Energi Listrik”, LP3M UMY, Yogyakarta, 2012.

Syahputra, R., (2016), “Transmisi dan Distribusi Tenaga Listrik”, LP3M UMY, Yogyakarta, 2016.

Syahputra, R., (2015), “Teknologi dan Aplikasi Elektromagnetik”, LP3M UMY, Yogyakarta, 2016.

Syahputra, R., Robandi, I., Ashari, M. (2014). Optimization of Distribution Network Configuration with Integration of Distributed Energy Resources Using Extended Fuzzy Multi-objective Method. International Review of Electrical Engineering (IREE), 9(3), pp. 629-639.

Syahputra, R., Robandi, I., Ashari, M. (2014). Performance Analysis of Wind Turbine as a Distributed Generation Unit in Distribution System. International Journal of Computer Science & Information Technology (IJCSIT), Vol. 6, No. 3, pp. 39-56.

Syahputra, R., (2013), “A Neuro-Fuzzy Approach For the Fault Location Estimation of Unsynchronized Two-Terminal Transmission Lines”, International Journal of Computer Science & Information Technology (IJCSIT), Vol. 5, No. 1, pp. 23-37.

Syahputra, R., (2012), “Fuzzy Multi-Objective Approach for the Improvement of Distribution Network Efficiency by Considering DG”, International Journal of Computer Science & Information Technology (IJCSIT), Vol. 4, No. 2, pp. 57-68.

Syahputra, R., Soesanti, I. (2015). “Control of Synchronous Generator in Wind Power Systems Using Neuro-Fuzzy Approach”, Proceeding of International Conference on Vocational Education and Electrical Engineering (ICVEE) 2015, UNESA Surabaya, pp. 187-193.

Syahputra, R., Robandi, I., Ashari, M. (2014). “Optimal Distribution Network Reconfiguration with Penetration of Distributed Energy Resources”, Proceeding of 2014 1st International Conference on Information Technology, Computer, and Electrical Engineering (ICITACEE) 2014, UNDIP Semarang, pp. 388 - 393.

Syahputra, R., Robandi, I., Ashari, M., (2013), “Distribution Network Efficiency Improvement Based on Fuzzy Multi-objective Method”. International Seminar on Applied Technology, Science and Arts (APTECS). 2013; pp. 224-229.

Syahputra, R., Robandi, I., Ashari, M., (2012), “Reconfiguration of Distribution Network with DG Using Fuzzy Multi-objective Method”, International Conference on Innovation, Management and Technology Research (ICIMTR), May 21-22, 2012, Melacca, Malaysia.

Syahputra, R. (2010). Fault Distance Estimation of Two-Terminal Transmission Lines. Proceedings of International Seminar on Applied Technology, Science, and Arts (2nd APTECS), Surabaya, 21-22 Dec. 2010, pp. 419-423.

Syahputra, R., Soesanti, I. (2015). Power System Stabilizer model based on Fuzzy-PSO for improving power system stability. 2015 International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation (ICAMIMIA), Surabaya, 15-17 Oct. 2015 pp. 121 - 126.

Syahputra, R., Soesanti, I. (2016). Power System Stabilizer Model Using Artificial Immune System for Power System Controlling. International Journal of Applied Engineering Research (IJAER), 11(18), pp. 9269-9278.

Jamal, A., Syahputra, R. (2016). Heat Exchanger Control Based on Artificial Intelligence Approach. International Journal of Applied Engineering Research (IJAER), 11(16), pp. 9063-9069.

Downloads

Published

2017-06-30

How to Cite

Ali, K., Wiyagi, R. O., & Syahputra, R. (2017). Reliability Analysis of Power Distribution System. Journal of Electrical Technology UMY, 1(2), 67–74. https://doi.org/10.18196/jet.1209

Issue

Vol 1, No 2 (2017)

Section

Articles

License

Copyright

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Journal of Electrical Technology UMY. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.

Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by the journal prior the publication. JET UMY strives to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.

JET UMY keep the rights to articles that have been published. Authors are permitted to disseminate published article by sharing the link of JET UMY website. Authors are allowed to use their works for any purposes deemed necessary without written permission from JET UMY with an acknowledgement of initial publication in this journal.

License

All articles published in JET UMY are licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) license. You are free to:

  • Share — copy and redistribute the material in any medium or format
  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.