Analisa Keausan Besi Cor Kelabu dan Alumunium Ai₂O₃ dengan Pelumas SAE 40 Menggunakan Alat Uji Tribology Pin On Disc

Authors

  • Aan Burhanudin Jurusan Teknik Mesin, Fakultas Teknik, Universitas PGRI Semarang
  • Hisyam Ma'mun Jurusan Teknik Mesin, Fakultas Teknik, Universitas PGRI Semarang
  • Anggit Bayu Prabowo Jurusan Teknik Mesin, Fakultas Teknik, Universitas PGRI Semarang
  • Aries Dwi Cahyono Jurusan Teknik Mesin, Fakultas Teknik, Universitas PGRI Semarang
  • Ihsan Nur Roziqin Jurusan Teknik Mesin, Fakultas Teknik, Universitas PGRI Semarang

DOI:

https://doi.org/10.18196/jqt.v3i2.14175

Keywords:

Friction, Pin on disc, Tribology.

Abstract

Tribology is used for testing wear and tear materials to know the results of wear and friction. Tribology consists of pins in the shape of a ball made of certain materials needed according to our needs, and discs can also be adjusted according to the types of materials. This research aims to know the results of the comparison between the wear of cast iron and aluminum AI O₃. This study analyzes the aluminum material for the ± 13th rotation, the friction force that occurs in this condition is 0.700 gram. It decreases to 0.470 gram in this condition, and the frictional force is in a steady state. This study analyzes the Cast Iron material will be stable after passing through the 10th round. The frictional force that occurs in this condition is 0.550 grams and then decreases to 0.245 grams. The frictional force is in a steady-state condition.

References

Rif’an, A., Hidayat, T., & Winarso, R. 2017. Pengaruh Pelumasan Terhadap Keausan Aluminium Menggunakan Mesin Two Disk Tribometer Pada 1000 RPM. Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer, 8(1), 273–282.

Sukirno. 2012. Pelumasan dan teknologi pelumas. Fakultas Teknik, Universitas Indonesia Jakarta.

Syafa'at, I., Hilmy, F., & Tauviqirrahman, M. (2018). Wear Analysis of Spherical Graphite Cast Iron Using Pin-on Disc Tribotester. Journal of Physical Science, 29.

Downloads

Published

2022-04-30

How to Cite

Burhanudin, A., Ma’mun, H., Prabowo, A. B., Cahyono, A. D., & Roziqin, I. N. (2022). Analisa Keausan Besi Cor Kelabu dan Alumunium Ai₂O₃ dengan Pelumas SAE 40 Menggunakan Alat Uji Tribology Pin On Disc. Quantum Teknika : Jurnal Teknik Mesin Terapan, 3(2), 79–81. https://doi.org/10.18196/jqt.v3i2.14175

Issue

Section

Articles