Pengaruh Variasi Bahan Tambah Abu Sekam Padi dan Zat Adiktif Bestmittel 0,5% Terhadap Kuat Tekan Beton Mutu Tinggi
DOI:
https://doi.org/10.18196/st.v20i2.3172Keywords:
Compressive strength, rice husk ash, bestmittel, concreteAbstract
Concrete is the mixture of portland cement or hidrolyc cement, fine aggregate, coarse aggregate and water with or without additional mixture to form solid mass. The use of cement makes the concrete price more expensive, so an innovation is needed which to be use natural additive, such as rice husk ash. This research was carried by decreasing the use of cement that was replaced by rice husk ash with the variation 5%, 10%, and 15%, and 0.5% additive material (bestmittel) of the cement. Cylinder samples with the diameter of 15 cm and heigth of 30 cm were tested at the age of 28 days. The result of this research shows that the compresssive strength of the concrete was affected by the additional of rice husk ash (RHA) and additive material (bestmittel), which decrease the compressive strength every additional rice husk ash. The use of rice husk ash and bestmittel on the concrete for 3 variation which were 5 % ; 10% ; and 15% with the additive (bestmittel) 0.5% obtained compressive strength were 32,23MPa; 31,84MPa and 27,71MPa.
References
Aprilianti dan Nadia 2012, Analisis Pengaruh Beton dengan Bahan Admixture Naphtalene dan Polycarboxilate Terhadap Kuat Tekan Beton Normal, Jurnal Konstruksi, Volume 3 Nomer 2, April 2012.
Departemen Pekerjaan Umum (1989), Metode Pengujian untuk Menentukan Slump Beton, SK. SNI M-12-1989-F, Yayasan LPMB, Bandung.
Departemen Pekerjaan Umum (1990), Pernyaratan Mutu Abu Terbang Sebagai Bahan Tambahan Dalam Campuran Beton, SK. SNI S-15-1990-F, Yayasan LPMB, Bandung
Departemen Pekerjaan umum (1991). Abu Terbang Sebagai Bahan Tambah Campuran Beton Spesifikasi, SK SNI 03-2460-1991, Jakarta: Yayasan Badan Penerbit Pekerjaan Umum.
Departemen Pekerjaan Umum (2000). Tata Cara Perencanaan Campuran Beton Berkekuatan Tinggi Dengan Semen Portland dan Abu Terbang, SNI 03-6468-2000. Badan Standar Nasional.
Departemen Pekerjaan Umum (2002). Tata Cara Perencanaan Struktur Beton Untuk Bangunan Gedung, SNI-03-2847-2002, Badan Standarnisasi Nasional.
Departemen Pekerjaan Umum, (1990), Tata Cara Rencana Campuran Beton Normal, SK SNI T-15-1990-03, Yayasan LPMB, Bandung.
Departemen Permukiman dan Prasarana Wilayah, (2004). Tata Cara Pembuatan dan Pelaksanaan Beton Berkekuatan Tinggi, (PD T-04-2004-C), Departemen Pekerjaan Umum.
Mulyono, 2004, Teknologi Beton, Fakultas Teknik UGM, Yogyakarta
Pujianto, As’at, 2010, Beton Mutu Tinggi dengan Bahan Tambah
Superplasticizer dan Fly Ash, Jurnal Ilmiah Semesta Teknika UMY, Vol. 13, No. 2, pp 171-180
Raharja dkk. Jurnal, 2013, Pengaruh Penggunaan Abu Sekam Padi Sebagai Bahan Pengganti Sebagian Semen Terhadap Kuat Tekan dan Modulus Elastisitas Beton Kinerja Tinggi, e-Jurnal Matriks Teknik Sipil, Vol. 1 No. 4/Desember 2013/503.
Suhirkam dan Dafrimon, 2014, Beton Mutu K-400 Dengan Penambahan Abu Sekam Padi dan Superplastisizer, Jurnal Teknik Sipil, Volume 10, No. 1, Maret 2014.
Sukirman, Silvia, 2003. Beton Aspal Campuran Panas ISBN 979-461-472-6. Edisi 1, Jakarta : Granit 2003.
Tjokrodimuljo, 2010, Teknologi Beton, Penerbit KMTS FT UGM, Jogjakarta.
Downloads
Published
How to Cite
Issue
Section
License
Semesta Teknika is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).