Karakterisasi Bahan Kampas Rem Sepeda Motor Dari Komposit Serbuk Kayu Jati

Ferriawan Yudhanto, Santo Ajie Dhewanto, Suluh Widya Yakti

Abstract


Commonly the prime material for brake pad of the commercial motorcycle using asbestos, these materials cause a disease like as cancer of respiration if the abrasive particles were sniffed. The SKJ (Serbuk Kayu Jati) brake pad is alternative to replacement the asbestos brake pads. The mechanical test includes a wear test, hardeness test, friction coefficient test, and heat resistant test. The hot press process for SKJ as main material of brake pad based by variation of temperature there are 160ºC, 170ºC, and 180ºC. The optimum test result of SKJ brake pads is a variation of 180ºC with wear test result is 3,36 x 10-7 mm2/kg, the hardeness result is 25,1 BHN, the friction coefficient test is 0,59 and not damaged on the heat resistant test with a temperature of 300ºC during an hour.


Keywords


SKJ (Serbuk Kayu Jati), Brake Pads, Mechanical Test, Hot Press

Full Text:

PDF

References


Choirudin. 2010, Pengaruh Variasi Komposisi Serat Serabut Kelapa, Plastik PET, Serbuk Alumunium Pada Sifat Fisik dan Koefisien Gesek Bahan Kampas Rem Gesek. (Tugas Akhir, Universitas Muhamadiyah Surakarta

Fitrianto, F.D., Estriyanto, Y. and Harjanto, B., 2013, Pemanfaatan Serbuk Tongkol Jagung Sebagai Alternatif Bahan Friksi Kampas Rem Non-Asbestos Sepeda Motor. Nosel, 1(3), pp.1-11.

Gopal, P., Dharani, L., & Blum, F. D. 1994, Fade and wear Characteristic of a glass-fibre-reinforced phenolic friction material. wear, 119-127

Maloney, T.M., 1977, Modern particleboard and dry-process fiberboard manufacturing.

PKKI. 1979, Kelas Kuat Ketahanan Kayu. Indonesia: Peraturan Konstruksi Kayu Indonesia

Priyono, J., & Suharno. (2014). Penerapan Metode Tracking pada Pengukuran Koefisien Gesek Kinetik Luncuran. Prociding Pertemuan Ilmiah XXVIII HFI Jateng & DIY, (hal. 50-53). Yogyakarta

Santoso, S., 2013. Studi Pemanfaatan Campuran Serbuk Tempurung Kelapa-Aluminium Sebagai Material Alternatif Kampas Rem Sepeda Motor Non-Asbestos. Jurnal Nosel, 2(1).

Sumaryono, A., Hadikusumo, S. A., & Lukmandaru, G. (2013). Pengawetan kayu gubal jati secara rendaman dingin dengan pengawet boron untuk mencegah serangan rayap kayu kering. Jurnal Ilmu Kehutanan, 93-107

Siregar, S. H., Hartono, R., Sucipto, T., & Iswanto, A. H. (2014). The variation of Temperature and Pressing Time on Particle Board Quality from Waste Oil Palm Trunk Using Phenol Formaldehyde Adhesive. PERONEMA FORESTRY SCIENCE JOURNAL

Setiawan, B., 2014, Pengaruh Suhu Sintering Pada Pembuatan Kampas Rem Dengan Resin Serbuk Sebagai Pengikat. (Tugas Akhir, Universitas Muhammadiyah Surakarta).

Szeri, A. Z. 1980, Tribology : Friction, Lubrication, and wear. Hemisphere: Hemisphere Publishing Corporation

Wahyudi, I., priadi, T., & rahayu, i. s. 2014, Karakteristik dan Sifat-Sifat Dasar Kayu Jati Unggul Umur 4 dan 5 Tahun Asal Jawa Barat. Jurnal Ilmu Pertanian Indonesia (JIPI), 50-56




DOI: https://doi.org/10.18196/jqt.010104

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Quantum Teknika : Jurnal Teknik Mesin Terapan

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Quantum Teknika : Jurnal Teknik Mesin Terapan is indexed by :

 

Office:

Editorial of Quantum Teknika, Building D, Jl. Brawijaya, Tamantirto, Kasihan, Bantul, Yogyakarta.

Telp: (0274) 387656
Fax: (0274) 387646
WA: +62896-7470-8638 (Mirza Yusuf)
Email: jqt@umy.ac.id

Creative Commons License
Quantum Teknika : Jurnal Teknik Mesin Terapan is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.