Manufaktur Sampan (Canoe) Dengan Bahan Paduan Aluminium untuk Wisata Sungai

Andika Wisnujati, Mudjijana Mudjijana, Esron Fernando Octantha

Abstract


Specific objectives and targets to be achieved are the new business entrepreneurs in the field of manufacture of canoes (canoe) for water vehicles, especially in the river Winongo and generally in places of tourism in other areas. This new entrepreneur will be made in Kampung Pojok, Sinduadi Urban Village, Mlati Sub-district, Sleman Re-gency, DIY (Winongo west side bank). Canoe manufacturing starts from the design (design) of construction which in this case ask for help 4 students of Mechanical Engineering Department and Industrial Faculty of Engineering UGM. Based on the design drawings can be calculated the amount of aluminum alloy material in the form of a 2 thick plate and pipe ¾ inch for the construction of the amplifier. The cutting of the plate is carried out with the betel in accordance with the drawing (the initial stage) and smoothed with hand grinding prior to connection with the electric welding with aluminum alloy electrodes. Similarly, the reinforcing and buoying rods are sawn with a hand saw (initial stage) and connected with an electric weld. In the end the product is tested in the flow of Winongo River, near the canoe production place in the village of Pojok, Sinduadi, Mlati, Sleman. Canoe products are tested by students of the Yogyakarta Maritime Academy. Test results should show no leakage in each canoe connection when in use and on reliable stability conditions.

 

Keywords: Canoe, Water Vehicle, Winongo River, Reliable, Aluminium


Full Text:

PDF

References


Handbook ASM Internasional The Materials, Vol 1 : 329, Jakarta, 1995.

Irman Azis Wilopo, Budi Harjanto, dan Yuyun estriyanto 2013., Studi kualitas repair welding menggunakan metode oxy acetylene dengan PWHT pada cast wheel alumunium. Universitas Negeri Yogyakarta.

Nofriandy Handra & Peri Indra Yudi 2011. Jurnal Teknik Mesin Vol. 1, No. 1, Oktober 2011: 1-8. Institut Teknologi Padang.

Octantha F.E, (2015). Manufaktur Canoe untuk Kendaraan Air Menggunakan Plat Aluminium AA 5083 H112. Skripsi Program Studi Teknik Mesin, Jurusan Teknik Mesin dan Industri, Fakultas Teknik, Universitas Gadjah Mada. Yogyakarta.

Surdia,T. dan Shinroku, (1982), Pengetahuan Bahan Teknik, PT Pradnya Paramita, Jakarta.

Smith, F. William. (1995), Material Science and engineering. (second edition). New York: McGrawHill inc.

Saputro, Dian Retno. 2010. "Studi Kebutuhan Fasilitas Produksi untuk Galangan Kapal Kecil Aluminium". Jurnal Tugas Akhir. Institut Teknologi Sepuluh Nopember, Surabaya

Wahyuni, Ika, dkk (2017). Uji Kekerasan Material dengan Metode Rockwell. Jurusan Fisika, Faklultas Sains dan Teknologi, Universitas Airlangga. Surabaya.

Yulianto, dkk (2010), Desain Perahu Fiberglass Bantuan LPPM IPB di Desa Cikahuripan, Kecamatan Cisolok, Sukabumi. Institut Pertanian Bogor http://repository.ipb.ac.id/ handle/123456789/62582




DOI: https://doi.org/10.18196/bdr.429

Article Metrics

Abstract view : 0 times
PDF - 2 times

Refbacks

  • There are currently no refbacks.




__________________________________________________________________

View My Stats

Contact us: BERDIKARI : Jurnal Inovasi dan Penerapan Ipteks, Address: Gedung D, LP3M UMY, AlamatJl. Brawijaya, Tamantirto, Kec. Kasihan, Bantul, Daerah Istimewa Yogyakarta 55183. Email: abdimasumy10@gmail.com.