Analisa Sistem Pemipaan Menggunakan Metode Manual Kalkulasi dan Simulasi Pipeflow pada PUD. Rumah Potong Hewan Kota Medan
DOI:
https://doi.org/10.18196/jqt.v5i1.19730Keywords:
Piping System, Darcy-Weisbach Equality, Pipeflow Simulation.Abstract
Pressure losses in the piping system cause additional power to the pump which also causes additional operational costs. The main cause of pressure losses in the piping system is the unevenness of the inside area of the pipes and accessories. This research analyzes the piping system in PUD. Medan Slaughterhouse, starting from the loss of compressive energy, capacity, flow speed, efficiency, and power of the piping system and recommending a better piping system than the existing one. Data on the piping system at PUD. Medan Slaughterhouse was analyzed using fluid mechanics equations such as the Darcy-Weisbach equation and then compared with the results of pipe flow simulation calculations. This experiment provides the following information: Discharge 1.4 L/s, Cross-sectional area of Galvanized pipe/Pipe 1 0.0064 m2, Cross-sectional area of PVC pipe/Pipe 2 0.0042 m2, Fluid velocity of Pipe 1 0.0255 m/s, Fluid Speed of Pipe 2 0.333 m/s, Relative Roughness Value of Galvanized Pipe 0.0016, Relative Roughness Value of PVC Pipe 0.000006, Reynold Number of pipe 1 19985, Reynold Number of pipe 2 24075.8, Total Head of Galvanized and PVC Systems 0.16602 m, Galvanized System Total Head 0.17802 m, PVC System Total Head 0.15902 m, Galvanized and PVC System Hydrolysis Power 0.7832 Kw, Galvanized System Hydrolysis Power 0.7834 Kw, PVC System Hydrolysis Power 0.7831 Kw, Galvanized System Pump Efficiency and PVC 14.24%, Galvanized System Pump Efficiency 14.243%, PVC System Pump Efficiency 14.238%, Galvanized and PVC System Pump Power 0.055 Kw, Galvanized System Pump Power 0.055 Kw, PVC System Pump Power 0.055 Kw and the calculation results using pipeflow simulation are relatively the same.References
Amnur Akhyan,Fadhli Fadhli.,2023.”Pengaruh Variasi Tebal Orifice dan Bilangan Reynolds (Re) terhadap Penurunan Tekanan (Pressure Drop) pada Entrance Region”, Quantum Teknika Jurnal Teknik Mesin Terapan Vol4No2 https://journal.umy.ac.id/index.php/qt/index
Dietzel, F. Dakso Sriyono. 1993. Turbin, Pompa dan Kompressor. Jakarta: Erlangga.
Harahap, S., & Fakhrudin, M. I. (2018). Perancangan Pompa Sentrifugal Untuk Water Treatment Plant Kapasitas 0.25 M3/S Pada Kawasan Industri Karawang. Prosiding Semnastek, 1-9.
Mustakim, M., & Syakura, A. 2015. Pengaruh Reynold Number (Re) Terhadap Head Losses Pada Variasi Jenis Belokan Pipa (Berjari–Jari Dan Patah). Turbo: Jurnal Program Studi Teknik Mesin, 3(2).
Rahayu, P., Putri, D. K., Indriyani., & Rosalina, R. N. 2021. Pengaruh Diameter Pipa Pada Aliran Fluida Terhadap Nilai Head Loss. AGITASI: Jurnal Teknik Kimia, 1(2), 23-32.
Ramadon, I. M., & Syuriadi, A. (2016). Analisis Faktor Head Losses Penstock Terhadap Daya Yang Dihasilkan Di Plta Saguling. Jurnal Poli-Teknologi, 15(3), 239-244.
Saleh, M. M., & Widodo, E. (2018). Analisa Kinerja Aliran Fluida dalam Rangkaian Seri dan Paralel dengan Penambahan Tube Bundle pada Pompa Sentrifugal. REM (Rekayasa Energi Manufaktur) Jurnal, 3(2), 71-77.
Sularso, H. T. (2000). Pompa dan kompresor. Edisi Ketujuh Pradnya Paramitha. Jakarta.
Syahputra, S. A. 2018. Pengaruh Reynold Number Terhadap Head Losses Pada Variasi Jenis Belokan Pipa Aliran Dua Fase Searah Horizontal. Ready Star, 1(1), 132-137.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Copyright
The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Quantum Teknika : Jurnal Teknik Mesin Terapan as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by Quantum Teknika : Jurnal Teknik Mesin Terapan prior to the publication. Quantum Teknika : Jurnal Teknik Mesin Terapan strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
Quantum Teknika : Jurnal Teknik Mesin Terapan keep the rights to articles that have been published. Authors are permitted to disseminate published articles by sharing the link to Quantum Teknika : Jurnal Teknik Mesin Terapan website. Authors are allowed to use their works for any purposes deemed necessary without written permission from Quantum Teknika : Jurnal Teknik Mesin Terapan with an acknowledgment of initial publication in this journal.
License
All articles published in Quantum Teknika : Jurnal Teknik Mesin Terapan are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC-BY-NC). You are free to :
1. Share – copy and redistribute the material in any medium or format.
2. Adapt – remix, transform, and build upon the material.
The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:
1. Attribution - you must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
2. NonCommercial - You may not use the material for commercial purposes.
3. No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
