Electrical System Design and Installation of New Building, Aisyiyah University, Yogyakarta
DOI:
https://doi.org/10.18196/jet.2337Keywords:
Electrical Installation, Artificial Lighting, Short-circuit Current, Power Distribution, Drop VoltageAbstract
Aisyiyah University New Yogyakarta Building is one of the commercial buildings that moves the field of education in Yogyakarta. The New Building of Aisyiyah University Yogyakarta consists of 10 floors, including the basement floor, main floor and roof floor. Electric loads installed at the New Building of Aisyiyah University Yogyakarta include lighting loads (lights) and power loads (sockets) and the power loads of electric motors (air conditioners, elevators and others), which of course requires a large enough electricity supply. Electricity installed in the New Building of Aisyiyah University in Yogyakarta is 1010.9 kVA. The power supplied is 800 kVA from State Electricity Company and the total power capacity of the transformer is 1000 kVA and a generator set with a capacity of 1000 kVA. Where the backup power supply system is fully supplied by the generator set.References
Badan Standardisasi Nasional, Persyaratan Umum Instalasi Listrik 2000, vol. 2000, no. Puil. 2000.
Badan Standardisasi Nasional, Tata Cara Perancangan Sistem Pencahayaan Buatan pada Bangunan Gedung. 2001.
Hage, “Perbaikan Faktor Daya Menggunakan Kapasitor | Dunia Listrik,” 2008. [Online]. Available: http://dunia-listrik.blogspot.com/2008/12/perbaikan-faktor-daya-menggunakan.html. [Accessed: 08-May-2018].
International Electrotechnical Commission, “International Standard Short-circuit currents in three-phase a.c. systems,” in 61010-1 © Iec:2001, vol. 07, 2001, p. 13.
Badan Standardisasi Nasional, Tata Cara Perencanaan Proteksi Bangunan dan Peralatan terhadap Sambaran Petir. 2002.
Badan Standardisasi Nasional, Sistem Proteksi Petir pada Bangunan Gedung. 2004.
Downloads
Published
How to Cite
Issue
Section
License
Copyright
The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Journal of Electrical Technology UMY. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by the journal prior the publication. JET UMY strives to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
JET UMY keep the rights to articles that have been published. Authors are permitted to disseminate published article by sharing the link of JET UMY website. Authors are allowed to use their works for any purposes deemed necessary without written permission from JET UMY with an acknowledgement of initial publication in this journal.
License
All articles published in JET UMY are licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) license. You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.