Pengaruh Jumlah Lapisan dan Spasi Perkuatan Geosintetik terhadap Kuat Dukung dan Penurunan Tanah Lempung Lunak
DOI:
https://doi.org/10.18196/st.v15i1.447Abstract
One of the ways to improve the mechanical characteristics of soft soil is to provide soil reinforcement which is a geosynthetic sheet overlaid on the soft soil. Previous studies show that the installation of geosynthetic layers in soft soil proved to increase the bearing capacity and reduce the settlement. Theoretically, if more layers of reinforcement are given, the support will be stronger, while the soil of settlement will be reduced even greater. In this study, the influence of the number of layers and vertical distance between geosynthetic layers on the magnitude of bearing capacity, and the settlement in base soil will be assessed. The primary research is a load test on each clay included in model boxes of 120 cm x 120 cm x 100 cm size. Water was added to the soil to achieve the liquid limit conditions, then the soil was strengthened by inserting 60 x 60cm2 HRX200 woven geotextile layers whose tensile strength is 20 kN/m2 with various distances and number of layers among different boxes. The bottom of loading foundation on the top side of the samples is square whose side (B) is of 10 cm. The loading process were done until the soil collapse indicated by visual observation or by the condition of no increase of the load magnitude causing settlement. The results showed that 1 layer, 2 layers and 3 layers geosynthetic correspond to the bearing capacity increase of 60.57%, 213.00% and 402.64%, respectively, and experienced a reduction in soil settlement by 40%, 60% and 70%, respectively, compared to that without any reinforcement. Geosynthetic being placed at a distance of 0.4 B and 0.6 B gives the greatest bearing capacity increase, in the amount of 402.64%. Geosynthetic mounted on distance more than 0.6 B resulted in bearing capacity increase of diminishing percentages.
Downloads
Published
How to Cite
Issue
Section
License
Semesta Teknika is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).