Manufaktur dan Analisa Kekuatan Tarik Komposit Hybrid Serat Glass/Carbon untuk Aplikasi Pembuatan Blade Turbin Savonius

Authors

  • Muhammad Abdus Shomad Universitas Muhammadiyah Yogyakarta
  • Ferriawan Yudhanto Universitas Muhammadiyah Yogyakarta
  • Rinasa Agistya Anugrah Universitas Muhammadiyah Yogyakarta

DOI:

https://doi.org/10.18196/jqt.020122

Keywords:

Hybrid Laminate Composite, Vacuum Infusion, Glass Fiber, Carbon Fiber

Abstract

Blade design and material selection for savonius turbines need to accurate to produce high power input. This research aims to make the most robust blade material by vacuum infusion manufactured. The hybrid laminate composite applied in the manufacture of Savonius turbine blades consists of woven carbon fiber with chopped strand mat glass fiber and woven glass fiber. The variations of fiber composition comprised of five layers, namely 5An (5 layers of woven glass fiber), 5Ac (5 layers of chopped strand mat glass fiber), 2C-3An (2 woven carbon fiber-3 woven glass), and 2C-3Ac (2 woven carbon fiber-3 chopped strand mat glass fiber). The results showed 2C-3An for the best variation of hybrid laminate composite with the tensile strength of 219 MPa, with the modulus of elasticity of 6.8 GPa and the smallest density was 1.21 g/cm3.

References

Jesthi, D.K., Nayak, A., Mohanty, S.S., Rout, A.K. and Nayak, R.K. 2018, June. Evaluation of mechanical properties of hybrid composite laminates reinforced with glass/carbon woven fabrics. In IOP Conf. Ser. Mater. Sci. Eng. (Vol. 377, p. 012157).

Joseph, K., Tolêdo Filho, R.D., James, B., Thomas, S. and De Carvalho, L.H., 1999. A review on sisal fiber reinforced polymer composites. Revista Brasileira de Engenharia Agrícola e Ambiental, 3(3), pp.367-379.

Mawardi, I. and Hanif, H. 2018. Sifat Mekanis Komposit Polimer Hibrid Diperkuat Serat Sabut Kelapa-E-Glass. ETHOS: Jurnal Penelitian dan Pengabdian kepada Masyarakat, 6(2), pp.297-304.

Pradana, A.J., Nugroho, G. and Musyafa, A., 2013. Rancang Bangun Turbin Angin Vertikal Jenis Savonius dengan Variasi Profil Kurva Blade untuk Memperoleh Daya Maksimum. Jurnal Teknik POMITS, 7(7), pp.1-6.

Standard ASTM D3039. 2008. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. ASTM International, West Conshohocken, PA.

Wisnujati, A. and Yudhanto, F. 2018. Analisis kekuatan mekanik exhaust cover komposit hybrid untuk sepeda motor dengan metode vacuum infusion. Turbo: Jurnal Program Studi Teknik Mesin, 7(1).

Yudhanto, F., Sudarisman, S. and Ridlwan, M., 2016. Karakterisasi Kekuatan Tarik Komposit Hybrid Lamina Serat Anyam Sisal dan Gelas Diperkuat Polyester. Semesta Teknika, 19(1), pp.48-54.

Yudhanto, F. and Rochardjo, H.S., 2018, May. Application of taguchi method for selection parameter bleaching treatments against mechanical and physical properties of agave cantala fiber In. In IOP Conference Series: Materials Science and Engineering (Vol. 352, No. 1, p. 012002).

Downloads

Published

2020-10-31

How to Cite

Shomad, M. A., Yudhanto, F., & Anugrah, R. A. (2020). Manufaktur dan Analisa Kekuatan Tarik Komposit Hybrid Serat Glass/Carbon untuk Aplikasi Pembuatan Blade Turbin Savonius. Quantum Teknika : Jurnal Teknik Mesin Terapan, 2(1), 47–51. https://doi.org/10.18196/jqt.020122

Issue

Section

Articles

Most read articles by the same author(s)