Rancang Bangun Mesin Aqueous Cleaning Spray untuk Otomatisasi Proses Pencucian Produk High Speed Stamping di PT. ATMI IGI

Hoedi Prasetyo, Nurhadi Kusumo Yuwono, Aloysius Avid Prabowo, Valentino Arlis Prasetya, Yehuda Laurentinus

Abstract


Produkhasil permesinan high speed stamping masih mengandung kotoran dan pelumas sehingga perlu dicuci terlebih dulu sebelum diproses lebih lanjut. Penelitian ini bertujuan melakukan otomatisasi proses pencucian produk high speed stamping di PT. ATMI IGI melalui rancang bangun mesin cuci berteknologi aqueous cleaning spray. Mesin memiliki dari 5 tahap proses yaitu Feeder, Pre-Wash, Wash, Rinse dan Spinning. Produk stamping dicuci secara otomatis melalui mekanisme konveyor, semprotan larutan deterjen, dan pengayak. Berdasar hasil uji coba, diketahui mesin memerlukan waktu rata-rata sebesar 34,5 detik untuk mencuci satu keranjang produk stamping. Mesin mampu mencuci 25 kali lebih cepat dibandingkan dengan proses pencucian secara manual. Penggunaan mesin berpotensi meningkatkan produktivitas dan efisiensi tenaga kerja. Mesin pada penelitian ini masih perlu dikembangkan untuk meningkatkan efisiensi proses pencucian dan masa pakai penggunaan cairan pembersih.


Washing process in order to remove dirt and lubricants from the products before further processing is required in high speed stamping. This research aims to automate the high speed stamping washing process in PT. ATMI IGI by designing aqueous cleaning spray machine. The machine consists of five stages namely Feeder, Pre-Wash, Wash, Rinse and Spinning. The machine washes the stamping products automatically by mechanism of spraying cleaning solution, conveying, and sifting. Based on the trial results, the machine takes an average of 34.5 seconds to wash a basket of stamping products. The machine is able to wash 25 times faster than the manual wash. The machine potentially increase the productivity and labor efficiency. The machine being designed in this research still needs to be developed to improve the efficiency of the washing process and to prolong the cleaning solution lifetime.




Keywords


high speed stamping; aqueous cleaning spray; otomatisasi; konveyor; inovasi proses

Full Text:

PDF

References


Altan, T., & Tekkaya, A. E. (Eds.). Sheet metal forming: processes and applications. Ohio: ASM international. 2012: 10.

Xiao, M. H., Yu, L. B., Li, G. H., & Liang, W. J. Development of High Speed Precision Press and its Development Trends. Key Engineering Materials. 2016; 693: 89-92.

Durkee, J. Management of industrial cleaning technology and processes. Elsevier. 2006: 1-41.

Durkee, J. The second cleaning process: The oil skimmer-part I. Metal Finishing. 2008; 106(6): 86-88.

Tulinski, E.H. Aqueous washing systems. Metal Finishing. 2007; 105(10): 129-138.

Yamamoto, Y., Bellgran, M. Four types of manufacturing process innovation and their managerial concerns. Procedia CIRP. 2013; 7: 479-484.

Smith, R.W. Successful aqueous washing. SME Technical Paper. 1994: 94-126.

Grewal, M.S. Switch to Aqueous Technology Gives Gillette Edge in Blade Manufacturing. Precision Cleaning - The Magazine of Critical Cleaning Technology. 1995: 15-26.

Halim, I., Omar, A. R., & Saad, N. H. Ergonomic assessment to identify occupational risk factor in metal stamping industry. NAME. 2005; 5: 2005.

Mitschele, M. Reliable and Rapid Degreasing of Deep Drawn Parts. JOT-International Surface Technology. 2011; 4(1): 50-51.

Landi, D., Germani, M., Mandolini, M., Marconi, M., & Favi, C. Environmental and Economic Evaluation of the Sheet Metal Stamping Process Using Alternative Lubricants. International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. California. 2019: V004T05A027.

Mitschele, M. Fully Automatic Cleaning Line with Clean Room Connection. IST International Surface Technology. 2014; 7(2): 24-25.

Klabuschnig, J. Aqueous cleaning process with solvent-based corrosion protection. IST International Surface Technology. 2017; 10(3): 46-47.

Sundin, E., Elo, K., & Lee, H. M. (2012). Design for automatic end‐of‐life processes. Assembly Automation. 2012; 32(4): 389-398.

Eppinger, S., Ulrich, K. Product design and development. McGraw-Hill Higher Education. 2015: 15.

Durkee, J. Cleaning times: Aqueous cleaning machines: How they work, and why—part II. Metal Finishing. 2009; 107(4): 65-66.

Durkee, J. Cleaning times: Spray nozzles play critical role in aqueous, solvent cleaning machines. Metal Finishing. 2009; 107(6): 80-82.

Henghui, X., & Xuan, S. The Design of Spray Cleaning Machine. Proceedings of the International Symposium on Big Data and Artificial Intelligence. Hong Kong. 2019: 224-227.

Reeder, C. H. Centrifugal Dryer. U.S. Patent No. 3,391,469. 1968.

Habasit. Product Data Sheet: Habasit LINK M2540 Radius Flush Grid. 2019.

Habasit. Product Data Sheet: M1234 Nub Top Flush Grid. 2018.

Kim, H. S., & Kweon, J. H. Cleaning of lubricating products from machinery parts using subcritical water. KSCE Journal of Civil Engineering. 2010; 14(1): 1-6.

Pettigrew, L., & Nghiem, L. D. (2011). Aqueous cleaning of manufactured parts/components: establishing the role of solution quality. International Journal of Sustainable Manufacturing. 2011; 2(2-3): 127-140.




DOI: https://doi.org/10.18196/jmpm.v4i1.9123

Refbacks

  • There are currently no refbacks.


 

Editorial Office :

JMPM (Jurnal Material dan Proses Manufaktur)

Department of Mechanical Engineering, Faculty of Engineering, Universitas Muhammadiyah Yogyakarta.

Jl. Brawijaya Tamantirto Kasihan Bantul 55183 Indonesia

Email: jmpm@umy.ac.id

Telp/Fax: (62)274-387656    

Whatsapp: 085642095827