Properties of Concrete Containing Type-C Fly Ash Under Elevated Temperature

Ni Nyoman Kencanawati, Suryawan Murtiadi, Lina Sabrina Qomari, Ahmad Zaki

Abstract


High temperatures affect the properties of the concrete material. The changes generally depend on the quality of the concrete and the content of added ingredients during concrete mixing. This article examines the strength, weight, and visual changes of normal and high-strength concrete with the addition of class C fly ash (FA) under elevated temperature. FA was added as much as 15% by cement weight in each concrete type. The specimens consisted of four types concrete: normal concrete, normal concrete + FA, high-strength concrete, and high-strength concrete + FA. The fire test was carried out after 45 days curing time for 3 hours with variations in combustion temperature of 500ºC and 1000ºC. Visually, the concrete changes color to yellow-white with micro-cracks after being exposed to a temperature of 500ºC, while at 1000ºC, the surfaces of the concrete turns white, and there are larger and more apparent cracks. Furthermore, adding class C FA to high-strength concrete does affect the fire resistance level because it showed almost the same residual compressive strength after exposure to both elevated temperature of 500°C and 1000°C.

Keywords


Type C fly ash; concrete; elevated temperature; residual strength

Full Text:

PDF

References


Ashtiani, M. S., Scott, A. N., & Dhakal, R. P. (2013). Mechanical and fresh properties of high-strength self-compacting concrete containing class C fly ash. Construction and Building Materials, 47, 1217-1224. https://doi.org/10.1016/j.conbuildmat.2013.06.015

Bayuasri, T. (2006). Changes in the mechanical behavior of concrete due to high temperatures, (Doctoral dissertation, Magister of Civil Engineering).

Kencanawati, N. N., Murtiadi, S., & Nur, Z. A. (2021). Investigation of polypropylene fiber reinforced concrete after elevated temperature using color quantification and alkalinity method. In International Conference on Rehabilitation and Maintenance in Civil Engineering (pp. 1153-1163). Singapore: Springer Nature Singapore.

Kencanawati, N. N., Mahmud, F., Merdana, I. N., & Ngudiyono, N. (2015). Deteksi penurunan kadar kebasaan beton pasca bakar sebagai estimasi awal terjadinya korosi pada baja tulangan: Alkaline onset detection of concrete after fire as a preliminary estimation of steel reinforcement corrosion. Spektrum Sipil, 2(1), 22-27. https://spektrum.unram.ac.id/index.php/Spektrum/article/view/38

Khoury, G. A. (2008). Polypropylene fibres in heated concrete. Part 2: Pressure relief mechanisms and modelling criteria. Magazine of Concrete Research, 60(3), 189-204. https://doi.org/10.1680/macr.2007.00042

Klima, K. M., Schollbach, K., Brouwers, H. J. H., & Yu, Q. (2022). Thermal and fire resistance of Class F fly ash based geopolymers–A review. Construction and Building Materials, 323, 126529. https://doi.org/10.1016/j.conbuildmat.2022.126529

Memon, S. A., Shah, S. F. A., Khushnood, R. A., & Baloch, W. L. (2019). Durability of sustainable concrete subjected to elevated temperature–A review. Construction and Building Materials, 199, 435-455. https://doi.org/10.1016/j.conbuildmat.2018.12.040

Pathurahman, P., Hariyadi, H., & Kencanawati, N. N. (2021). Study on the utilization of fly ash-bottom ash (FABA) at PLTU Jeranjang, West Nusa Tenggara. Final Report. Engineering Faculty. Mataram University.

Phan, L. T. (1996). Fire performance of high-strength concrete: A report of the state-of-the-art (Vol. 105). Gaithersburg, MD: National Institute of Standards and Technology.

Saha, A. K. (2018). Effect of class F fly ash on the durability properties of concrete. Sustainable Environment Research, 28(1), 25-31. https://doi.org/10.1016/j.serj.2017.09.001

Siddique, R. (2004). Performance characteristics of high-volume Class F fly ash concrete. Cement and Concrete Research, 34(3), 487-493. https://doi.org/10.1016/j.cemconres.2003.09.002

SNI 1741-2008. (2008). Method for Testing of Fire Resistance of Building Structure Components for Prevention of Fire Hazards in Houses and Buildings. Indonesian National Standardization Agency. Jakarta.

Srihayati, B. V., Murtiadi, S., & Kencanawati, N. N. (2021). Pengaruh temperatur terhadap kuat tekan beton mutu tinggi dengan penambahan silica fume sebagai pengganti sebagian semen. Sigma: Jurnal Teknik Sipil, 1(1), 37-45. https://journal.ummat.ac.id/index.php/sigma/article/view/4410

Xu, G., & Shi, X. (2018). Characteristics and applications of fly ash as a sustainable construction material: A state-of-the-art review. Resources, Conservation and Recycling, 136, 95-109. https://doi.org/10.1016/j.resconrec.2018.04.010

Yildirim, H., Sümer, M., Akyüncü, V., & Gürbüz, E. (2011). Comparison on efficiency factors of F and C types of fly ashes. Construction and Building Materials, 25(6), 2939-2947. https://doi.org/10.1016/j.conbuildmat.2010.12.009

Yu, J., Yu, K., & Lu, Z. (2012). Residual fracture properties of concrete subjected to elevated temperatures. Materials and Structures, 45, 1155-1165. https://doi.org/10.1617/s11527-012-9823-4

Zhang, B. (2011). Effects of moisture evaporation (weight loss) on fracture properties of high performance concrete subjected to high temperatures. Fire Safety Journal, 46(8), 543-549. https://doi.org/10.1016/j.firesaf.2011.07.010




DOI: https://doi.org/10.18196/st.v26i2.19732

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Ni Nyoman Kencanawati, Suryawan Murtiadi, Lina Sabrina Qomari, Ahmad Zaki

Editorial Office :

SEMESTA TEKNIKA

Faculty of Engineering, Universitas Muhammadiyah Yogyakarta.

Jln. Brawijaya Tamantirto Kasihan Bantul 55183 Indonesia

Telp:(62)274-387656, Fax.:(62)274-387656

Email: semesta_teknika@umy.ac.id, semestateknika@umy.university

Website: http://http://journal.umy.ac.id/index.php/st

Creative Commons License

Semesta Teknika is licensed under a Creative Commons Attribution 4.0 International License.