Pengaruh Misalignment Terhadap Arus Listrik dan Putaran Poros pada Komponen Transmisi Sproket dan Rantai

Authors

  • Romiyadi Romiyadi Politeknik Kampar
  • Yudi Dwianda Politeknik Kampar
  • Widya Sinta Mustika Politeknik Kampar

DOI:

https://doi.org/10.18196/jqt.v5i1.17403

Keywords:

Misalignment, Electric Current, Shaft Rotation Speed, Sprocket, Chain.

Abstract

The sprocket and chain transmission system was used to transmit the rotating force that occurs between two shafts where they can reach it. The sprocket and chain transmission system transfers a movement from the driving source to the moved object. If the maintenance of the sprocket and chain transmission system is carried out only occasionally, the sprocket and chain may cause misalignment. That can affect the machine's performance and cause a breakdown of the machine's components. This study aims to determine the effect of misalignment on the electric current usage and shaft rotation speed in the sprocket and chain transmission system. The leading equipment used in this study is a sprocket and chain alignment kit, while the auxiliary equipment used are ampere meter, tachometer, and other equipment. Measurements of electric current and shaft rotational speed were carried out with a variation of misalignments. The study results show that the increase in the misalignment causes a higher electric current. As for the effect of misalignment on shaft rotational speed, the rise in the misalignment causes the post-rotational rate to lower.

References

Amirullah., Aminuddin. (2017). Rancang Bangun Media Pembelajaran Praktik Alignment. Jurnal Sosial Humaniora dan Pendidikan, 2(1), 59-63, 2017.

Anggara, F. (2020). Validasi Nilai Simulasi Faktor Keamanan Pada Putaran Kritis Poros ST41. Quantum Teknika: Jurnal Teknik Mesin Terapan, 2(1), 32-37.

Darmawan, D. D., Widodo, A., & Haryanto, I. (2016). Misalignment Kopling Dengan Analisis Sinyal Getaran Kondisi Steady State Menggunakan Metode Reverse. Jurnal Teknik Mesin, 4(2), 197-206.

Nawir, R., Dwianda, Y., Febrianton, A., & Irwan, P. (2022). The Effect of Misalignment to Vibration, Electric Current and Shaft Rotation Speed on Gear Transmission. Journal of Ocean, Mechanical and Aerospace-science and engineering-, 66(1), 14-19.

Raharjo, I. A., Widodo, A., and Haryanto, I. (2016). Analisis Misalignment Kopling Pada Mesin Rotary Menggunakan Sinyal Getaran Steady State dengan Metode Rim and Face. Jurnal Teknik Mesin, 4(1), 214-223, 2016.

Romiyadi, R., & Irwan, P. (2020). The Effect of Misalignment to Vibration, Electric Current and Shaft Rotation Speed on The Coupling Transmision. Jurnal Teknik Mesin, 10(2), 73-78.

Tauvana, A. I. (2018). Alignment Coupling dengan Metode Double Diarim and Face. Jurnal Simetris, 9(1), 671-678.

Downloads

Published

2023-11-13

How to Cite

Romiyadi, R., Dwianda, Y., & Mustika, W. S. (2023). Pengaruh Misalignment Terhadap Arus Listrik dan Putaran Poros pada Komponen Transmisi Sproket dan Rantai. Quantum Teknika : Jurnal Teknik Mesin Terapan, 5(1), 1–7. https://doi.org/10.18196/jqt.v5i1.17403

Issue

Vol. 5 No. 1 (2023): October

Section

Articles

License

Copyright

The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Quantum Teknika : Jurnal Teknik Mesin Terapan as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.

Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by Quantum Teknika : Jurnal Teknik Mesin Terapan prior to the publication. Quantum Teknika : Jurnal Teknik Mesin Terapan strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.

Quantum Teknika : Jurnal Teknik Mesin Terapan keep the rights to articles that have been published. Authors are permitted to disseminate published articles by sharing the link to Quantum Teknika : Jurnal Teknik Mesin Terapan website. Authors are allowed to use their works for any purposes deemed necessary without written permission from Quantum Teknika : Jurnal Teknik Mesin Terapan with an acknowledgment of initial publication in this journal.

 

License

All articles published in Quantum Teknika : Jurnal Teknik Mesin Terapan are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC-BY-NC). You are free to :

1. Share – copy and redistribute the material in any medium or format.
2. Adapt – remix, transform, and build upon the material.

The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:

1. Attribution - you must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
2. NonCommercial - You may not use the material for commercial purposes.
3. No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.