Simulasi Pembebanan Komponen Bender pada Desain Mesin Begel Fabricator Menggunakan Software Autodesk Inventor 2020

Satriawan Dini Hariyanto, Wikan Kurniawan

Abstract


Stress analysis of the bender components in the design of the begel fabricator machine was carried out using FEA (Finite Element Analysis) with three variations of the constituent material parameters, namely 6061 aluminum, mild steel, and cast iron with a modulus of elasticity of 68.9 GPa, 220 GPa, 120.5 GPa, respectively. The test is carried out by a loading parameter 2520 MPa and fixed constraint. The maximum von misses stress and displacement obtained for each material parameter components using aluminum, mild steel, and cast iron are 17.78 MPa; 0.00765, 17.49 MPa; 0.00229, 17.62 MPa; 0.00427 respectively.



Keywords


Begel, Bender, FEA, Inventor, Begel Fabricator Machine

Full Text:

PDF

References


Afolabi, S. O., Oladapo, B. I., Ijagbemi, C. O., Adeoye, A. O. M., & Kayode, J. F. (2019). Design and finite element analysis of a fatigue life prediction for safe and economical machine shaft. Journal of Materials Research and Technology, 8(1), 105–111. https://doi.org/10.1016/j.jmrt.2017.10.00 7

Budynas, R., & Nisbett, J. K. (2011). Shigley’s Mechanical Enginering Design (9th ed.). McGrawHill.

Deepu, S., Vishnu, R. S., Harish, M. T., & Bhavani, R. R. (2018). An Experimental Study of Force Involved in Manual Rebar Bending Process. IOP Conference Series: Materials Science and Engineering, 310(1). https://doi.org/10.1088/1757- 899X/310/1/012050

Hariyanto, S.D., Papasi, R.G., Munthohani, G.R., Lanekri, I.T. and Sastika, I.P., 2020. Perancangan dan Fabrikasi Mesin Pengolah Ubi Kayu untuk Produksi Makanan Ringan Lanting Kapasitas 40 kg/jam. Quantum Teknika: Jurnal Teknik Mesin Terapan, 2(1), pp.38-46.

Shah, A. K., Kumar, N., Vignesh, M., & Khanna, P. (2019). Design and fabrication of automatic rebar bending machine. 2018 International Conference on Computing, Power and Communication Technologies, GUCON 2018, 1010–1013. https://doi.org/10.1109/GUCON.2018.86 75068

Subagiyo, Sarjiyana, & Wirawan. (2017). Analisis kekuatan tarik besi beton ulir berdasarkan diameternya. Seminar Nasional Terapan Teknologi 2016 POLINEMA, November 2016, 97–101.

Yaghmour, B. B., Qwasmh, S. H., & Abuafifeh, I. F. (2018). Automatic Rebar Bending Machine to Form Rectangular Stirrups.




DOI: https://doi.org/10.18196/jqt.v2i2.11581

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Quantum Teknika : Jurnal Teknik Mesin Terapan

License URL: https://creativecommons.org/licenses/by-nc/4.0/

Quantum Teknika : Jurnal Teknik Mesin Terapan is indexed by :

 

Office:

Editorial of Quantum Teknika, Building D, Jl. Brawijaya, Tamantirto, Kasihan, Bantul, Yogyakarta.

Telp: (0274) 387656
Fax: (0274) 387646
WA: +62896-7470-8638 (Mirza Yusuf)
Email: jqt@umy.ac.id

Creative Commons License
Quantum Teknika : Jurnal Teknik Mesin Terapan is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.