Pemanfaatan Fly Ash dan Alkali Resistant Glass Fibre (ARG) dalam Pembuatan Paving Block
DOI:
https://doi.org/10.18196/st.v16i2.4919Keywords:
paving block, fly ash, alkali resistant glass fibreAbstract
The paving block is an alternative to the use of pavement layer that is safe, strong and easy to installation and maintenance. Pavement paving block also can be produced both mechanically and manually. The added fly ash was a waste material from coal combustion in the steam power plant furnace in the form of fine, round, pozzolanic and fibre-resistant. Alkali Resistant Glass Fibre (ARG) which is shaped like a rope 18-36 mm long was added into the paving block with mixed compositions 1 Pc:10 Ps that aims to strengthen the compressive strength and flexibility of the paving block. This research was used 15 samples with mixture variation of fly ash 19% and fiber 0,25%, 0,5%, 0,75% and 1%. Based on the results of laboratory analysis, paving block (1 Pc: 10 Ps) with the addition of fly ash 19% and ARG 0.6% yielding a maximum compressive strength of 18.35 MPa. The addition of fibres with fly ash mixture was also able to increase the compressive strength of the paving block.References
Adibroto, F., (2014). Pengaruh Penambahan
Berbagai Jenis Serat Pada Kuat Tekan
Paving Block, Jurnal Rekayasa Sipil,
10(1), pp. 1-11.
Badan Standarisasi Nasional (1990). SNI 03-
1974-1990, Metode pengujian kuat
tekan beton, Jakarta.
Badan Standarisasi Nasional (1996). SNI 03-
0691-1996, Bata Beton (Paving
Block), Jakarta.
Badan Standarisasi Nasional (2002). SNI 03-
6863-2002. Metode pengambilan
contoh dan pengujian abu terbang atau
pozolan alam sebagai mineral pencampur dalam beton semen
Portland.
Mulyati, Maliar, S., (2015). Penggaruh
Penggunaan Fly Ash Sebagai
Pengganti Agregat Terhadap Kuat
Tekan Paving Block, Jurnal
Momentum, 17(1), pp. 42-49.
Mulyono, T. (2007). Tegnologi Beton,
Andi,Yogyakarta.
Berbagai Jenis Serat Pada Kuat Tekan
Paving Block, Jurnal Rekayasa Sipil,
10(1), pp. 1-11.
Badan Standarisasi Nasional (1990). SNI 03-
1974-1990, Metode pengujian kuat
tekan beton, Jakarta.
Badan Standarisasi Nasional (1996). SNI 03-
0691-1996, Bata Beton (Paving
Block), Jakarta.
Badan Standarisasi Nasional (2002). SNI 03-
6863-2002. Metode pengambilan
contoh dan pengujian abu terbang atau
pozolan alam sebagai mineral pencampur dalam beton semen
Portland.
Mulyati, Maliar, S., (2015). Penggaruh
Penggunaan Fly Ash Sebagai
Pengganti Agregat Terhadap Kuat
Tekan Paving Block, Jurnal
Momentum, 17(1), pp. 42-49.
Mulyono, T. (2007). Tegnologi Beton,
Andi,Yogyakarta.
Downloads
How to Cite
Soebandono, B. (2018). Pemanfaatan Fly Ash dan Alkali Resistant Glass Fibre (ARG) dalam Pembuatan Paving Block. Semesta Teknika, 16(2), 179–183. https://doi.org/10.18196/st.v16i2.4919
Issue
Section
Articles
License
Semesta Teknika is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).