Value-Added, Energy and Technology-Capital in Central Java Industries

Article Sidebar

PDF
Published: Apr 28, 2021
DOI: https://doi.org/10.18196/jesp.v22i1.8926
Keywords:
Value-Added, Energy, Technology, Capital, Spatial, Industry

Main Article Content

Setyo Tri Wahyudi
Department of Economics, Faculty of Economics and Business, Universitas Brawijaya, East Java
Darmawan Darmawan
Department of Economics, Faculty of Economics and Business, Universitas Brawijaya, East Java

Abstract

Nowadays, many industries do not depend on labor intensive, but have transformed to rely on intensive technology. Industry is considered potential strategy to raise value-added for its effort to alter raw or intermediate goods to finished goods. In this study, value-added approach is used to measure the role of technology - capital and energy. A lot of work has been done analyzing restricted variables in single study, but there is still a significant gap where research did not determine differences between measures. This paper aims to discuss the similarities of many technology – capital and energy related variables in Central Java Industries and analyzes their profile change to regional value-added from 2007 to 2017.  Data related to technology – capital and energy are collected from Statistics Indonesia (Badan Pusat Statistik). The variables are examined using exploration factor analysis, multiple linear regression, and cluster analysis. The result shows that the energy consumption has the greatest effect on value-added rising during the study period, while technology - capital does not. Hence, policymaker should maintain the availability of energy for industries. Then, except for Kudus Regency and Semarang Municipality, policymaker should pay attention to the growth of value-added of the entire regions.

Article Details

How to Cite
Wahyudi, S. T., & Darmawan, D. (2021). Value-Added, Energy and Technology-Capital in Central Java Industries. Jurnal Ekonomi &Amp; Studi Pembangunan, 22(1), 75–88. https://doi.org/10.18196/jesp.v22i1.8926
Issue
Vol. 22 No. 1: April 2021
Section
Articles

License

You are free to:

  • Share — copy and redistribute the material in any medium or format
  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Creative Commons License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

References

Abokyi, E., Appiah-Konadu, P., Sikayena, I., & Oteng-Abayie, E. F. (2018). Consumption of electricity and industrial growth in the case of Ghana. Journal of Energy, 1–11. https://doi.org/10.1155/2018/8924835

Al-Thani, S., Skelhorn, C., Amato, A., Koc, M., & Al-Ghamdi, S. (2018). Smart technology impact on neighborhood form for a sustainable Doha. Sustainability, 10(12), 47-64. https://doi.org/10.3390/su10124764

Amin, S. (1975). Accumulation on a world scale. Journal of Contemporary Asia, 5(4), 478-483. https://doi.org/10.1080/00472337508566976

Anggriawan, R., Maskie, G., & Syafitri, W. (2019). Analysis of the performance of the manufacturing industry sector in east Java Province and implications for strategy preparation. International Journal of Scientific and Technology Research, 8(2), 72–77.

Balogun, V. A., & Mativenga, P. T. (2013). Modelling of direct energy requirements in mechanical machining processes. Journal of Cleaner Production, 41, 179–186. https://doi.org/10.1016/j.jclepro.2012.10.015

Battisti, M., & Parmeter, C. F. (2013). Clustering and polarization in the distribution of output : A multivariate perspective q. Journal of Macroeconomics, 35, 144–162. https://doi.org/10.1016/j.jmacro.2012.10.003

Budzianowski, W. M. (2012). Value-added carbon management technologies for low CO 2 intensive carbon-based energy vectors. Energy, 41(1), 280–297. https://doi.org/10.1016/j.energy.2012.03.008

Camiña, E., Díaz-chao, Á., & Torrent-sellens, J. (2020). Automation technologies : Long-term effects for Spanish industrial firms. Technological Forecasting & Social Change, 151. https://doi.org/10.1016/j.techfore.2019.119828

Chen, Y., Liu, B., Shen, Y., & Wang, X. (2017). Spatial analysis of change trend and influencing factors of total factor productivity in China’s regional construction industry. Applied Economics, 50(25), 2824–2843. https://doi.org/10.1080/00036846.2017.1409421

Cleff, T. (2019). Applied statistics and multivariate data analysis for business and economics. Springer Nature Switzerland.

Dilaver, Z., & Hunt, L. C. (2011). Industrial electricity demand for Turkey : A structural time series analysis. Energy Economics, 33(3), 426–436. https://doi.org/10.1016/j.eneco.2010.10.001

Geng, C., & Cui, Z. (2020). Analysis of spatial heterogeneity and driving factors of capital allocation efficiency in energy conservation and environmental protection industry under environmental regulation. Energy Policy, 137. https://doi.org/10.1016/j.enpol.2019.111081

Ghaderi, S.F., Azadeh, M.A., & Mohammadzadeh, S. (2006). Relationship between value-addedand electricity consumption in the Iranian industries. Journal of Applied Sciences, 6(2), 387–390. https://doi.org/10.3923/jas.2006.387.390

Grabowski, R. (2016). Food production and the growth of manufacturing : the case of Tanzania. International Journal of Social Economics, 43(10), 1049–1062. https://doi.org/10.1108/IJSE-12-2014-0264

Hamidi, W., & Elida, S. (2018). Analysis of value-addedand development strategy of public sago agroindustry business in Kepulauan Meranti regency. International Journal of Scientific and Technology Research, 7(2), 94–99.

Johnson, R.A. & Wichern, D. W. (2007). Applied multivariate statistical analysis. Pearson Education.

Kalu, E. U., Daniel, P. B., Nwafor, U. F., Okoyeuzu, C. R., Okoro, O. E. U., & Okechukwu, E. U. (2019). Relating energy consumption to real sector value-addedand growth in a developing economy. International Journal of Energy Sector Management, 13(1), 166–182. https://doi.org/10.1108/ijesm-02-2018-0007

Kapelko, M., & Abbott, M. (2017). Productivity growth and business cycles: Case study of the Spanish construction industry. Journal of Construction Engineering and Management, 143(5). https://doi.org/10.1061/(asce)co.1943-7862.0001238

Liu, B., Chen, Y., Wang, R., Shen, Y., & Shen, Q. (2015). Different interaction mechanisms of market structure in the construction industry TFP from the spatial perspective: A case study in China. KSCE Journal of Civil Engineering, 20(1), 23–33. https://doi.org/10.1007/s12205-015-0444-7

Mooi, E., Sarstedt, M., & Mooi-Reci, I. (2018). Principal component and factor analysis. Market Research. Springer Texts in Business and Economics.

Muchdie, M., & Nurrasyidin, M. (2019). Technological progress and human development: Evidence from Indonesia. Jurnal Ekonomi & Studi Pembangunan, 20(1), 99-111. https://doi.org/10.18196/jesp.20.1.5018

Prishardoyo, B., & Sebayang, L.K. (2013). Identifikasi kualitas pertumbuhan ekonomi daerah, Jurnal Ekonomi & Studi Pembangunan, 14(1), 18-25. Retrieved from https://journal.umy.ac.id/index.php/esp/article/view/1240

Statistics Indonesia-Badan Pusat Statistik (BPS). Badan Pusat Statistik (Jawa Tengah). Retrieved from https://jateng.bps.go.id/

Stewart, F. (1978). Technology and underdevelopment. In The Macmillan Press Ltd (Second Ed). Macmillan.

Wang, Y., Ye, G., Zhang, Y., Mu, P., & Wang, H. (2020). Is the Chinese construction industry moving towards a knowledge- and technology-intensive industry? Journal of Cleaner Production, 259. https://doi.org/10.1016/j.jclepro.2020.120964

Whang, U. (2019). Exports and job creation in South Korea : industry-level analysis. Journal of Korea Trade, 23(1), 2–18. https://doi.org/10.1108/jkt-05-2018-0042

Yao, T., & Cheng, W. (2015). The analysis of the energy consumption of Chinese manufacturing based on the combination forecasting model. Grey Systems: Theory and Application, 5(1), 41–53. https://doi.org/10.1108/gs-11-2014-0044

Yustisia, D., & Sugiyanto, C. (2014). Analisis empiris Environmental Kuznets Curve (EKC) terkait orientasi energi. Jurnal Ekonomi & Studi Pembangunan, 15(2), 161-170. https://journal.umy.ac.id/index.php/esp/article/view/1232

Zheng, J., Zheng, W., Chen, A., Yao, J., Ren, Y., Zhou, C., Wu, J., Ling, W., Bai, B., Wang, W., & Zhang, Z. (2020). Science of the Total Environment Sustainability of unconventional machining industry considering impact factors and reduction methods of energy consumption : A review and analysis. Science of the Total Environment, 722. https://doi.org/10.1016/j.scitotenv.2020.137897