Recycled PET Plastics Filament: Characteristic and Cost Opportunity
Abstract
Piyungan Integrated Waste Disposal Site (TPST) is a waste disposal site in Yogyakarta province. With an estimated increase in the amount of waste of 8% per year, it is estimated that the TPST will not be able to accommodate waste from the community. One of these wastes is PET bottle. This research aims to develop a new recycling method by converting PET plastic waste into 3D Printer machine filament and investigate the opportunity of this PET filament. This research uses several stage methods: PET filament making, Tensile test, macroscopy photography and opportunity analysis. This study concludes that PET bottle waste can be used as 3D printer filament with a diameter of 1.7 mm. Processing PET bottle waste into 3D printer machine filament can increase the economic value of PET bottle waste. And this can contribute to the potential for processing plastic bottle waste.
Keywords
Full Text:
PDFReferences
Amiruddin, M., Harjanto, I., Setyoadi, Y., & Carsoni. (2015). Perancangan Dan Manufaktur Printer 3 Dimensi Tipe Fused DeposFition Modeling (Fdm). Seminarnasionalhasilpenelitian(Snhp‐V), November, 547–551.
Bardoquillo, E. I. M., Firman, J. M. B., Montecastro, D. B., & Basilio, A. M. (2023). Chemical recycling of waste polyethylene terephthalate (PET) bottles via recovery and polymerization of terephthalic acid (TPA) and ethylene glycol (EG). Materials Today: Proceedings, xxxx. https://doi.org/10.1016/j.matpr.2023.04.160
Bozkurt, Y., & Karayel, E. (2021). 3D printing technology; methods, biomedical applications, future opportunities and trends. Journal of Materials Research and Technology, 14, 1430–1450. https://doi.org/10.1016/j.jmrt.2021.07.050
Brivio, L., Meini, S., Sponchioni, M., & Moscatelli, D. (2024). Chemical recycling of polyethylene terephthalate (PET) to monomers: Mathematical modeling of the transesterification reaction of bis(2-hydroxyethyl) terephthalate to dimethyl terephthalate. Chemical Engineering Science, 284(November 2023). https://doi.org/10.1016/j.ces.2023.119466
Colón, J., Martínez-Blanco, J., Gabarrell, X., Artola, A., Sánchez, A., Rieradevall, J., & Font, X. (2010). Environmental assessment of home composting. Resources, Conservation and Recycling, 54(11), 893–904. https://doi.org/10.1016/j.resconrec.2010.01.008
Dyaksa, G. A., Arfian, N. U. R., & Choridah, L. (2021). DEVELOPMENT OF CRANIUM 3DIMENSION-PUZZLE PRODUCTS USING 3D PRINTING. 1, 23–30.
Farah, S., Anderson, D. G., & Langer, R. (2016). Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review. Advanced Drug Delivery Reviews, 107, 367–392. https://doi.org/10.1016/j.addr.2016.06.012
Fico, D., Rizzo, D., De Carolis, V., Montagna, F., Palumbo, E., & Corcione, C. E. (2022). Development and characterization of sustainable PLA/Olive wood waste composites for rehabilitation applications using Fused Filament Fabrication (FFF). Journal of Building Engineering, 56(May), 104673. https://doi.org/10.1016/j.jobe.2022.104673
Hwang, J. K. (2019). Effects of diameter and preparation of round shaped tensile specimen on mechanical properties. Materials Science and Engineering: A, 763(May), 138119. https://doi.org/10.1016/j.msea.2019.138119
Kementerian Riset Teknologi dan Pendidikan Tinggi. (2017). RENCANA INDUK RISET NASIONAL TAHUN 2017-2045. 28. https://doi.org/10.1201/9781482277098-12
Khan, A., Sapuan, S. M., Yusuf, J., Siddiqui, V. U., Zainudin, E. S., Zuhri, M. Y. M., Tuah Baharuddin, B. T. H., Ansari, M. A., & Rahman, A. A. A. (2023). An examination of cutting-edge developments in Bamboo-PLA composite research: A comprehensive review. Renewable and Sustainable Energy Reviews, 188(June), 113832. https://doi.org/10.1016/j.rser.2023.113832
Lohar, D. V., Nikalje, A. M., & Damle, P. G. (2023). Synthesis and characterization of PLA hybrid composites using bio waste fillers. Materials Today: Proceedings, 72, 2155–2162. https://doi.org/10.1016/j.matpr.2022.08.276
Mi, X., Li, W., Xu, H., Mu, B., Chang, Y., & Yang, Y. (2020). Transferring feather wastes to ductile keratin filaments towards a sustainable poultry industry. Waste Management, 115, 65–73. https://doi.org/10.1016/j.wasman.2020.07.022
Nisticò, R. (2020). Polyethylene terephthalate (PET) in the packaging industry. Polymer Testing, 90(June). https://doi.org/10.1016/j.polymertesting.2020.106707
Palaniyappan, S., & Sivakumar, N. kumar. (2023). Development of crab shell particle reinforced polylactic acid filaments for 3D printing application. Materials Letters, 341(March), 134257. https://doi.org/10.1016/j.matlet.2023.134257
Pamasaria, H. A., Saputra, T. H., Hutama, A. S., & Budiyantoro, C. (2020). Optimasi Keakuratan Dimensi Produk Cetak 3D Printing berbahan Plastik PP Daur Ulang dengan Menggunakan Metode Taguchi. JMPM (Jurnal Material Dan Proses Manufaktur), 4(1), 12–19. https://doi.org/10.18196/jmpm.4148
Pintos, P. B., León, A. S. De, & Molina, I. (2023). u rn a l P re. Additive Manufacturing, 103908. https://doi.org/10.1016/j.addma.2023.103908
Putra, I. R., & Tontowi, A. E. (2019). Properti Mekanik Material [ Sagu / PMMA ] “ 3D -Printable .” Seminar Nasional Inovasi Dan Aplikasi Teknologi Di Industri, 320–323.
Rosid, I. A., Putra, I. R., & Tontowi, A. E. (2019). Mechanical Properties Of Tensile And Bending Strength Analysis In Biocomposite [SAGOO/PMMA] Material. Conference SENATIK STT Adisutjipto Yogyakarta, 5, 507–514. https://doi.org/10.28989/senatik.v5i0.371
Sarkar, S., Pal, S., & Chanda, S. (2016). Optimization of a Vegetable Waste Composting Process with a Significant Thermophilic Phase. Procedia Environmental Sciences, 35, 435–440. https://doi.org/10.1016/j.proenv.2016.07.026
Sudibyo, H., Majid, A. I., Pradana, Y. S., Budhijanto, W., Deendarlianto, & Budiman, A. (2017). Technological Evaluation of Municipal Solid Waste Management System in Indonesia. Energy Procedia, 105, 263–269. https://doi.org/10.1016/j.egypro.2017.03.312
Sudibyo, H., Pradana, Y. S., Budiman, A., & Budhijanto, W. (2017). Municipal Solid Waste Management in Indonesia - A Study about Selection of Proper Solid Waste Reduction Method in D.I. Yogyakarta Province. Energy Procedia, 143, 494–499. https://doi.org/10.1016/j.egypro.2017.12.716
Sumadi. (2022). Peraturan Daerah (PERDA) Nomor 1 Tahun 2022 tentang Perubahan atas Peraturan Daerah Kota Yogyakarta Nomor 10 Tahun 2012 Tentang Pengelolaan Sampah. 2(8.5.2017), 2003–2005.
Szulżyk-Cieplak, J., Duda, A., & Sidor, B. (2014). 3D Printers – New Possibilities in Education. Advances in Science and Technology Research Journal, 8(24), 96–101. https://doi.org/10.12913/22998624/575
Tadi, S. P., Maddula, S. S., & Mamilla, R. S. (2024). Sustainability aspects of composite filament fabrication for 3D printing applications. Renewable and Sustainable Energy Reviews, 189(PA), 113961. https://doi.org/10.1016/j.rser.2023.113961
Tontowi, A. E., Raharjo, K. P., Sihaloho, R. I., & Baroroh, D. K. (2017). Comparison of design method for making composite of (PMMA/HA/Sericin). Materials Science Forum, 901 MSF, 85–90. https://doi.org/10.4028/www.scientific.net/MSF.901.85
Umerah, C. O., Kodali, D., Head, S., Jeelani, S., & Rangari, V. K. (2020). Synthesis of carbon from waste coconutshell and their application as filler in bioplast polymer filaments for 3D printing. Composites Part B: Engineering, 202(September), 108428. https://doi.org/10.1016/j.compositesb.2020.108428
Wicaksono, R. A., Kurniawan, E., Syafrianto, M. K., Suratman, R. F., & Sofyandi, M. R. (2021). Rancang Bangun dan Simulasi 3D Printer Model Cartesian Berbasis Fused Deposition Modelling. Jurnal Engine: Energi, Manufaktur, Dan Material, 5(2), 53. https://doi.org/10.30588/jeemm.v5i2.895
DOI: https://doi.org/10.18196/st.v27i2.21072
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Ikbal Rizki Putra, Muhammad Luqman Bukhori, Angger Bagus Prasetiyo, Fadzkurisma Robbika, Brian Teo Putra
Editorial Office :
SEMESTA TEKNIKA
Faculty of Engineering, Universitas Muhammadiyah Yogyakarta.
Jln. Brawijaya Tamantirto Kasihan Bantul 55183 Indonesia
Telp:(62)274-387656, Fax.:(62)274-387656
Email: semesta_teknika@umy.ac.id, semestateknika@umy.university
Website: http://http://journal.umy.ac.id/index.php/st
Semesta Teknika is licensed under a Creative Commons Attribution 4.0 International License.