Validasi Nilai Simulasi Faktor Keamanan Pada Putaran Kritis Poros ST41

Fajar Anggara


A Shaft has been widely used in machinery construction, transmitting power from one component to another. Firstly, the shaft must be calculated for its safety factor before being used for the actual application. In this study, the specimen used for testing was ST 41 material. The safety factor is essential for engineering design, used to evaluate that machine elements' system is guaranteed safety with minimal dimensions. The way to nd the safety factor of this test tool is to use actual calculations and simulations on the Solidworks software. The value of the safety factor obtained from the calculation will be compared with SolidWorks software's simulation results. The results obtained in a calculation analysis for the actual stress of 6,65x106 N/m2 and the safety factor of 55, while for the actual stress (von Mises) in a simulation of 6,8x106 N/m2 and its safety factor of 54. After validating the data, there is a difference of 1.1% for the actual stress and 0.9% for the value of its safety factor.


Shaft, ST 41 material, Safety Factor, Solidworks

Full Text:



Abidin, Z., & Rama, B. R. (2015). Analisa Distribusi Tegangan dan Defleksi Connecting Rod pada Sepeda Motor 100 cc Menggunakan Metode Elemen Hingga. Jurnal Rekayasa Mesin (Vol. 15 No. 1), 30-39.

AZoM. (2012, Juli 5). AISI 1018 Mild/Low Carbon Steel. Retrieved from AZO MATERIALS:

Budynas, R. G., & Nisbett, J. K. (2015). Mechanical Engineering Design, Tenth Edition. New York: McGraw-Hill.

Hidayat, S. (2013). Kaji Teoritis Kekuatan Hand Tractor Gear Box. Bandung: Universitas Pasundan.

Sularso, & Suga, K. (2002). Dasar Perancangan dan Pemilihan Elemen Mesin. Jakarta: PT. Pradnya Paramita.


Article Metrics

Abstract view : 67 times
PDF - 108 times


  • There are currently no refbacks.

Quantum Teknika : Jurnal Teknik Mesin Terapan is indexed by :




Program Studi D3 Teknik Mesin, UMY

Program Vokasi

Redaksi Quantum Teknika UMY, Jalan Brawijaya, Tamantirto, Kasihan, Bantul, Daerah Istimewa Yogyakarta 55183
Telp: (0274) 387656
Fax: (0274) 387646
WA: +62896-7470-8638 (Mirza Yusuf)

Creative Commons License
Quantum Teknika : Jurnal Teknik Mesin Terapan is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.