Fabrication of Anti-Termite Particle Boards Made from Bintaro (Cerbera Manghas): Analysis of Physical and Mechanical Properties

Delovita Ginting, Nur Azizah

Abstract


Termites are commonly seen as a nuisance due to their capacity to cause harm to wooden objects. The occurrence of termite infestations on furniture has led to a rise in financial damages attributed to such attacks. Hence, it is of utmost need to seek alternative raw materials that exhibit resistance to termite-induced deterioration, thereby fulfilling the requirement for substituting particle board. The present study has successfully demonstrated the fabrication of particle board by including bintaro fruit seed filler and urea formaldehyde matrix. The primary objective of this research endeavor was to explore an alternate approach to standard particle board production, specifically focusing on the development of anti-termite qualities. The filler fraction to matrix fraction comparison exhibits variations of 50:50, 60:40, 70:30, and 80:20. The particle board production process employed in this study utilizes a cold pressing method, wherein a pressure of 15 MPa is applied for a duration of 120 minutes. The board particles that have been acquired are subjected to testing in order to ascertain their physical characteristics, such as density and water content. The experiment was conducted in compliance with the SNI Standard 03-2105-2006. The flexural strength of particle board was evaluated in accordance with the standard SNI 03-2105-2006. An assessment was conducted to evaluate the susceptibility of particle board to termite infestation, in accordance with the guidelines outlined in the SNI 01-7207-2006 standards. The density and moisture content testing findings conducted on particle board match with the specifications outlined in the SNI 03-2105-2006 standard. The experimental outcomes evaluating the susceptibility of board particles to termite infestations have effectively fulfilled the requirements outlined in the SNI 01-7207-2006 standards.

Full Text:

PDF

References


U. Demir, M. Constable, O. Hiasat, and X. Zhao, “Chapter 21 - Biocomposite from novel bioresin with natural biomass,” in Valorization of Biomass to Bioproducts, V. K. Gupta, Ed., Elsevier, 2023, pp. 505–533. doi: https://doi.org/10.1016/B978-0-12-822887-6.00015-2.

F. A. Kamke and M. F. Hamza, “Wood: Nonstructural Panel Processes,” in Reference Module in Materials Science and Materials Engineering, Elsevier, 2016. doi: https://doi.org/10.1016/B978-0-12-803581-8.02220-7.

A. H. Iswanto, T. Sucipto, S. S. D. Nadeak, and W. Fatriasari, “Post-treatment effect of particleboard on dimensional stability and durability properties of particleboard made from sorghum bagasse,” in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, Mar. 2017. doi: 10.1088/1757-899X/180/1/012015.

A. Chotikhun, S. Hiziroglu, B. Kard, C. Konemann, M. Buser, and S. Frazier, “Measurement of termite resistance of particleboard panels made from Eastern redcedar using nano particle added modified starch as binder,” Measurement, vol. 120, pp. 169–174, 2018, doi: https://doi.org/10.1016/j.measurement.2018.02.028.

M. Saxena et al., “Bintaro (Cerbera odollam and Cerbera manghas): an overview of its eco-friendly use, pharmacology, and toxicology,” Environmental Science and Pollution Research, vol. 30, no. 28, pp. 71970–71983, 2023, doi: 10.1007/s11356-022-22585-w.

D. Tarmadi, S. K. Himmi, and S. Yusuf, “The Efficacy of the Oleic Acid Isolated from Cerbera Manghas L. Seed Against a Subterranean Termite, Coptotermes Gestroi Wasmann and a Drywood Termite, Cryptotermes Cynocephalus Light,” Procedia Environ Sci, vol. 20, pp. 772–777, 2014, doi: https://doi.org/10.1016/j.proenv.2014.03.093.

A. Zikri, Erlinawati, P. L. Sutini, M. Agus, and S. Fathona, “Biodiesel Production from Bintaro (Cerbera Manghas L) Seeds with Potassium Hydroxide as Catalyst,” in Journal of Physics: Conference Series, Institute of Physics Publishing, May 2020. doi: 10.1088/1742-6596/1500/1/012084.

A. N. Putri, D. Ginting, R. F. Syaputra, and D. F. Perdana, “Sintesis dan karakterisasi pembuatan cat anti jamur berbahan dasar ekstrak biji bintaro (Cerbera manghas) sebagai aditif Synthesis and characterization of anti-fungal paint production based on bintaro (Cerbera manghas) seed extract as additive,” J. Aceh Phys. Soc, vol. 12, no. 1, p. 2023, doi: 10.24815/jacps.v12i1.27930.

D. Ginting, M. S. 1+, and K. Sukma, “Characteristics of Anti-Termite Particle Board From Bintaro Fruit Fiber With Bintaro Fruit Seed Extract Coating Using Spray Coating Method,” Geophysics, Instrumentation and Theoretical Physics-fiziya, vol. 5, doi: 10.15408/fiziya.v5i2.31241.

A. Harshavardhan and L. Muruganandam, “Preparation and characteristic study of particle board from solid waste,” in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, Dec. 2017. doi: 10.1088/1757-899X/263/3/032005.

C. E. Ferrández-García, A. Ferrández-García, M. Ferrández-Villena, J. F. Hidalgo-Cordero, T. García-Ortuño, and M. T. Ferrández-García, “Physical and mechanical properties of particleboard made from palm tree prunings,” Forests, vol. 9, no. 12, Dec. 2018, doi: 10.3390/f9120755.

A. Harshavardhan and L. Muruganandam, “Preparation and characteristic study of particle board from solid waste,” in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, Dec. 2017. doi: 10.1088/1757-899X/263/3/032005.

M. J. A. Eng, Z. Hussein‫, T. Ashour‫, M. H. Khalil‫, Bahnasaw, and Adel H, “Biological Engineering Mechanical Properties of Particleboard Panels Made From Agricultural Wastes,” 2018

.‬‬‬

Z. Tao, Z. Youcai, and E. Atta Nyankson, “Chapter 14 - Composite board production of organic waste and combustion performance of fine screenings from municipal solid waste,” in Resource Recovery Technology for Municipal and Rural Solid Waste, Z. Tao, Z. Youcai, and E. Atta Nyankson, Eds., Elsevier, 2023, pp. 215–237. doi: https://doi.org/10.1016/B978-0-323-98978-7.00001-4.

Sunardi et al., “Particleboard characterization using sawdust from sengon wood, mahogany wood, bayur wood, and rice husk ash as composite fillers,” in IOP Conference Series: Materials Science and Engineering, IOP Publishing Ltd, Dec. 2020. doi: 10.1088/1757-899X/909/1/012028.

N. Fitri, Mursal, and I. Ismail, “Physical and chemical properties of particleboard made of rice straw and plastic waste,” in Journal of Physics: Conference Series, Institute of Physics Publishing, Mar. 2020. doi: 10.1088/1742-6596/1460/1/012146.

L. Astari, Sudarmanto, and F. Akbar, “Characteristics of Particleboards Made from Agricultural Wastes,” in IOP Conference Series: Earth and Environmental Science, Institute of Physics Publishing, Oct. 2019. doi: 10.1088/1755-1315/359/1/012014.

D. Hammiche, “Chapter 7 - Bio fillers for biocomposites,” in Wool Fiber Reinforced Polymer Composites, S. Thomas and S. Jose, Eds., Woodhead Publishing, 2022, pp. 121–140. doi: https://doi.org/10.1016/B978-0-12-824056-4.00009-1.

A. H. Iswanto, F. Febrianto, Y. S. Hadi, S. Ruhendi, and D. Hermawan, “The Effect of Pressing Temperature and Time on the Quality of Particle Board Made from Jatropha Fruit Hulls Treated in Acidic Condition,” MAKARA Journal of Technology Series, vol. 17, no. 3, Feb. 2014, doi: 10.7454/mst.v17i3.2930.

T. Kibet, D. R. Tuigong, O. Maube, and J. I. Mwasiagi, “Mechanical properties of particleboard made from leather shavings and waste papers,” Cogent Eng, vol. 9, no. 1, 2022, doi: 10.1080/23311916.2022.2076350.

B. Jian et al., “A Review on Flexural Properties of Wood-Plastic Composites,” Polymers, vol. 14, no. 19. MDPI, Oct. 01, 2022. doi: 10.3390/polym14193942.

M. R. Lubis, T. Maimun, J. Kardi, and R. B. Masra, “Characterizing Particle Board Made of Oil Palm Empty Fruit Bunch Using Central Composite Design,” Makara J Sci, vol. 22, no. 1, Mar. 2018, doi: 10.7454/mss.v22i1.6988.

Y. Boussès, N. Brulat-Bouchard, P.-O. Bouchard, H. Abouelleil, and Y. Tillier, “Theoretical prediction of dental composites yield stress and flexural modulus based on filler volume ratio,” 2019, doi: 10.1016/j.dental.2019.10.012ï.

M. Ramesh, L. N. Rajeshkumar, N. Srinivasan, D. V. Kumar, and D. Balaji, “Influence of filler material on properties of fiber-reinforced polymer composites: A review,” E-Polymers, vol. 22, no. 1. Walter de Gruyter GmbH, pp. 898–916, Jan. 01, 2022. doi: 10.1515/epoly-2022-0080.

P. Boruszewski, P. Borysiuk, A. Jankowska, and J. Pazik, “Low-Density Particleboards Modified with Expanded and Unexpanded Fillers—Characteristics and Properties,” Materials, vol. 15, no. 13, Jul. 2022, doi: 10.3390/ma15134430.

D. Tarmadi, S. K. Himmi, and S. Yusuf, “The Efficacy of the Oleic Acid Isolated from Cerbera Manghas L. Seed Against a Subterranean Termite, Coptotermes Gestroi Wasmann and a Drywood Termite, Cryptotermes Cynocephalus Light,” Procedia Environ Sci, vol. 20, pp. 772–777, 2014, doi: 10.1016/j.proenv.2014.03.093.

M. S. Nazir et al., “Toxicity and Repellency of Plant Extract and Termiticide against Fungus Growing Subterranean Termites (Blattodea: Termitidae),” Journal of Bioresource Management, vol. 9, no. 2, 2022, [Online]. Available: https://corescholar.libraries.wright.edu/jbm

D. Tarmadi, S. K. Himmi, and S. Yusuf, “The Efficacy of the Oleic Acid Isolated from Cerbera Manghas L. Seed Against a Subterranean Termite, Coptotermes Gestroi Wasmann and a Drywood Termite, Cryptotermes Cynocephalus Light,” Procedia Environ Sci, vol. 20, pp. 772–777, 2014, doi: 10.1016/j.proenv.2014.03.093.




DOI: https://doi.org/10.18196/jmpm.v7i2.19724

Refbacks

  • There are currently no refbacks.


 

Editorial Office :

JMPM (Jurnal Material dan Proses Manufaktur)

Department of Mechanical Engineering, Faculty of Engineering, Universitas Muhammadiyah Yogyakarta.

Jl. Brawijaya Tamantirto Kasihan Bantul 55183 Indonesia

Email: jmpm@umy.ac.id

 (62)274-387656     (62)274-387656    0895358065162