Pengaruh Penambahan Plastik High Density Polyetilene (HDPE) dalam Campuran Hot Rolled Sheet Wearing Course (HRS-WC) terhadap Parameter Marshall, Kuat Tekan dan Kuat Tarik Belah

Authors

  • Pepi Nega Akmus Universitas Muhammadiyah Yogyakarta

DOI:

https://doi.org/10.18196/st.v16i2.4895

Keywords:

HDPE, Marshall test, tensile strength, compression strength.

Abstract

In this study, plastics High-Density Polyethylene (HDPE) were used as an additional ingredient of asphalt for HRS-WC mixtures by using a variation of the plastic content of 0%, 2%, 4%, 6% to the asphalt weight. Bitumen content obtained from the optimum bitumen content of 7.5%. The purpose of this research is to examine and to compare the Marshall characteristics, compressive strength and split tensile of HRS-WC mixture. The results showed that the addition of HDPE plastic provide a significant influence on the marshall characteristic, split tensile strength and compressive strength. Asphalt stability with the addition of HDPE by 2%, 4% and 6% compliant with the specifications of marshall stability results respectively amounted to 2589.40 kg, 2257.13 kg and 2385.16 kg.

References

Anonim (1989). SNI 03-1737-1989, Tata Cara Pelaksanaan Lapis Aspal Beton Untuk Jalan Raya, Pusjatan-Balitbang PU.

Anonim (2002). SNI 03-2491-2002, Metode Pengujian Kuat Tarik Belah Beton, Pustran-Balitbang PU.

Anonim (2010). Spesifikasi Umum 2010 (revisi 2), Kementerian Pekerjaan Umum, Direktorat Jenderal Bina Marga.

Downloads

Published

2018-08-28

How to Cite

Akmus, P. N. (2018). Pengaruh Penambahan Plastik High Density Polyetilene (HDPE) dalam Campuran Hot Rolled Sheet Wearing Course (HRS-WC) terhadap Parameter Marshall, Kuat Tekan dan Kuat Tarik Belah. Semesta Teknika, 16(2), 117–123. https://doi.org/10.18196/st.v16i2.4895

Issue

Vol. 16 No. 2 (2013): NOVEMBER 2013

Section

Articles

License


Semesta Teknika is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).