Risk Assessment Kesehatan dan Keselamatan Kerja (K3) pada Pekerjaan Bongkar Menggunakan Metode Hazard Identification, Risk Assessment, & Risk Control pada Pelabuhan Ciwandan di Banten
DOI:
https://doi.org/10.18196/jqt.v4i1.15882Keywords:
Hazard Identification, Risk Assessment, Risk Control, Unloading Work, Safety Work.Abstract
Unloading work at the port has a high risk. Thus, Occupational Health and Safety (K3) through risk assessment must always be considered so that it meets K3 standards so that the risk of work accidents can be reduced. This study aims to conduct a K3 risk assessment on unloading work using the HIRARC (hazard identification risk assessment & control) method at the Ciwandan Port in Banten. This exploration is an assessment that concentrates on using a subjective methodology with the stages of a basic review, problem planning, and examination objectives, sharing information, managing HIRARC data, investigating the report, and making conclusions. The consequence of this study shows that the risk rating that can be identified is at least 2 Low, 7 High, and 8 Emergency from the aspect of working environment conditions, activities, and mental conditions of Ciwanden Banten Port workers. So it can be concluded that there are aspects of K3 that have a high risk and require higher attention. Therefore, further research is needed regarding risk control that can be provided based on a risk assessment from the word related to the Health and Safety (K3) technique HIRARC (Hazard Identification, Risk Assessment, and Risk Control) at the Port of Ciwandan in Banten.References
Adam, M. 2019. Pengaruh peningkatan kinerja dermaga terhadap pertumbuhan pengguna jasa tranportasi laut di Pelabuhan Merak Banten. Jurnal Online Mahasiswa (JOM) Bidang Teknik Sipil, 1(1).
Aditya, H., & Nur, S. 2021. Kinerja Peralatan Bongkar General Cargo (Steel Billet) Pada MV. Harmony SW Oleh PT Bintang Mustika Sakti Di Pelabuhan Ciwandan Banten. Majalah Ilmiah Gema Maritim, 23(1), 26-31.
Fathurokhman, F., Wahono, S., & Widhiastuti, H. 2019. Pengaruh Persepsi Tentang Keselamatan Dan Kesehatan Kerja Terhadap Motivasi Kerja Di PT PLN (Persero) UP2D Jawa Tengah & Di Yogyakarta. Proyeksi: Jurnal Psikologi, 14(2), 139-150.
Gamal, N. L., Taneo, S. Y. M., & Halim, L. 2018. Job satisfaction as a mediation variable in the relationship between work safety and health (k3) and work environment to employee performance. Jurnal Aplikasi Manajemen, 16(3), 486-493.
Smarandana, G., Momon, A., & Arifin, J. 2021. Penilaian Risiko K3 pada Proses Pabrikasi Menggunakan Metode Hazard Identification, Risk Assessment and Risk Control (HIRARC). Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1), 56-62.
Heikal, M. 2019, April. Optimalisasi kinerja pelayanan bongkar muat curah kering pada dermaga 5A di Pelabuhan Ciwandan. In Prosiding Seminar Intelektual Muda (Vol. 1, No. 1).
Ihsan, T., Edwin, T., & Irawan, R. O. 2017. Analisis risiko k3 dengan metode hirarc pada area produksi pt cahaya murni andalas permai. Jurnal Kesehatan Masyarakat Andalas, 10(2), 179-185.
Indragiri, S., & Yuttya, T. 2018. Manajemen risiko k3 menggunakan hazard identification risk assessment and risk control (hirarc). Jurnal Kesehatan, 9(1), 39-52.
Nugraha, W. A., Budiarto, U., & Amiruddin, W. 2015. Analisa Waktu Bongkar Muat Kapal Peti Kemas Pada Terminal III Pelabuhan Tanjung Priok Jakarta. Jurnal Teknik Perkapalan, 3(4).
Nasirly, R., & Septianto, D. 2020. Analisis Risiko pada Separator di Industri Migas dengan Metode HIRARC. In Seminar Nasional Teknologi Informasi Komunikasi dan Industri (p. 523).
Nuryono, A., & Aini, M. N. 2020. Analisis Bahaya dan Resiko Kerja di Industri Pengolahan Teh dengan Metode HIRA atau IBPR. Journal of Industrial and Engineering System, 1(1).
Perdana, R. M. 2021. Analysis of theory of planned behavior (TPB) in disobedience behavior towards occupational health and safety (K3). Journal of economics, business, and government challenges, 4(2), 139-146.
Prabaswari, A. D., Susanti, D. A., Utomo, B. W., & Shintira, B. R. 2020, December. Work Hazard Risk Analysis and Control in Grey Finishing Department Using HIRARC (Hazard Identification, Risk Assessment and Risk Control). In IOP Conference Series: Materials Science and Engineering (Vol. 982, No. 1, p. 012053). IOP Publishing.
Ramadhan, F. 2017. Analisis Kesehatan dan Keselamatan Kerja (K3) Menggunakan Hazard Identification Risk Assessment and Risk Control (HIRARC). Prosiding Seminar Nasional Riset Terapan| SENASSET, 164–169.
Rout, B. K., & Sikdar, B. K. 2017. Hazard identification, risk assessment, and control measures as an effective tool of occupational health assessment of hazardous process in an iron ore pelletizing industry. Indian journal of occupational and environmental medicine, 21(2), 56.
Santos, R. B., & de Oliveira, U. R. 2019. Analysis of occupational risk management tools for the film and television industry. International Journal of Industrial Ergonomics, 72, 199-211.
Supriyadi, S., & Ramdan, F. 2017. Hazard Identification and Risk Assessment In Boiler Division using Hazard Identification Risk Assessment and Risk Control (HIRARC). Journal of Industrial Hygiene and Occupational Health, 1(2), 161-177.
Triswandana, I. W. G. E., & Armaeni, N. K. 2020. Penilaian Risiko K3 Konstruksi Dengan Metode Hirarc. vol, 4, 2581-2157.
Wangi, V. K. N. 2020. Dampak kesehatan dan keselamatan kerja, beban kerja, dan lingkungan kerja fisik terhadap kinerja. Jurnal Manajemen Bisnis, 7(1), 40-50.
Downloads
Published
How to Cite
Issue
Section
License
Copyright
The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Quantum Teknika : Jurnal Teknik Mesin Terapan as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by Quantum Teknika : Jurnal Teknik Mesin Terapan prior to the publication. Quantum Teknika : Jurnal Teknik Mesin Terapan strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
Quantum Teknika : Jurnal Teknik Mesin Terapan keep the rights to articles that have been published. Authors are permitted to disseminate published articles by sharing the link to Quantum Teknika : Jurnal Teknik Mesin Terapan website. Authors are allowed to use their works for any purposes deemed necessary without written permission from Quantum Teknika : Jurnal Teknik Mesin Terapan with an acknowledgment of initial publication in this journal.
License
All articles published in Quantum Teknika : Jurnal Teknik Mesin Terapan are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC-BY-NC). You are free to :
1. Share – copy and redistribute the material in any medium or format.
2. Adapt – remix, transform, and build upon the material.
The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:
1. Attribution - you must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
2. NonCommercial - You may not use the material for commercial purposes.
3. No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
