Rancang Bangun Model Turbin Pelton Mini Sebagai Media Simulasi/Praktikum Mata Kuliah Konversi Energi Dan Mekanika Fluida

Authors

  • Hadimi Hadimi Politeknik Negeri Pontianak
  • Supandi Supandi Politeknik Negeri Pontianak
  • Agus Rohermanto Politeknik Negeri Pontianak

DOI:

https://doi.org/10.18196/st.v9i1.877

Keywords:

Model, turbin pelton, bucket, runner, nozel, rpm dan tegangan listrik

Abstract

This Research is conducted in Pontianak state Polytechnic using test-drive method based on literature. The step are scheme/ turbine design, making and repairing in order to get a better pelton turbine. The main objective of this research is to provide facility for energy conversion and fluid mechanism practice which is limited in Mechanical Engineering Department so that it is hoped that it will contribute positive effects on students ability in that field. The construction and specification of pelton turbine model resulted of this research as follows; ( 1) Type Pump: Jet propulsion Pump, with the energy input 500 Watt, head pump 55 m, and debit 30 L / minute. ( 2) Generator energy 500 VA and Rpm 1500 rpm, 50 Hz. ( 3) Runner specification: The sum of buckets / sudu is 8 ( single and double), runner diameter 17 cm, out side diameter 44 cm, the width of bucket 6 cm, the length is 14 cm, and pitch pelton wheel diameter is 30 cm. ( 4) Nozzle diameter is 20 mm. The result of research on this pelton turbine model shows of water kinetic energy into electrical energy resulted by pelton turbine, and the bucket type design as well as the sum influence the rpm and voltage gained.

Downloads

How to Cite

Hadimi, H., Supandi, S., & Rohermanto, A. (2016). Rancang Bangun Model Turbin Pelton Mini Sebagai Media Simulasi/Praktikum Mata Kuliah Konversi Energi Dan Mekanika Fluida. Semesta Teknika, 9(1), 16–24. https://doi.org/10.18196/st.v9i1.877

Issue

Vol. 9 No. 1 (2006): MEI 2006

Section

Articles

License


Semesta Teknika is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).