Design and Analysis of Finger Prosthetics Using Finite Element Methods

Faza Agisna, Dhananjaya Yama Hudha Kumarajati, Amalia Cemara Nur’aidha

Abstract


According to the Central Statistics Agency (BPS), the total number of physically disabled people in Indonesia until 2020 reached 22.5 million people. However, only around 18% use assistive devices. 3D printing technology in the world of health can be used to print prosthetic materials. However, many previous functional prosthetic designs were still fabricated conventionally and did not pay attention to prosthetic standards and quality. One computational testing method that can be used to test prosthetic strength is the finite element method. The aim of this research is to produce a functional finger prosthetic design that has tested its strength through computational simulations using the finite element method to minimize prosthetic production costs so that the resulting prosthetics are more affordable.The tools needed in this research are a ruler for finger measurements and a computer or laptop with Fusion 360 software.Based on the analysis results, it shows that this model is able to withstand loads of up to 100 N with deformation, stress and safety factor values produced respectively of 0.016 mm, 27,605 MPa and 7.49.

Full Text:

PDF

References


S. Virlia and A. Wijaya, "Self-Acceptance in People with Physical Impairment," no. 4, pp. 978–979, 2015.

ZF Emzain, US Amrullah, and A. Mufarrih, “Design and Finite Element Analysis of Ankle-Foot Prosthetic Models,”Infotechmachine, vol. 11, no. 2, pp. 87–93, 2020, doi: 10.35970/infotekmesin.v11i2.257.

KJ Young and JE Pierce, “Assessment of body-powered 3D printed partial finger prostheses: case studies,” vol. 0, 2019.

MF Amirullah, D. Kuswanto, and AD Krisbianto, "Open Source Based Bionic Arm Design (HACKberry Arm) for Children with Trans-radial Amputees to Be More Confident," no. January 2022, pp. 89–95, 2021, [Online]. Available: https://www.researchgate.net/profile/Djoko-Kuswanto/publication/357578406_Desain_Lengan_Bionik_Based_Open_Source_HACKberry_Arm_untuk_Anak-Anak_Tunadaksa_Amputation_Trans-radial_agar_More_Percaya_Diri/links/61d56fb1da5d105e551d6a6e/Desa in-Bionic-Arm-B

H. Basumatary and SM Hazarika, “State of the art in bionic hands,”IEEE Trans. Human-Machine Syst., vol. 50, no. 2, pp. 116–130, 2020, doi: 10.1109/THMS.2020.2970740.

AA Subiantari, E. Wahyuningtyas, and H. Mustiko D, "Prosthetic Rehabilitation of Finger Protheses with Rtv Silicone Material to Restore Shape and Aesthetics,"Maj. Covert. Indonesian Teeth., vol. 21, no. 1, p. 84, 2015, doi: 10.22146/majkedgiind.8524.

KJ Young, JE Pierce, and JM Zuniga, “Assessment of body-powered 3D printed partial finger prostheses: a case study,”3D Printing. Med., vol. 5, no. 1, 2019, doi: 10.1186/s41205-019-0044-0.

KS Putra and UR Sari, "Utilization of 3D Printing Technology in the Lifestyle Product Design Process,"Semin. Nas. Sis. Inf. and Technol. Inf. 2018, pp. 1–6, 2018.

H. Dodziuk, “Applications of 3D printing in healthcare,”Cardiochirurgia i Thoracohirurgia Pol., vol. 13, no. 3, pp. 283–293, 2016, doi: 10.5114/kitp.2016.62625.

ITKSK Gatot Sunarto, "Cost Effectiveness of Using 3D Printing Technology (Industry 4.0) in Orthotic Prosthetic Aids," vol. 14, pp. 17–26, 2023.

K. Wibawa, Lasinta Ari Nendra; Diharjo, "Design, Material Selection, and Safety Factors for Device Charging Stations Using the Finite Element Method,"Technology, vol. 11 No. 2, no. 2, pp. 97–102, 2019.

RI Yaqin, BH Priyambodo, AB Prasetiyo, and ML Umar, "Application of the Finite Element Method in Material Selection in Plastic Shredding Machine Blade Design,"Sci. J. Mech. Eng. Kinemat., vol. 6, no. 2, pp. 85–98, 2021, doi: 10.20527/sjmekinetika.v6i2.190.

L. Ari and N. Wibawa, "DESIGN AND STRENGTH ANALYSIS OF BALAI LAPAN GARUT WORKBENCH USING Lasinta Ari Nendra Wibawa," vol. 3, no. 1, pp. 13–17, 2019.

S. Susmartini, I. Priyadithama, and ..., "Selection of Prosthetic Finger Design Based on the Mechanism of the Cross Bar and Cross Cable Drive System against the Dynamic Tensile Force of the Prosthetic Finger...,"… Science. Tech. Ind., vol. 10, no. 2, pp. 141–148, 2011, [Online]. Available: https://jurnal.uns.ac.id/performa/article/view/13872%0A https://jurnal.uns.ac.id/performa/article/viewFile/13872/11530

IHD and PWR Abdurrachman;, "Anatomy and Kinematics of Movement in Humans_compressed,"Anatomy and Kinematics of Movement in Humans, vol. 1, no. Media intelligence. pp. xii–152, 2017.

SD Hariyanto, R. Adi Himarosa, A. Brian Aditya, S. Hidayat, E. Sulistyo Wibowo, and D. Nandy Krisnansia, "Development of Design and Fabrication Concepts for Duku Fruit Sorting Machines (Lansium Parasiticum),"JMPM (Journal of Mater. and Manufacturing Processes), vol. 4, no. 2, pp. 91–102, 2020, doi: 10.18196/jmpm.v4i2.11433.

JA Furqan, ATA Salim, I. Yuwono, AP Utomo, U. Muchtar, and D. Saputra, "Redesign Jig Side Frame of Jabodebek Lrt Bogie,"JMPM (Journal of Mater. and Manufacturing Processes), vol. 6, no. 2, pp. 75–87, 2022, doi: 10.18196/jmpm.v6i2.15710.

AB Prasetiyo, KA Sekarjati, and S. Haryo, "Design and Analysis of the Effect of Variation of Compression Force on Allen Key Using Finite Element Analysis Method,"SJME Kinemat., vol. 7, no. 1, pp. 39–52, 2022, doi: 10.20527/sjmekinetika.v7i.

A. Aswin and F. Anggara, "Design and Analysis of Horizontal Pressure Vessel Separator Stresses Using the Finite Element Method,"Sci. J. Mech. Eng. Kinemat., vol. 7, no. 2, pp. 83–97, 2022, doi: 10.20527/sjmekinetika.v7i2.219.

F. de Prenter, CV Verhoosel, EH van Brummelen, MG Larson, and S. Badia,Stability and Conditioning of Immersed Finite Element Methods: Analysis and Remedies, vol. 30, no. 6. Springer Netherlands, 2023. doi: 10.1007/s11831-023-09913-0.

M. Ćorak, Z. Šperanda, J. Čokić, M. Palaversa, and J. Parunov, “Finite Element Simulations of Novel Submersible Design Based on the ASME Design-by-Analysis Approach,”J. Mar. Sci. Eng., vol. 11, no. 2, 2023, doi: 10.3390/jmse11020275.

R. Setiawan, D. Sugiyanto, and Ari Daryus, "STRENGTH SIMULATION ANALYSIS AND FRAME FABRICATION OF ELECTRIC MOTORCYCLE VEHICLES Analysis of Strength Simulation and Frame Fabrication of Electric Motorcycle Vehicles,"J. Energy Conversion and Manufacturing, vol. 8, no. 1, pp. 58–66, 2023.




DOI: https://doi.org/10.18196/jmpm.v8i1.22283

Refbacks

  • There are currently no refbacks.


 

Editorial Office :

JMPM (Jurnal Material dan Proses Manufaktur)

Department of Mechanical Engineering, Faculty of Engineering, Universitas Muhammadiyah Yogyakarta.

Jl. Brawijaya Tamantirto Kasihan Bantul 55183 Indonesia

Email: jmpm@umy.ac.id

 (62)274-387656     (62)274-387656