Pengaruh Penggunaan Bambu Sebagai Pengganti Agregat Split terhadap Kuat Tekan Beton Ringan

Authors

  • As’at Pujianto Universitas Muhammadiyah Yogyakarta
  • M. Tajuddin Universitas Muhammadiyah Yogyakarta

DOI:

https://doi.org/10.18196/st.v15i2.1357

Keywords:

bamboo, aggregate replacement, concrete, flowing method

Abstract

The use of bamboo as an aggregate replacement is one of the efforts to reduce the density and static load of structural elements, sincethe structural strength of bamboo is high. This study focus on the issue of the using bamboo as aggregate concrete with flowing method on a review of specific gravity and compressive strength of the concrete. This study uses bamboo as a percentage of the aggregate at 0% (normal), 20%, 40%, 60%, 80% and 100% of the conventional split and using additional silicafume aggregates. Specimens used in this study is the concrete cylinder (diameter 15 cm and height 30 cm). The identification and testing of tap density after 14 days of treatment.Results show that using more bamboo aggregate will result lower slump value, higher water absorption, decreasing in both specific gravity and compressive strength.

Downloads

How to Cite

Pujianto, A., & Tajuddin, M. (2016). Pengaruh Penggunaan Bambu Sebagai Pengganti Agregat Split terhadap Kuat Tekan Beton Ringan. Semesta Teknika, 15(2), 143–148. https://doi.org/10.18196/st.v15i2.1357

Issue

Vol. 15 No. 2 (2012): NOVEMBER 2012

Section

Articles

License


Semesta Teknika is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).