Analisis Keselamatan dan Kesehatan Kerja pada Stasiun Penggilingan dengan Menggunakan Metode Job Safety Analysis di PT. SGN PG. Rendeng

Authors

  • Akh Sokhibi Fakultas Teknik, Universitas Muria Kudus, Indonesia
  • Yoga Dwi Arifian Fakultas Teknik, Universitas Muria Kudus, Indonesia
  • Daffa Althaaf Andika Program Vokasi, Universitas Muhammadiyah Yogyakarta, Indonesia
  • Andika Wisnujati Program Vokasi, Universitas Muhammadiyah Yogyakarta, Indonesia

DOI:

https://doi.org/10.18196/jqt.v6i1.21800

Keywords:

Occupational Safety and Health, Job Safety Analysis

Abstract

Occupational Safety and Health is a health and safety condition that guarantees workers and others in the workplace that can impact work productivity. The importance of implementing K3 is an obligation for companies to protect workers from work accidents and work-related diseases. One of the companies that needs to be analyzed K3 is PT. SGN PG. RENDENG Kudus. The purpose of this study was to analyze K3 and provide suggestions for improvements at the grinding station of PT. SGN PG. RENDENG. The method used in analyzing Occupational Safety and Health) is Job Safety Analysis (JSA). The results of this study obtained the condition of the position of the APAR which was not by the placement and the lack of knowledge of workers using PPE so that it could have an impact on workers and the company with the potential for unwanted hazards at the grinding station of PT. SGN PG. RENDENG.

References

Britnell, K. W., Coady, P. D., & McDougle, L. M. (2006). Comparison of Occupational Health and Safety Management Systems. The Synergist, 17(7), 38.

Efendi, M. R. P. (2022). Implementasi KEselamatan dan Kesehatan Kerja Karyawan Produksi PT. Perkebunsn Nusantara X Pabrik Gula Gempolkrep. Laporan Kuliah Magang. https://repository.stiedewantara.ac.id/3441/1/Laporan Kuliah Kerja Magang Moch. Rizki Putra Efendi 1961164-1.pdf

Fathimahhayati, L. D., Wardana, M. R., & Gumilar, N. A. (2019). Analisis Risiko K3 Dengan Metode HIRARC Pada Industri Tahu Dan Tempe Kelurahan Selili, Samarinda. Jurnal Rekavasi, 7(1), 62–70.

Kani, B. R., Mandagi, R. J., p Rantung, J., & Malingkas, G. Y. (2013). Keselamatan Dan Kesehatan Kerja Pada Pelaksanaan Proyek Konstruksi (Studi Kasus: Proyek Pt. Trakindo Utama). Jurnal sipil statik, 1(6).

Kementrian Tenaga Kerja dan Transmigrasi RI. (1970). Undang-undang No. 1 Tahun 1970. Undang-Undang Republik Indonesia No. 1 1970.

Listyandini, R., & Suwandi, T. (2019). Faktor Yang Berhubungan Dengan Tindakan Tidak Aman Pada Pekerja di Pabrik Pupuk NPK. HEARTY Jurnal Kesehatan Masyarakat, 7(1), 1–10.

Oditya Putra, I. (2018). Risk Management At Biopharmaceutical and Pharmaceutical Analysis Laboratory of Airlangga University. The Indonesian Journal of Occupational Safety and Health, 7(1), 81–90.

Purnamasari, D. (2010). Penerapan Job Safety Analysis Sebagai Upaya Pencegahan Kecelakaan Kerja di Bagian Pickled PT. Adi Satria Abafi Yogyakarta. Laporan Khusus.

Warisaura, A. D., Yudha, V., & Yudhanto, F. (2022, November). Penyuluhan Upaya Peningkatan Budaya Keselamatan dan Kesehatan Kerja (K3) di Kelompok UMKM Pande Besi Desa Gilangharjo. In Prosiding Seminar Nasional Unimus (Vol. 5).

Downloads

Published

2024-10-31

How to Cite

Sokhibi, A., Yoga Dwi Arifian, Andika, D. A., & Wisnujati, A. (2024). Analisis Keselamatan dan Kesehatan Kerja pada Stasiun Penggilingan dengan Menggunakan Metode Job Safety Analysis di PT. SGN PG. Rendeng. Quantum Teknika : Jurnal Teknik Mesin Terapan, 6(1), 27–33. https://doi.org/10.18196/jqt.v6i1.21800

Issue

Vol. 6 No. 1 (2024): October

Section

Articles

License

Copyright (c) 2024 Quantum Teknika : Jurnal Teknik Mesin Terapan

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright

The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Quantum Teknika : Jurnal Teknik Mesin Terapan as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.

Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by Quantum Teknika : Jurnal Teknik Mesin Terapan prior to the publication. Quantum Teknika : Jurnal Teknik Mesin Terapan strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.

Quantum Teknika : Jurnal Teknik Mesin Terapan keep the rights to articles that have been published. Authors are permitted to disseminate published articles by sharing the link to Quantum Teknika : Jurnal Teknik Mesin Terapan website. Authors are allowed to use their works for any purposes deemed necessary without written permission from Quantum Teknika : Jurnal Teknik Mesin Terapan with an acknowledgment of initial publication in this journal.

 

License

All articles published in Quantum Teknika : Jurnal Teknik Mesin Terapan are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC-BY-NC). You are free to :

1. Share – copy and redistribute the material in any medium or format.
2. Adapt – remix, transform, and build upon the material.

The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:

1. Attribution - you must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
2. NonCommercial - You may not use the material for commercial purposes.
3. No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.