Sistem Kontrol Pesawat Tanpa Awak Untuk Menentukan Waypoint Berbasis Ardupilot
DOI:
https://doi.org/10.18196/jqt.v2i2.11490Keywords:
Unmanned Aerial Vechicle, Ardupilot, Waypoint, APM plannerAbstract
An unmanned Aerial Vehicle (UAV) is a type of unmanned aerial vehicle which is controlled by a remote system. This type of aircraft is usually controlled by remote control from outside the plane and can also move automatically based on a program that has been programmed on the computer system. In this study, a control system with autopilot and remote control is used. This study aims to apply the ardupilot system to the super heavy model aircraft with a long-range flight mode control system using the Futaba T8J (8 channel) radio control. The results of this study took a flight time of 15.02 minutes with an altitude of 30 meters, a waypoint radius of 20 meters with a speed of 10 m / s.
References
Devionita, S. 2020. Rancang Bangun Kontrol Pergerakan Posisi Kapal Dengan Sistem Waypoint Berbasis Gps Menggunakan Metode Pid. Media Elektrika, 13(2), 89-99.
Frasiska, I. G. F., Budiastra, I. I. N., & Pratolo Rahardjo, S. Sistem Pesawat Tanpa Awak Menggunakan Kamera Thermal Untuk Membantu Pencarian Korban Bencana Alam. Jurnal Spektrum, 7(4), 100-107.
Muhammad, F. A. 2019. Rancang Bangun Model Pesawat Tak Berawak Untuk Kebutuhan Pemetaan Udara (Biaya Produksi, Perawatan Dan Perbaikan). Politeknik Negeri Sriwijaya,
Nugroho, G., Agung, B. M., Setiawan, B., & Wiratama, C. 2017. CFD simulation of the end plates effect on the Elang Caraka Unmanned Aerial Vehicle (UAV). Paper presented at the 2017
International Conference on Advanced Mechatronics, Intelligent Manufacture, and Industrial Automation (ICAMIMIA).
Nurtyawan, R., Saepuloh, A., Budiharto, A., & Wikantika, K. 2016. Modeling surface roughness to estimate surface moisture using radarsat-2 quad polarimetric SAR data. Paper presented at the Journal of Physics: Conference Series.
Saroinsong, H. S., Poekoel, V. C., & Manembu, P. D. 2018. Rancang Bangun Wahana Pesawat Tanpa Awak (Fixed Wing) Berbasis Ardupilot. Jurnal Teknik Elektro Dan Komputer, 7(1), 73-84.
Shomad, M. A., Yudhanto, F., & Anugrah, R.
A. 2020. Manufaktur dan Analisa Kekuatan Tarik Komposit Hybrid Serat Glass/Carbon untuk Aplikasi Pembuatan Blade Turbin Savonius. Quantum Teknika: Jurnal Teknik Mesin Terapan, 2(1), 47-51.
Wijaya, T., & Sugiharto, A. 2019). Sistem Auto Take Off, Auto Pilot, Auto Landing, dan RTH pada Pesawat Tanpa Awak (UAV) Fakultas Teknologi Informasi dan Elektro Universitas Teknologi Yogyakarta. University of Technology Yogyakarta.
Zaky, M., Mufti, A., & Rahman, A. 2018. Perancangan Sistem Kendali Berbasis Gps (Global Positioning System) Pada Kapal Tanpa Awak. Jurnal Karya Ilmiah Teknik Elektro, 3(2).
Downloads
Published
How to Cite
Issue
Section
License
Copyright
The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Quantum Teknika : Jurnal Teknik Mesin Terapan as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by Quantum Teknika : Jurnal Teknik Mesin Terapan prior to the publication. Quantum Teknika : Jurnal Teknik Mesin Terapan strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
Quantum Teknika : Jurnal Teknik Mesin Terapan keep the rights to articles that have been published. Authors are permitted to disseminate published articles by sharing the link to Quantum Teknika : Jurnal Teknik Mesin Terapan website. Authors are allowed to use their works for any purposes deemed necessary without written permission from Quantum Teknika : Jurnal Teknik Mesin Terapan with an acknowledgment of initial publication in this journal.
License
All articles published in Quantum Teknika : Jurnal Teknik Mesin Terapan are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC-BY-NC). You are free to :
1. Share – copy and redistribute the material in any medium or format.
2. Adapt – remix, transform, and build upon the material.
The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:
1. Attribution - you must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
2. NonCommercial - You may not use the material for commercial purposes.
3. No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.