Microcontroller-Based Automatic Treatment Skin Treater Design
DOI:
https://doi.org/10.18196/jet.2444Keywords:
Arduino, Control, RubberAbstract
Rubber or rubber trees (Hevea brasiliensis) is one of the export commodities that become the source of income for the state income. From year to year, the increasing demand for rubber in various areas is very significant. Dusun IV Bandar Sidomulyo is a hamlet located in Lempuyang Bandar Village, Way Pengubuan Subdistrict, Central Lampung Regency with ± 200 houses where source of livelihood is still depend on rubber plantation. So the residents must be willing to peel the skin of rubber plants at early days to get maximum rubber yield. The prototype of Automatic Rubber Tree Tool based on Microcontroller that has been designed works peeling the bark of a tree with depth 1,5 mm with Duwet or Jamblang (Syzygium cumini) trees as an object, so that the tool can be used to peel rubber automatically on rubber trees generally.References
S. Damanik, Budidaya dan Pasca Panen KARET. Bogor: Pusat Penelitian dan Pengembangan Perkebunan, 2010.
I. Maulana, “RTC (Real Time Clock) DS1307 (Code Vision AVR) – proyekrumahan.id,” 2013. [Online]. Available: https://proyekrumahan.id/2013/06/rtc-real-time-clock-ds1307-code-vision-avr/. [Accessed: 02-Apr-2017].
A. Setiawan, “Sistem Penyiraman dan Pemupukan Otomatis menggunakan RTC (Real Time Clock) dan Sensor Kelembababan Tanah Berbasis Arduino Uno R3,” 2014.
R. Antoni, “Perancangan Sistem Pengaturan Kecepatan Motor DC,” Univ. Marit. Raja Ali Haji, vol. 1, no. 1, pp. 1–11, 2008.
Downloads
Published
How to Cite
Issue
Section
License
Copyright
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Journal of Electrical Technology UMY. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by the journal prior the publication. JET UMY strives to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
JET UMY keep the rights to articles that have been published. Authors are permitted to disseminate published article by sharing the link of JET UMY website. Authors are allowed to use their works for any purposes deemed necessary without written permission from JET UMY with an acknowledgement of initial publication in this journal.
License
All articles published in JET UMY are licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) license. You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
