Analisis Kekuatan Bending Komposit Lamina Serat Ijuk Anyam dan Serat Ijuk Acak bermatriks Polyester

Fatkhurrohman Fatkhurrohman, Ismail Ismail, Ferriawan Yudhanto

Abstract


The current automotive industry uses composite materials as an alternative material to replace metal or plastic, due to the advantages of composite materials that have biodegradable properties and support environmental sustainability. Composite materials can be used as car body protectors, as a protector composite materials must withstand compressive loads. Referring to this, the research will be carried out through flexural testing. Study aim is to analyze variations of fiber volume fraction effect to the flexural strength. Method of making composite materials using hand layup then press mold, variations in fiber volume fraction 25%, 30%, 35%, 40%, and 45%. Flexural testing is carried out according to ASTM D-790. The morphology analysis was also carried out on the fractures of result of flexural test. Flexural testing results show that the highest flexural strength is founded in the fiber volume fraction 50% and the lowest flexural strength is founded in the fiber volume fraction 25%, 724.4 MPa and 435.8 MPa, respectively. A suitable composition in the fiber volume fraction of 40% can produce an optimal bond between the matrix and the fiber. Observing the morphology of the fracture and the cross-section of the fracture flexural testing results, it was found that there were fiber fractures with the characteristics of fiber pullout and delamination in each test specimen.

Keywords


Komposit Lamina; Serat Ijuk; Kekuatan Bending; Polyester.

Full Text:

PDF

References


ASTM INTERNATIONAL. 2002. Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. D790. Annual Book of ASTM Standards, i, pp. 1–12.

Elkazaz, E., Crosby, W.A., Ollick, A.M. and Elhadary, M. 2020. Effect of fiber volume fraction on the mechanical properties of randomly oriented glass fiber reinforced polyurethane elastomer with crosshead speeds. Alexandria Engineering Journal, 59(1), pp. 209–216.

Fatkhurrohman, Budi Rochardjo, H.S., Kusumaatmaja, A. and Yudhanto, F. 2020. Extraction and effect of vibration duration in ultrasonic process of cellulose nanocrystal (CNC) from ramie fiber. AIP Conference Proceedings, 2262(September).

Fatkhurrohman, F. and Machmudi, M. 2022. Analysis of the impact strength on laminated polyester composites reinforced sugar palm fiber (SPF) with fiber orientation: random and woven. Jurnal Polimesin, 20(2), pp. 208–212.

Fatkhurrohman and Zunairoh. 2018. Effect of fiber volume fraction to tensile strength in composites polyester reinforced Sugar Palm Fiber (SPF). Journal of Advances in Technology and Engineering Research, 4(6), pp. 222–229.

Girimurugan, R., Shilaja, C., Mayakannan, S., Rajesh, S., and Aravinth, B. 2022. Experimental investigations on flexural and compressive properties of epoxy resin matrix sugarcane fiber and tamarind seed powder reinforced bio-composites. Materials Today: Proceedings, 66-3, p. 822-828.

Kusmono, Hestiawan, H., and Jamasri. 2020. The water absorption , mechanical and thermal properties of chemically treated woven fan palm. Journal Integrative Medicine Research, 9(3), pp. 4410–4420.

Khalid, M.Y., Al Rashid, A., Arif, Z.U., Ahmed, W., Arshad, H. and Zaidi, A.A. 2021. Natural fiber reinforced composites: Sustainable materials for emerging applications. Results in Engineering, 11(July), p. 100263.

Rochardjo, H.S.B., Fatkhurrohman, Kusumaatmaja, A. and Yudhanto, F. 2021. Fabrication of Nanofiltration Membrane based on Polyvinyl Alcohol Nanofibers Reinforced with Cellulose Nanocrystal using Electrospinning Techniques. International Journal of Technology, 12(2), pp. 329–338.

Samlawi, A. K., Arifin, Y. F., and Permana, P. Y. 2018. Pembuatan dan karakterisasi material komposit serat ijuk (arenga pinnata) sebagai bahan baku cover body sepeda motor. SEMHAS ULM, pp. 1–6.

Singh, S., and Gupta, P. K. 2022. Effect of fiber orientation on mechanical properties of jute/carbon/glass hybrid composite. Materials Today: Proceedings, 2214-7853.

Sivakumar, S., Vignesh, V., Vijay A. I., Venkatesan, G., Rabi, B. R. M., and Khan, M. B. 2021. xperimental investigation on tensile and flexural properties of randomly oriented treated palmyra fibre reinforced polyester composites. Materials Today: Proceedings, 46-17, p. 7556-7560.

Sherwani, S.F.K., Zainudin, E.S., Sapuan, S.M., Leman, Z. and Abdan, K. 2021. Mechanical properties of sugar palm (Arenga pinnata wurmb. merr)/glass fiber-reinforced poly(lactic acid) hybrid composites for potential use in motorcycle components. Polymers, 13(18).

Yudha, V., Yudhanto, F., Rochardjo, H. S. B., & Hariyanto, S. D. (2021). Cellulose Microfibers from Salacca Midrib Fiber Isolated by the Mechanical Treatment. Jurnal Selulosa, 11(01), 1-8.

Yudhanto, F., Dhewanto, S.A. and Yakti, S.W. 2019. Karakterisasi Bahan Kampas Rem Sepeda Motor Dari Komposit Serbuk Kayu Jati. Jurnal Quantum: Teknika, 1(1), pp. 19–27.

Zulkifli, Dharmawan, I.B. and Anhar, W. 2020. Analisa pengaruh perlakuan kimia pada serat terhadap kekuatan impak charpy komposit serat sabut kelapa bermatriks epoxy Effect of chemical treatment of composite coir fiber with epoxy matrix on the Charpy impact strength. Jurnal Polimesin, 18(1), pp. 47–52.




DOI: https://doi.org/10.18196/jqt.v4i1.16593

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Quantum Teknika : Jurnal Teknik Mesin Terapan

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Quantum Teknika : Jurnal Teknik Mesin Terapan is indexed by :

 

Office:

Editorial of Quantum Teknika, Building D, Jl. Brawijaya, Tamantirto, Kasihan, Bantul, Yogyakarta.

Telp: (0274) 387656
Fax: (0274) 387646
WA: +62896-7470-8638 (Mirza Yusuf)
Email: jqt@umy.ac.id

Creative Commons License
Quantum Teknika : Jurnal Teknik Mesin Terapan is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.