Analisis Perbandingan Simulasi Injeksi Plastik Terhadap Hasil Produk Dalam Software Autodesk Moldflow Pada Produk Air Filter

Authors

  • Zacky Fahd Mustafa Universitas Singaperbangsa Karawang, Indonesia
  • Oleh Universitas Singaperbangsa Karawang, Indonesia
  • Iwan Nugraha Gusniar Universitas Singaperbangsa Karawang, Indonesia

DOI:

https://doi.org/10.18196/jqt.v6i1.22718

Keywords:

Injection Molding, Production Defects, Mold, Moldflow, Simulation

Abstract

This study aims to analyze the comparison between injection molding simulations in Autodesk Moldflow software and the products produced. Simulations are carried out to estimate the presence of production defects in objects, without having to produce the object first. In the simulation, the occurrence of production defects is estimated according to the parameters that have been entered. These production defects include short shots, flash, flowmarks, weld lines, and bubbles. In the production results, defects were found that had been predicted by previous simulations. The simulation results can be considered to be able to predict production defects that will occur in the production process.

References

Alexander, B. (2020). Effect of Air Filter Type on the Performance of the 110 Cc Injection Motorcycle. Scientific Journal of Mechanical Engineering Kinematika, 5(2), 138-149.

Anjasmoro, M., & Hidayat, T. (2023). Analisis Proses Produksi Food Packaging Dan Produk Cacat Pada Proses Produksi. Prosiding Konferensi Nasional Penelitian Dan Pengabdian Universitas Buana Perjuangan Karawang, 3(1), 227-239.

Azhari, M.C. and Pribadi, E.R. (2020). Analisis Faktor Penyebab Kegagalan Produk Box Mapela Hasil Mesin Injeksi Plastik. Jurnal Online Sekolah Tinggi Teknologi Mandala, 15(1), 27–39.

Aziz, A. (2021). Optimasi Helm Industri Ergonomik Beserta Perancangan Dan Simulasi Molding Injeksi. Universitas Islam Indonesia.

Gusniar, I.N. (2018). Metode Pembuatan Paving Block Segi Enam Berbahan Sampah Plastik Dengan Mesin Injection Molding. Barometer, 3(2), 130–133.

Kurniawan, A., Wiratama, A. S., Adam, F. A., Prayoga, H. B., & Prakosa, T. H. (2020). Mengubah Panas Buang Heater Mesin Injeksi Menjadi Energi Listrik dengan Peralatan Berbasis Termoelektrik. Quantum Teknika: Jurnal Teknik Mesin Terapan, 2(1), 8-14.

Mawardi, I. (2019). Proses Manufaktur Plastik dan Komposit: Edisi Revisi. Penerbit Andi.

Prabandono, B., Wibawa, A. S., Yusuf, M., Kurniawan, A., & Nugraha, A. (2024). Analisis Konsistensi Volume Output Pada Nozzle Barrel Mesin Mini Injeksi V-Line Menggunakan Material Plastik Polypropylene ExxonMobil AP03B. Quantum Teknika: Jurnal Teknik Mesin Terapan, 5(2), 68-73.

Ridono, T. W., Gamayel, A., & Zaenudin, M. (2024). Simulasi dan Analisis Desain Mold Dengan Software Autodesk Fusion 360 Untuk Produk Aksesoris. Techno (Jurnal Fakultas Teknik, Universitas Muhammadiyah Purwokerto), 25(1), 11-20.

Widiastuti, H., Surbakti, S. E., Restu, F., Albana, M. H., & Saputra, I. (2019). Identifikasi cacat produk dan kerusakan mold pada proses plastic injection molding. Jurnal Teknologi Dan Riset Terapan (Jatra), 1(2), 76-80.

Downloads

Published

2024-10-31

How to Cite

Mustafa, Z. F., Oleh, & Gusniar, I. N. (2024). Analisis Perbandingan Simulasi Injeksi Plastik Terhadap Hasil Produk Dalam Software Autodesk Moldflow Pada Produk Air Filter. Quantum Teknika : Jurnal Teknik Mesin Terapan, 6(1), 6–11. https://doi.org/10.18196/jqt.v6i1.22718

Issue

Vol. 6 No. 1 (2024): October

Section

Articles

License

Copyright (c) 2024 Quantum Teknika : Jurnal Teknik Mesin Terapan

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright

The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Quantum Teknika : Jurnal Teknik Mesin Terapan as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.

Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by Quantum Teknika : Jurnal Teknik Mesin Terapan prior to the publication. Quantum Teknika : Jurnal Teknik Mesin Terapan strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.

Quantum Teknika : Jurnal Teknik Mesin Terapan keep the rights to articles that have been published. Authors are permitted to disseminate published articles by sharing the link to Quantum Teknika : Jurnal Teknik Mesin Terapan website. Authors are allowed to use their works for any purposes deemed necessary without written permission from Quantum Teknika : Jurnal Teknik Mesin Terapan with an acknowledgment of initial publication in this journal.

 

License

All articles published in Quantum Teknika : Jurnal Teknik Mesin Terapan are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC-BY-NC). You are free to :

1. Share – copy and redistribute the material in any medium or format.
2. Adapt – remix, transform, and build upon the material.

The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:

1. Attribution - you must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
2. NonCommercial - You may not use the material for commercial purposes.
3. No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.