Pengaruh Penambahan Pecahan Kaca Sebagai Bahan Pengganti Agregat Halus dan Penambahan Fiber Optik Terhadap Kuat Tekan Beton Serat

Authors

  • Muhammad Nur Ikhsan Universitas Muhammadiyah Yogyakarta
  • Hakas Prayuda Universitas Muhammadiyah Yogyakarta
  • Fadillawaty Saleh Universitas Muhammadiyah Yogyakarta

DOI:

https://doi.org/10.18196/st.v19i2.2037

Keywords:

Fibre Concrete, Crushed Glass, Optic Fibre, Compressive Strength

Abstract

Fibre concrete is an innovation of normal concrete to special concrete to be stronger withstands the tensile force. Fibre concrete consists of cement, water, fine aggregate, coarse aggregate and additional fibre materials. The addition of fibre is expected to reduce the segragation and prevent cracks of the concrete. In this research used additional glass fracture with variation of 15%, 20%, 25% to the weight of the fine aggregate as well as additional of optic fibre of 0,15% of the concrete’s weight. Their compressive strength was examined at the age of 28 days. The result is gained by adding 15% of glass fracture 24,94 MPa with modulus of elasticity 23471,8 MPa, addition of 20% gained the result of compressive strength by 25,48 MPa with modulus of elasticity 23724,5 MPa, meanwhile by adding glass fracture 25% gained the result of compressive strength 25,77 MPa with modulus of elasticity 23859,2 Mpa.

References

Fikkriansyah & Tanzil, G., 2013. Pengaruh Sulfat Terhadap Kuat Tekan Beton dengan Variasi Bubuk Kaca Substitusi Sebagian Semen dengan w/c 0,60 dan 0,65". Teknik Sipil dan Lingkungan, 1(1).

Gunawan, P. dkk., 2014. "Pengaruh Penambahan Serat Nylon Pada Beton Ringan Dengan Teknologi Foam Terhadap Kuat Tekan , Kuat Tarik Belah dan Modulus Elastisitas". e-Jurnal Matriks Teknik Sipil, (September), pp.289–296.

Gurning, N., 2013. "Pembuatan Beton Serat Tandan Kosong Kelapa Sawit". TELAAH Jurnal Ilmu Pengetahuan dan Teknologi, 31(April), pp.13–20.

Karwur, H.Y. dkk., 2013. "Kuat tekan beton dengan bahan tambah serbuk kaca sebagai substitusi parsial semen". Jurnal Sipil Statik, 1(4).

Kosim & Hasan, A., 2014. "Pemanfaatan Serbuk Kaca Sebagai Bahan Tambah Agregat Halus Untuk Meningkatkan Kuat Tekan Beton". Jurnal Teknik Sipil, 10(2), pp.170–178.

Mulyono, T., 2003, Teknologi Beton, Andi, Yogyakarta.

SNI-1972:2008, 2008, Cara Uji Slump Beton, Badan Standardisasi Nasional, Jakarta.

Tjokrodimuljo, K., 2007, Teknologi Beton, KMTS FT UGM, Yogyakarta.

Downloads

Published

2016-11-30

How to Cite

Ikhsan, M. N., Prayuda, H., & Saleh, F. (2016). Pengaruh Penambahan Pecahan Kaca Sebagai Bahan Pengganti Agregat Halus dan Penambahan Fiber Optik Terhadap Kuat Tekan Beton Serat. Semesta Teknika, 19(2), 148–156. https://doi.org/10.18196/st.v19i2.2037

Issue

Vol. 19 No. 2 (2016): NOVEMBER 2016

Section

Articles

License


Semesta Teknika is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).