Analisis Kekerasan Hasil Pengelasan Gas Tungsten Arc Welding pada Baja ST 37 dengan Variasi Media Pendingin

Authors

  • Gede Agus Widiantara Progam Studi Pendidikan Teknik Mesin, Fakultas Teknik dan Kejuruan, Universitas Pendidikan Ganesha, Singaraja
  • I Nyoman Pasek Nugraha Progam Studi Pendidikan Teknik Mesin, Fakultas Teknik dan Kejuruan, Universitas Pendidikan Ganesha, Singaraja
  • Kadek Rihendra Dantes Progam Studi Pendidikan Teknik Mesin, Fakultas Teknik dan Kejuruan, Universitas Pendidikan Ganesha, Singaraja

DOI:

https://doi.org/10.18196/jqt.v3i1.12245

Keywords:

Cooling Media, Hardness, ST 37.

Abstract

Cooling media is a substance that increases the hardness value of a material through a heat-treatment process. This study aims to determine the effect of cooling media on the hardness of ST 37 steel due to Gas Tungsten Arc Welding (GTAW). The independent variables, namely water cooling media, seawater cooling media, and oil cooling media, while the dependent variable is the hardness. The specimens using water cooling media, the hardness in the weld area is 47.19 kg/mm2, in the HAZ area the it is 54.6 kg/mm2, and the base metal gets a value of 40.87 kg/mm2. While the specimens with seawater cooling media get a value in the weld area of 76.37 kg/mm2, in the HAZ area it gets a value of 83.89 kg/mm2 and the base metal gets a value of 70.13 kg/mm2. The specimens with oil cooling media the value in the weld area is 40.77 kg/mm2, in the HAZ area it gets a value of 43.32 kg/mm2 and the base metal gets a value of 36.09 kg/mm2 . From the hardness values obtained, specimens immersed in seawater cooling media have the higher hardness values compared than water and oil cooling media.

References

Purwohandoyo, D. A. 2018. Pengaruh Variasi Media Pendingin (Air Laut, Air Sumur dan Oli Sae 40) terhadap Sifat Fisis Dan Kekerasan Hasil Pengecoran Kuningan (CuZn) Menggunakan Cetakan Pasir CO2. (Diploma thesis, Universitas Muhammadiyah Surakarta).

Darma, K. B. S., Widayana, G., & Nugraha, I. N. P. 2017. Pengaruh Media Pendinginan Terhadap Sifat Mekanik Hasil Pengelasan Material ST 37. Jurnal Pendidikan Teknik Mesin Undiksha, 5(1).

Imawan, D. 2017. Pengaruh Variasi Pendinginan pada Proses Quenching terhadap Nilai Kekerasan, Struktur Mikro dan Ketangguhan Hasil Pengecoran Aluminium Limbah Piston. (Skripsi, Universitas Negeri Semarang).

Kolo, J. M., Nugraha, I. N. P., & Widayana, G. 2017. Pengaruh Variasi Arus terhadap Kekuatan Impact dan Kekerasan Material ST 37 Menggunakan Proses Pengelasn Gas Tungsten Arc Welding (GTAW). Jurnal Pendidikan Teknik Mesin Undiksha, 5(2).

Nurisna, Z., & Setiawan, E. 2020. Pengaruh Filler Pada Pengelasan Tig Baja Karbon dan Stainless Steel 316L terhadap Sifat Mekanik. Quantum Teknika: Jurnal Teknik Mesin Terapan, 1(2), 95-99.

Downloads

Published

2021-10-26

How to Cite

Widiantara, G. A., Pasek Nugraha, I. N., & Dantes, K. R. (2021). Analisis Kekerasan Hasil Pengelasan Gas Tungsten Arc Welding pada Baja ST 37 dengan Variasi Media Pendingin. Quantum Teknika : Jurnal Teknik Mesin Terapan, 3(1), 13–16. https://doi.org/10.18196/jqt.v3i1.12245

Issue

Vol. 3 No. 1 (2021): October

Section

Articles

License

Copyright

The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Quantum Teknika : Jurnal Teknik Mesin Terapan as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.

Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by Quantum Teknika : Jurnal Teknik Mesin Terapan prior to the publication. Quantum Teknika : Jurnal Teknik Mesin Terapan strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.

Quantum Teknika : Jurnal Teknik Mesin Terapan keep the rights to articles that have been published. Authors are permitted to disseminate published articles by sharing the link to Quantum Teknika : Jurnal Teknik Mesin Terapan website. Authors are allowed to use their works for any purposes deemed necessary without written permission from Quantum Teknika : Jurnal Teknik Mesin Terapan with an acknowledgment of initial publication in this journal.

 

License

All articles published in Quantum Teknika : Jurnal Teknik Mesin Terapan are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC-BY-NC). You are free to :

1. Share – copy and redistribute the material in any medium or format.
2. Adapt – remix, transform, and build upon the material.

The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:

1. Attribution - you must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
2. NonCommercial - You may not use the material for commercial purposes.
3. No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.