Multi Aspect Optimization of Milling Machines : Review

Article Sidebar

PDF
Published: Jun 1, 2024
DOI: https://doi.org/10.18196/jmpm.v8i1.21088

Main Article Content

Mohamad Ardy Firmansyah
Mechanical Engineering Department, Mercu Buana University
https://orcid.org/0009-0007-8268-4408
Hadi Pranoto
Mechanical Engineering Department, Mercu Buana University

Abstract

Modern manufacturing supports various aspects of modern life. Modern manufacturing right now is focused on the application of artificial intelligence, acceleration of production, automation production, sustainability and environmental protection. A milling machine is a tool supports in a series of production processes. Its existence supports the production process which is part of the modern manufacturing system. In operating milling machines, several problems that occur, starting from operations, machine capacity, and predictions of machine or tool usage. This study summarizes and reviews previous studies in order to collecting types of milling machine optimization. Multi-aspect optimization obtained includes: optimization with a tool life prediction approach, optimization with a milling process approach, optimization with modification or retrofit, optimization with a production yield approach and finally optimization with operational time. With the results obtained, it is hoped that it can contribute to the optimization of milling machines in the modern manufacturing world. It is hoped that future research will be able to carry out in-depth analysis of each aspect of milling machine optimization has been mentioned.

Article Details

How to Cite
Firmansyah, M. A., & Pranoto, H. (2024). Multi Aspect Optimization of Milling Machines : Review. JMPM (Jurnal Material Dan Proses Manufaktur), 8(1), 10–15. https://doi.org/10.18196/jmpm.v8i1.21088
Issue
Vol. 8 No. 1 (2024): Juni
Section
Articles

License

Creative Commons License


JMPM (Jurnal Material dan Proses Manufaktur) is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. You are free to :

  1. Adapt — remix, transform, and build upon the material for any purpose, even commercially.

The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

  • ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.

Author Biography

Mohamad Ardy Firmansyah, Mechanical Engineering Department, Mercu Buana University

Mechanical Engineering Department, Mercu Buana University

References

REFERENCES

M. P. Groover, Fundamentals of Modern Manufacturing Materials, Processes, and Systems, 4th ed. Pennsylvania: John Wiley & SOns, Inc, 2016.

K. Cheng and R. J. Bateman, “e-Manufacturing: Characteristics, applications and potentials,” Prog. Nat. Sci., vol. 18, no. 11, pp. 1323–1328, 2008, doi: 10.1016/j.pnsc.2008.03.027.

E. Attiah, “The Role of Manufacturing and Service Sectors in Economic Growth: An Empirical Study of Developing Countries,” Eur. Res. Stud. J., vol. XXII, no. Issue 1, pp. 112–127, 2019, doi: 10.35808/ersj/1411.

K. Kumar and J. P. Davim, Modern Manufacturing Processes. Woodhead Publishing, 2020.

T. Childs, Metal Machining. New York: Arnold, 2000. doi: 10.1016/c2009-0-23990-0.

A. P. Acal and A. S. Lobera, “Virtual reality simulation applied to a numerical control milling machine,” Int. J. Interact. Des. Manuf., vol. 1, no. 3, pp. 143–154, 2007, doi: 10.1007/s12008-007-0016-2.

A. C. M. Bekker and J. C. Verlinden, “Life cycle assessment of wire + arc additive manufacturing compared to green sand casting and CNC milling in stainless steel,” J. Clean. Prod., vol. 177, pp. 438–447, 2018, doi: 10.1016/j.jclepro.2017.12.148.

M. Rybicki, “Problems during milling and roughness registration of free-form surfaces,” J. Phys. Conf. Ser., vol. 483, no. 1, 2014, doi: 10.1088/1742-6596/483/1/012007.

W. Andriani, “Penggunaan Metode Sistematik Literatur Review dalam Penelitian Ilmu Sosiologi,” J. PTK dan Pendidik., vol. 7, no. 2, 2022, doi: 10.18592/ptk.v7i2.5632.

M. Waruwu, “Pendekatan Penelitian Pendidikan: Metode Penelitian Kualitatif, Metode Penelitian Kuantitatif dan Metode Penelitian Kombinasi (Mixed Method),” J. Pendidik. Tambusai , vol. 7, no. 1, pp. 2896–2910, 2023.

R. Almestahiri, S. Rundle-Thiele, J. Parkinson, and D. Arli, “The Use of the Major Components of Social Marketing: A Systematic Review of Tobacco Cessation Programs,” Soc. Mar. Q., vol. 23, no. 3, pp. 232–248, 2017, doi: 10.1177/1524500417704813.

Q. Nurlaila, “Analisa Umur Alat Potong Mesin Milling Dengan Material Sus 420,” PROFISIENSI J. Progr. Stud. Tek. Ind., vol. 8, no. 2, pp. 143–153, 2020, doi: 10.33373/profis.v8i2.2796.

I. B. Shah and K. R. Gawande, “Optimization of cutting tool life on CNC milling machine through design of experiments-A suitable approach - An overview,” Int. J. Eng. Adv. Technol., vol. 1, no. 4, pp. 188–194, 2012.

A. Afkhamifar, D. Antonelli, and P. Chiabert, “Variational Analysis for CNC Milling Process,” Procedia CIRP, vol. 43, pp. 118–123, 2016, doi: 10.1016/j.procir.2016.02.164.

M. K. Herliansyah, “Pengembangan CNC Retrofit Milling untuk Meningkatkan Kemampuan Mesin Milling Manual Dalam Pemesinan,” Forum Tek., vol. 29, no. 1, pp. 62–70, 2005.

M. T. Yan, M. H. Lee, and P. L. Yen, “Theory and application of a combined self-tuning adaptive control and cross-coupling control in a retrofit milling machine,” Mechatronics, vol. 15, no. 2, pp. 193–211, 2005, doi: 10.1016/j.mechatronics.2004.07.011.

S. Sridevi, J. Dhanasekar, and G. Manikandan, “A methodology of retrofitting for CNC vertical milling machine,” Proc. 2015 Int. Conf. Robot. Autom. Control Embed. Syst. RACE 2015, no. February, pp. 18–21, 2015, doi: 10.1109/RACE.2015.7097257.

G. Kiswanto, D. L. Zariatin, and T. J. Ko, “The effect of spindle speed, feed-rate and machining time to the surface roughness and burr formation of Aluminum Alloy 1100 in micro-milling operation,” J. Manuf. Process., vol. 16, no. 4, pp. 435–450, 2014, doi: 10.1016/j.jmapro.2014.05.003.

C. Sovannara, T. Widagdo, M. Yunus, and A. A. Sani, “Analisa Pengaruh Proses Permesinan Mesin Cnc Milling Terhadap Kekasaran Permukaan Pada Material Baja 9smn36 1.0736,” J. Austenit, vol. 8, no. 2, pp. 27–32, 2016.

C. K. Chang and H. S. Lu, “Design optimization of cutting parameters for side milling operations with multiple performance characteristics,” Int. J. Adv. Manuf. Technol., vol. 32, no. 1–2, pp. 18–26, 2007, doi: 10.1007/s00170-005-0313-5.

M. F. M. Gilang, S. Wirawan, D. Rahmat, D. H. Al, A. Roziqin, and A. Hangga, “MACHINING TIME OPTIMIZATION OF SURFACE FINISHING CNC MILLING PROCESS ON STEEL WORKS 2311,” vol. 23, no. 1, pp. 12–19, 2023.

I. H. Garbie, “Sustainability Optimization in Manufacturing Enterprises,” Glob. Conf. Sustain. Manuf., vol. 12, pp. 504–509, 2015.

J. Liu and Y. Ma, “A survey of manufacturing oriented topology optimization methods,” Adv. Eng. Softw., vol. 100, pp. 161–175, 2016, doi: 10.1016/j.advengsoft.2016.07.017.

J. Plocher and A. Panesar, “Review on design and structural optimisation in additive manufacturing : Towards next-generation lightweight structures,” Mater. Des., vol. 183, p. 108164, 2019.