Perancangan Modifikasi Electric Hand Truck dengan Timing Belt untuk Jalan Bertangga
Main Article Content
Abstract
In today's industrial needs, the most common material handling equipment in daily uses is hand truck, because of the price itself is quite cheap, flexible, and easy to operate. However, one of the weaknesses of the hand truck is it can’t through places that have different heights such as stairs. To overcome this problem, the hand truck will be modified using a timing belt which make it possible the hand truck to pass through stairs. The design modification begins with collecting the main hand truck data, followed by making several design concepts, selecting the suitable design modification concept to overcome the staircase problem and finally analyzing and calculating the components used. Design modifications are illustrated in 3D shape using Solidworks software. The result of the modified design is an electric hand truck with a timing belt with dimensions of (1037 x 455 x 1102) mm for stair-climbing with a maximum angle of stair slope equal to 30 degrees which is able to lift a load of 100 kg at a speed of 0.8 m/s.
Article Details
License
JMPM (Jurnal Material dan Proses Manufaktur) is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. You are free to :
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:
-
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
-
ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
References
S. Ray, Introduction to Material Handling, New Delhi: New Age International (P) Limited Publishers, 2008.
Suparno, Teknik Gambar Bangunan Jilid II, Direktorat Jenderal Manajemen Pendidikan Dasar dan Menengah, 2008.
V. C. Patil, C. Swapnil, G. Abhay, S. Niranjan and T. Virendra, “Design and Manufacturing of Automated Staicase Climbing Wheelchair Prototype by Using Belt Drive,” International Journal of Advance Research in Science and Engineering, vol. 07, no. 03, 2018.
Prestar, “Uesugi Product Guide Handtruck,” Osaka, 2020.
R. S. Khurmi and J. S. Gupta, A Textbook of Machine Design, New Delhi: Eurasia Publishing House (PVT.) LTD, 2005.
Sularso and K. Suga, Dasar Perencanaan dan Pemilihan Elemen Mesin, Jakarta: Pradnya Paramita, 2002.
A. Hughes, Electric Motor and Drives, Oxford: Elsevier Ltd., 2006.
Mitsuboshi, “Mitsuboshi Freespan Belt Catalogue,” Tokyo, 2021.
Mitsuboshi, “Design Manual Timing Belt,” Tokyo, 2020.
SKF, “Rolling Bearing Catalogue,” Gothenburg, 2018.
Tsubaki, “Tsubaki Drive and Chain Catalogue,” Osaka, 2013.