Physical and mechanical properties of semi-automatic MIG welding of AA5083H116 materials
Abstract
Keywords
Full Text:
PDFReferences
Wiryosumarto, H., dan Okumura, T. Teknologi Pengelasan Logam. Jakarta: Pradnya Paramita. 2000: 20-23.
Zain, H. Peraturan Menteri Tenaga Kerja dan Transmigrasi Republik Indonesia No: PER.02/MEN/1992. Tentang Kwalifikasi Juru Las di Tempat Kerja. Kementerian Tenaga Kerja dan Transmigrasi RI. Jakarta: Depnakertrans. 1982: 1-28.
Haelsig, A., Kusch, M., Mayer, P. New findings on the efficiency of gas shielded arc welding, Welding in the World. 2012; 56: 98-104.
Borrego, L.P., Costa, J.D., Jesus, J.S., Loureiro, A.R., Ferreira, J.M. Fatigue life improvement by friction stir processing of 5083 aluminium alloy MIG butt welds. Theoretical and Applied Fracture Mechanics. 2014; 70: 68-74.
Brumm, S., Bürkner, G. Gas metal arc pulse welding with alternating current for lightweight materials, Materials Today: Proceedings. 2015; 2S: S179-S187.
Zhang, Z., Liu, L., Song, G. Welding characteristics of AZ31B magnesium alloy using DC-PMIG welding, Trans. Nonferrous Met. Soc. China. 2013; 23: 315-322.
Gray, T., Camilleri, D., McPherson, N. Control of welding distortion in thin-plate fabrication. UK: Wood Publishing. 2014: 133.
Mudjijana, Moch. Noer Ilman, Priyo Tri Iswanto. Karakterisasi pengaruh kecepatan las
pada pengelasan MIG AA5083H116 dengan elektroda ER5356. POROS. 2017; 15 : 26-34.
Farag, M.M. Materials and process selection for engineering design. New York: CRC Press. 2014: 167.
DOI: https://doi.org/10.18196/jmpm.2116
Refbacks
- There are currently no refbacks.
Editorial Office :
JMPM (Jurnal Material dan Proses Manufaktur)
Department of Mechanical Engineering, Faculty of Engineering, Universitas Muhammadiyah Yogyakarta.
Jl. Brawijaya Tamantirto Kasihan Bantul 55183 Indonesia
Email: jmpm@umy.ac.id
Telp/Fax: (62)274-387656
Whatsapp: 085642095827