Aplikasi Value Engineering dengan Metode“Paired Comparison” pada Struktur Pelat Beton

Authors

  • Budi Sutrisno Universitas Muhammadiyah Yogyakarta
  • Mandiyo Priyo Universitas Muhammadiyah Yogyakarta

DOI:

https://doi.org/10.18196/st.v16i2.4910

Keywords:

Value Engineering, Concrete Plate, Paired Comparison

Abstract

This research studied the application of value engineering with a paired comparison method with the case study in Tourism Building of Sleman Regency, Special Region of Yogyakarta. Several steps need to be carried out which consisted of information, creativity, a paired comparison method analysis, development and recommendation for the new design of a concrete plate. The concrete plate was redesigned using 2 alternatives. The first alternative was reducing the thickness of the plate from 12 cm to 10 cm without changing the concrete quality. The second alternative was using precast concrete. The result shows that the first alternative will save project budget to Rp. 10,569,562.-. Moreover, by using precast, the budget for the project will be increased by Rp.4,208,058.-. According to the paired comparison method and alternative comparison evaluation matrix, the second alternative has the highest percentage (59%), while first alternative and current condition only have 25% and 16% respectively. The second alternative was chosen to be applied to replace the existing design since it will gain more profit than any other which were included concrete quality, time, controlling, weather and human resources.

References

Barrie, D. dan Poulson, B. (1984). Manajemen
Konstruksi Profesional. Alih Bahasa
Sudinarto. 1990. Edisi Kedua. Jakarta :
Erlangga.

Dell’Isola, A. (1974). Value Engineering in the
Construction Industry. New York:
Construction Publishing Corp., Inc.

Hutabarat, J. (1995). Rekayasa Nilai ( Value
Engineering ). Malang: Institut Teknologi
Nasional.

Ibrahim, B. (1994). Rencana dan Estimate Real
of Cost. Jakarta : Bumi Aksara.

Downloads

How to Cite

Sutrisno, B., & Priyo, M. (2018). Aplikasi Value Engineering dengan Metode“Paired Comparison” pada Struktur Pelat Beton. Semesta Teknika, 16(2), 172–178. https://doi.org/10.18196/st.v16i2.4910

Issue

Vol. 16 No. 2 (2013): NOVEMBER 2013

Section

Articles

License


Semesta Teknika is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).