Analisis Pengaruh Bukaan Katup Terhadap Kapasitas dan Efisiensi Pompa Sentrifugal 3 Sudu pada 1600 RPM

Basuki Basuki, Mohammad Munib Rosadi, Retno Eka Pramitasari, Fajar Satriya Hadi, Dian Anisa Rokhmah Wati

Abstract


Fluid is a substance that is capable of flowing. The types of fluids that are often used in everyday life are liquid fluids and gas fluids. To drain the fluid you need a laundry device called a pump. The working principle of the pump is to provide pressure or energy to the fluid. This type of research is experimental research, namely, researchers carry out experiments to obtain data in the form of numbers or quantitative data. Researchers varied the valve openings from 0o, 25o, 45o, and 65o and used a pump rotation of 1600 RPM. This research plan is to determine the effect of valve opening on pump capacity and efficiency. The research results show that the pump capacity and efficiency results at valve openings from 0o to 65o have increased significantly. The greatest capacity and efficiency occur at 65o valve openings with a value of 6 L/M and 43.2%.

Keywords


Fluid; Centrifugal Pump; Head; Capacity.

Full Text:

PDF

References


Akhyan, A., & Fadhli, F. 2023. Pengaruh Variasi Tebal Orifice dan Bilangan Reynolds (Re) terhadap Penurunan Tekanan (Pressure Drop) pada Entrance Region. Quantum Teknika: Jurnal Teknik Mesin Terapan, 4(2), 75-82.

Dietzel, F. Dakso Sriyono. 1993. Turbin, Pompa dan Kompressor. Jakarta: Erlangga.

Harahap, S., & Fakhrudin, M. I. 2018. Perancangan Pompa Sentrifugal Untuk Water Treatment Plant Kapasitas 0.25 M3/S Pada Kawasan Industri Karawang. Prosiding Semnastek, 1-9.

Kristiyono, A. E., & Gunarti, M. R. 2018. Pengaruh Jumlah Sudu Sentrifugal Impeller Terhadap Kapasitas Dan Efisiensi Pompa Sentrifugal. Jurnal 7 Samudra, 3(1), 26-34.

Musyafa, A. A., & Siregar, I. H. 2015. Pengaruh Jumlah Sudu Sentrifugal Impeller Terhadap Kapasitas dan Efisiensi Pompa Sentrifugal. Jurnal Teknik Mesin, 3(3), 136-144.

Nuryanti, S. Z., Andayani, R. D., & Nopian, N. 2020. Analisa Performansi Pompa Sentrifugal Dengan Variasi Kecepatan Putaran Mesin Dan Debit Aliran. TEKNIKA: Jurnal Teknik, 6(2), 134-145.

Rahayu, P., Putri, D. K., Rosalina, R., & Indriyani, N. 2021. Pengaruh Diameter Pipa Pada Aliran Fluida Terhadap Nilai Head Loss. AGITASI: Jurnal Teknik Kimia, 1(2), 23-32.

Sularso, H. T. 2000. Pompa dan kompresor. Edisi Ketujuh Pradnya Paramitha. Jakarta.




DOI: https://doi.org/10.18196/jqt.v5i2.20729

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Quantum Teknika : Jurnal Teknik Mesin Terapan

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Quantum Teknika : Jurnal Teknik Mesin Terapan is indexed by :

 

Office:

Editorial of Quantum Teknika, Building D, Jl. Brawijaya, Tamantirto, Kasihan, Bantul, Yogyakarta.

Telp: (0274) 387656
Fax: (0274) 387646
WA: +62896-7470-8638 (Mirza Yusuf)
Email: jqt@umy.ac.id

Creative Commons License
Quantum Teknika : Jurnal Teknik Mesin Terapan is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.