Perbaikan Teknik Relining Tanur Induksi Untuk Mencegah Terbentuknya Rongga Lining dan Penghematan Biaya Proses Peleburan

Anto Tridaryanto, Sutoyo Sutoyo, Mansur Hidayat

Abstract


The lining is coil’s protector componen and metal liquid reservoir, the lining is required to own endurance towards chemical reaction and high temperature emitted by the smelting process. The lining commonly problem on the lining damage (cavity) after the sintering process. This damage cause the smelting process force-stopped, due to endangering the induction furnace operator and the surrounding. According to the analysis result, the lining damage occured because of the improper pulverization and sintering process with the casting term. The uncontinued comprssion process and the improper sintering with the used fireproof material, cause the lining can not maximally functioned. The upcoming refinement will apply proper compression process according to metal casting theories and economically anallyzed.


Keywords


Lining, Sintering, Induction, Furnace

Full Text:

PDF

References


ASM Handbook (1992), Casting, Volume 15, ASM International.

Cardarelli, F., (2008), Materials Handbook Second Edition, Springer, London

Gandhewar et. al (2011), Induction Furnace - A Review, International Journal of Engineering and Technology, Vol.3 (4), 2011, 277-284

Ghosh, A (2000), Secondary Steelmaking: Principles and Applications, CRC Press, 2000

Nugroho, Sri dan Yusuf Umardhani, 2011, Karakteristik Material Refraktori Basa Berbahan Dasar Magnesia (MgO) Guna Lining Tungku Induksi Pengecoran Baja di PT X Klaten, Unwahas

Surdia, T., dan Chijiiwa, K., 1986, Teknik Pengecoran Logam, Pradnya Paramita, Jakarta

www.hapli.wordpress.com, Peleburan Dengan Tanur Induksi, Lining Tanur Induksi.

https://logamceper.com/teknik-pembuatan-cetakan-secara-manual/




DOI: https://doi.org/10.18196/jqt.010211

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Quantum Teknika : Jurnal Teknik Mesin Terapan

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Quantum Teknika : Jurnal Teknik Mesin Terapan is indexed by :

 

Office:

Editorial of Quantum Teknika, Building D, Jl. Brawijaya, Tamantirto, Kasihan, Bantul, Yogyakarta.

Telp: (0274) 387656
Fax: (0274) 387646
WA: +62896-7470-8638 (Mirza Yusuf)
Email: jqt@umy.ac.id

Creative Commons License
Quantum Teknika : Jurnal Teknik Mesin Terapan is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.