Analisa Perbandingan Desain Panel Distribusi dengan Metode Computational Fluid Dynamics

Adhi Setya Hutama, Yohanes Hendra Kurniawan, Fajar Pranawa Jati, Yudha Samodra

Abstract


A distribution panel is a piece of equipment or device that consists of several electrical components that are arranged and arranged in such a way that they can distribute electrical power, and its use must guarantee security for users, so a Type-test is needed to determine the security of the distribution panel, one of the type-test tests is the temperature rise test. The temperature rise test was successfully carried out, but there are still problems, namely the heat distribution is unknown. The Computational Fluid Dynamics (CFD) method with flow simulation software can be used for heat transfer analysis in distribution panel systems, so that an ideal panel design is obtained to overcome overheating. The CFD analysis process is carried out by comparing 3 distribution panel designs, namely the first design using an exhaust fan, the second design with one output ventilation, and the design without an exhaust fan. Based on the results of the CFD analysis, the safest distribution panel results were obtained, namely the first design using an exhaust fan, the design with an exhaust fan experienced a temperature drop of 4°C compared to the design without an exhaust fan and the second design when viewed from surface 9.

Full Text:

PDF

References


Stokes, G., “Handbook of Electrical Installation Practice. (Ed. 4)”, Wiley-Blackwell US, 2003

Pratama, FS., Nugraha, PD., “Rancang Bangun Panel Distribusi dengan Posisi Support yang Ideal pada Busbar Connection dengan Metode Computer Aided Engineering”, Tugas Akhir: Politeknik ATMI Surakarta, 2022

Beritung, J., Roling, C., Salih, N., “Lagrange Multiplier Type Tests For Slope Homogeneity In Panel Data Models”, The Econometrics Journal, Vol. 19, No. 2, pp 166 – 202, 2016, doi: 10.1111/ectj.12070

Miftah, R., “Modul Training Panel Listrik”. PT. Trias Indra Saputra, 2018

Candra, C., Pratama, EM., “Analisa Pengaruh Variasi Ukuran Lebar Busbar terhadap Sistem Keamanan Panel Distribusi dengan Computer Aided Engineering”, Tugas Akhir, Surakarta: Politeknik ATMI Surakarta, 2022

Al-Mulki. AM., Giyatno, DW., “Penghitungan Hotspot Temperature Pada Temperature Rise Test Transformator 60MVA”, Tugas Akhir, 2020, Yogyakara: Universitas Gadjah Mada

Iderus, S., Peter, G., Ganji, V., “An Innovative Method To Conduct Temperature Rise Test On Mediumvoltage Switchgear Assembly Based On IEC Standards In A Powergrid”, The Journal of Engineering, Vol. 2023., No. 1., pp 1-23., 2023, DOI: 10.1049/tje2.12166

Maulana, S., “Pemanfaatan Computational Fluid Dynamics (CFD) Dalam Strategi Penelitian Simulasi Model Pada Teknologi Penghawaan Ruang,” Jurnal Education Building, vol. 2 , no. 2, pp 10-13, 2016, ISSN : 2477-4898

Yudhatama, I., Hidayat, I., jatiwurni, W., “Simulasi Computational Fluid Dynamics (CFD) Erosi Partikel Pasir dalam Aliran Fluida Gas Turbulen pada Elbow Pipa Vertikal – Horizontal” Jurnal Teknik ITS, vol. 7 , no. 2, pp 134-139, 2016, ISSN : 2337-3539

Stefanditya, Y., kusbagyo. F., Kurniawan, A., Prabandono, B., “Design of Rocket Stove with Computational Fluid Dynamics (CFD) Simulation”, The 4th Borobudur International Symposium, 2022




DOI: https://doi.org/10.18196/jmpm.v7i2.19905

Refbacks

  • There are currently no refbacks.


 

Editorial Office :

JMPM (Jurnal Material dan Proses Manufaktur)

Department of Mechanical Engineering, Faculty of Engineering, Universitas Muhammadiyah Yogyakarta.

Jl. Brawijaya Tamantirto Kasihan Bantul 55183 Indonesia

Email: jmpm@umy.ac.id

Telp/Fax: (62)274-387656    

Whatsapp: 085642095827