Simulasi Pembebanan Komponen Bender pada Desain Mesin Begel Fabricator Menggunakan Software Autodesk Inventor 2020
DOI:
https://doi.org/10.18196/jqt.v2i2.11581Keywords:
Begel, Bender, FEA, Inventor, Begel Fabricator MachineAbstract
Stress analysis of the bender components in the design of the begel fabricator machine was carried out using FEA (Finite Element Analysis) with three variations of the constituent material parameters, namely 6061 aluminum, mild steel, and cast iron with a modulus of elasticity of 68.9 GPa, 220 GPa, 120.5 GPa, respectively. The test is carried out by a loading parameter 2520 MPa and fixed constraint. The maximum von misses stress and displacement obtained for each material parameter components using aluminum, mild steel, and cast iron are 17.78 MPa; 0.00765, 17.49 MPa; 0.00229, 17.62 MPa; 0.00427 respectively.
References
Afolabi, S. O., Oladapo, B. I., Ijagbemi, C. O., Adeoye, A. O. M., & Kayode, J. F. (2019). Design and finite element analysis of a fatigue life prediction for safe and economical machine shaft. Journal of Materials Research and Technology, 8(1), 105–111. https://doi.org/10.1016/j.jmrt.2017.10.00 7
Budynas, R., & Nisbett, J. K. (2011). Shigley’s Mechanical Enginering Design (9th ed.). McGrawHill.
Deepu, S., Vishnu, R. S., Harish, M. T., & Bhavani, R. R. (2018). An Experimental Study of Force Involved in Manual Rebar Bending Process. IOP Conference Series: Materials Science and Engineering, 310(1). https://doi.org/10.1088/1757- 899X/310/1/012050
Hariyanto, S.D., Papasi, R.G., Munthohani, G.R., Lanekri, I.T. and Sastika, I.P., 2020. Perancangan dan Fabrikasi Mesin Pengolah Ubi Kayu untuk Produksi Makanan Ringan Lanting Kapasitas 40 kg/jam. Quantum Teknika: Jurnal Teknik Mesin Terapan, 2(1), pp.38-46.
Shah, A. K., Kumar, N., Vignesh, M., & Khanna, P. (2019). Design and fabrication of automatic rebar bending machine. 2018 International Conference on Computing, Power and Communication Technologies, GUCON 2018, 1010–1013. https://doi.org/10.1109/GUCON.2018.86 75068
Subagiyo, Sarjiyana, & Wirawan. (2017). Analisis kekuatan tarik besi beton ulir berdasarkan diameternya. Seminar Nasional Terapan Teknologi 2016 POLINEMA, November 2016, 97–101.
Yaghmour, B. B., Qwasmh, S. H., & Abuafifeh, I. F. (2018). Automatic Rebar Bending Machine to Form Rectangular Stirrups.
Downloads
Published
How to Cite
Issue
Section
License
Copyright
The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Quantum Teknika : Jurnal Teknik Mesin Terapan as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by Quantum Teknika : Jurnal Teknik Mesin Terapan prior to the publication. Quantum Teknika : Jurnal Teknik Mesin Terapan strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
Quantum Teknika : Jurnal Teknik Mesin Terapan keep the rights to articles that have been published. Authors are permitted to disseminate published articles by sharing the link to Quantum Teknika : Jurnal Teknik Mesin Terapan website. Authors are allowed to use their works for any purposes deemed necessary without written permission from Quantum Teknika : Jurnal Teknik Mesin Terapan with an acknowledgment of initial publication in this journal.
License
All articles published in Quantum Teknika : Jurnal Teknik Mesin Terapan are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC-BY-NC). You are free to :
1. Share – copy and redistribute the material in any medium or format.
2. Adapt – remix, transform, and build upon the material.
The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:
1. Attribution - you must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
2. NonCommercial - You may not use the material for commercial purposes.
3. No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
