Desain, Manufaktur dan Uji Kinerja Mesin Pengolah Serbuk Jahe Merah

Mirza Yusuf, Ferriawan Yudhanto, Dimas Pulung Purbajati

Abstract


Design of the red ginger powder production machine aims to increase UMKM
(Usaha Mikro Kecil dan Menengah) in the Yogyakarta area. By making a semiautomatic red ginger powder machine, it can increase production capacity and improve the economy for UMKM. Component design is divided into 3 processes, namely; designing the frame, designing the stirring shaft, and designing the cooking tank. There are first adjusted to the design that has been made using the solid works software which is then applied by assembling other components. The drive system on the powdered red ginger production machine uses an AC electric motor which is then forwarded into the v-belt transmission then the output from the transmission is forwarded to the stirring shaft.


Keywords


UMKM, Design, Solidwork, Drive System

Full Text:

PDF

References


Bureau of Energy Efficiency, 2004. Energy Efficiency in Electrical Utilities.

Efendi, A., Nugroho, Y.S. and Fahmi, M., 2020. Perancangan Rangka dan Analisis Beban Mobil Listrik Sula Menggunakan Software Autodeks Inventor. Jurnal E- Komtek (Elektro-Komputer-Teknik), 4(1), pp.100-114.

Etwin Fibrianie, S., Cahyadi, D. and Hidayanto, A.F. 2018, Rancang Bangun Mesin Penggiling Dan Potong Kerupuk Ikan Dengan Menggunakan Gearbox. Journal Teknologi Industri, 12(1), 1–8.

Fatchurrochman, M. and Sydore, F.R., 2018. Mesin Kristalisasi Serbuk Untuk Ukm Jamu Varagus Di Kecamatan Pegandon Kendal. Rekayasa: Jurnal Penerapan Teknologi dan Pembelajaran, 15(2), pp.82-88.

Febriyanto, D. dan Budijono, A.P., 2015. Rancang Bangun Mesin Pengaduk Petis Semi Otomatis. Journal of Education Technology Students, 2(03).

Hariyanto, S.D., Papasi, R.G., Munthohani, G.R., Lanekri, I.T. and Sastika, I.P., 2020. Perancangan dan Fabrikasi Mesin Pengolah Ubi Kayu untuk Produksi Makanan Ringan Lanting Kapasitas 40 kg/jam. Quantum Teknika: Jurnal Teknik Mesin Terapan, 2(1), pp.38-46.

Mustofa, M. and Botutihe, S., 2019. Rancang Bangun Dan Pengujian Alat Pengaduk Dodol. Jurnal Teknologi Pertanian Gorontalo (JTPG), 4(1), pp.26-33.

Samhuddin, S., Hasbi, M. and Jamiluddin, J., Perencanaan Sistem Transmisi Alat Peniris Pada Mesin Pengering Helm. ENTHALPY, 3(1).

Setyaningrum, R. and Lestari, K.P., 2020. Rancang Bangun Alat Produksi” Bandrek” Untuk Mengoptimalkan Proses Kristalisasi Dan Meminimalkan Residu Produk. Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer, 11(1), pp.51- 54.

Yudha, V. and Nugroho, N., 2020. Rancang Bangun Mesin Perajang Singkong dengan Pendorong Pegas. Quantum Teknika: Jurnal Teknik Mesin Terapan, 2(1), pp.20-26.

Yulianto, M.E., Handayani, D., Puspitarini, A.S., Nugraheni, F.S. and Yanti, N.R., 2018. Pembuatan Serbuk Jahe Instan Dengan Metode Kristalisasi Guna Meningkatkan Perekonomian Warga RW. 05 Kelurahan Tembalang, Semarang. SNKPPM, 1(1), pp.44-46.




DOI: https://doi.org/10.18196/jqt.v2i2.11573

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Quantum Teknika : Jurnal Teknik Mesin Terapan

License URL: https://creativecommons.org/licenses/by-nc/4.0/

Quantum Teknika : Jurnal Teknik Mesin Terapan is indexed by :

 

Office:

Editorial of Quantum Teknika, Building D, Jl. Brawijaya, Tamantirto, Kasihan, Bantul, Yogyakarta.

Telp: (0274) 387656
Fax: (0274) 387646
WA: +62896-7470-8638 (Mirza Yusuf)
Email: jqt@umy.ac.id

Creative Commons License
Quantum Teknika : Jurnal Teknik Mesin Terapan is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.