Analisis Kekuatan pada Pengembangan Desain Shelf pada Base Cabinet dengan Analisis Elemen Hingga menggunakan Perangkat Lunak Solidworks CAE
DOI:
https://doi.org/10.18196/jqt.v6i1.19979Keywords:
Strength analysis, displacement, shelf, base cabinet, CAEAbstract
ATMI Duta Engineering company is a manufacturing company engaged in the field of sheet metal with a material cutting process using laser cutting technology. Sheet metal products produced at ATMI Duta Engineering company is very diverse, one of which is the base cabinet. The base cabinet has main components, one of which is the shelf. Based on the data obtained from the interview process, there are problems, namely the shelf has never been analyzed, there are no finished products, and there is a risk of damage due to excessive loading. The solution to the shelf problem is to carry out a shelf design analysis using the finite element analysis method through Solidworks CAE software. The CAE simulation was applied to 27 variations of the shelf design by combining 3 test variables, namely the shelf model, the reinforcement model, and the thickness of the material. The material used in the simulation is SPCC material with a thickness of 1mm, 1.2mm and 1.5mm. The CAE simulation results obtained are then compared with reference to the SEFA 8M-2016 standard. The loading given in the CAE simulation is ± 108 kg (1.2 SEFA standards). The strongest variation obtained from the elimination process is variation 19 with a combination of shelf model 1 design, reinforcement model A, and with a material thickness of 1.5mm. Variation 19 meets the SEFA 8M-2016 standard because the displacement value is 1.065mm and this value is smaller than 6.35mm.
References
Abedini, A., Narayanan, A., & Butcher, C. (2022). An investigation into the characterization of the hardening response of sheet metals using tensile and shear tests with surface strain measurement. Forces in Mechanics, 7, 100090.
Bagaskoro, B. B., & Ariatedja, J. B. (2019). Analisis Torsional Rigidity dan Uji Tabrak pada Chassis Go-kart Tonykart menggunakan Finite Element Method. Jurnal Teknik ITS, 8(1), E94-E99.
Fadillah, R., Zakki, A. F., & Kiryanto, K. (2020). Analisa Fatigue Pada Kapal Tanker 6500 DWT Berdasarkan Common Structural Rules (CSR) berbasis Finite Element Analysis (FEA). Jurnal Teknik Perkapalan, 8(4), 588-599.
Johnson, R. (2016). Scientific Equipment & Furniture Association Recommended Practices SEFA 8M. (Ed. 5). SEFA World Headquarters 65 Hilton Avenue, Garden City, NY.
Pris, F. R., Suyitno, B. M., & Suhadi, A. (2019). Analisis Kekuatan Velg Aluminium Alloy 17 Inc dari Berbagai Desain Menggunakan Metode Finite Element Analysis (FEA). Teknobiz: Jurnal Ilmiah Program Studi Magister Teknik Mesin, 9(2), 33-39.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Quantum Teknika : Jurnal Teknik Mesin Terapan
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright
The Authors submitting a manuscript do so on the understanding that if accepted for publication, the copyright of the article shall be assigned to Quantum Teknika : Jurnal Teknik Mesin Terapan as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations.
Authors should sign Copyright Transfer Agreement when they have approved the final proofs sent by Quantum Teknika : Jurnal Teknik Mesin Terapan prior to the publication. Quantum Teknika : Jurnal Teknik Mesin Terapan strive to ensure that no errors occur in the articles that have been published, both data errors and statements in the article.
Quantum Teknika : Jurnal Teknik Mesin Terapan keep the rights to articles that have been published. Authors are permitted to disseminate published articles by sharing the link to Quantum Teknika : Jurnal Teknik Mesin Terapan website. Authors are allowed to use their works for any purposes deemed necessary without written permission from Quantum Teknika : Jurnal Teknik Mesin Terapan with an acknowledgment of initial publication in this journal.
License
All articles published in Quantum Teknika : Jurnal Teknik Mesin Terapan are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC-BY-NC). You are free to :
1. Share – copy and redistribute the material in any medium or format.
2. Adapt – remix, transform, and build upon the material.
The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:
1. Attribution - you must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
2. NonCommercial - You may not use the material for commercial purposes.
3. No additional restrictions - You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
