Analysis of Problems and Prospects for Improving Automatic Control Systems of Interconnected Electric Drives
Abstract
The aim of this study was to analyse the problems and prospects for improving automatic control systems of interconnected electric drives. Various methods, including analytical, classification, functional, statistical, and synthesis, were used to provide recommendations for error correction in the design processes of these systems and to detail their functioning. The study revealed the peculiarities and differences of automatic control systems of interconnected electric drives. The study analysed the errors made during the operation of these systems and the reasons for their occurrence. It also identified uncertainties in the development process and their impact on the functioning of the systems. The mechanism's efficiency, development, and complexity in different spheres were analysed. The text also considered issues related to estimating the operation of systems, limitations during operation, and the influence of limitations on results. Recommendations for promoting more effective regulation have been provided. The research showed that these systems play a crucial role in complex technological processes. The results have vague practical implications for developing the mechanism of automatic control systems for interconnected electric drives to apply and influence a certain device. In conclusion, the study analysed the problems and prospects for improving automatic control systems for interconnected electric drives.
Keywords
Full Text:
PDFReferences
P. F. Stanbury, A. Whitaker, and S. J. Hall, “Instrumentation and control,” in Principles of Fermentation Technology, pp. 487-536, 2016.
C. Datlinger and M. Hirz, "Benchmark of Rotor Position Sensor Technologies for Application in Automotive Electric Drive Trains," Electronics, vol. 9, no. 7, 2020, doi: 10.3390/electronics9071063.
H-K. Hoai, S-C. Chen, and C-F. Chang, “Realization of the Neural Fuzzy Controller for the Sensorless PMSM Drive Control System,” Electronics, vol. 9, no. 9, 2020, doi: 10.3390/electronics9091371.
S. Widadi, S. Al Badrun Munir, N. Shahu, I. Ahmad, and I. Al Barazanchi, “Automatic Wireless Nurse Caller,” Journal of Robotics and Control (JRC), vol. 2, no. 5, pp. 380-384, 2021, doi: 10.18196/jrc.25111.
W. Zhang, Y. Ning, and C. Suo, "A Method Based on Multi-Sensor Data Fusion for UAV Safety Distance Diagnosis," Electronics, vol. 8, no. 12, 2019, doi: 10.3390/electronics8121467.
A. Merabet, "Advanced Control for Electric Drives: Current Challenges and Future Perspectives," Electronics, vol. 9, no. 11, 2020, doi: 10.3390/electronics9111762.
V. A. Ichev and A. D. Umurzakova, “Study of the operation of a belt conveyor under various dynamic characteristics,” in Proceedings of Improving the Quality of Education, Modern Innovations in Science and Production, pp. 286-294, 2021.
M. S. Kulgildinov, N. S. Kamzanov, and A. E. Kanazhanov, “Analysis of the technological scheme and the process of interaction between the cutter and the road surface during milling,” Bulletin of Satbayev Kazakh National Technical University, vol. 143, no. 3, pp. 230-239, 2021, doi: 10.51301/vest.su.2021.i3.30.
A. Gaber, M. Elnaggar, and H. A. Fattah, “Looper and tension control in hot strip finishing mills based on different control approaches,” Journal of Engineering and Applied Science, vol. 69, 2022, doi: 10.1186/s44147-022-00145-w.
C. Idzik, A. Krämer, G. Hirt, and J. Lohmar, “Coupling of an analytical rolling model and reinforcement learning to design pass schedules: towards properties controlled hot rolling,” Journal of Intelligent Manufacturing, pp. 1-22, 2023, doi: 10.1007/s10845-023-02115-2.
O. A. Baimuratov, B. R. Kangozhin, and S. S. Dautov, “About software and hardware measuring systems and their capabilities/features in industry,” Suleyman Demirel University Bulletin: Natural and Technical Sciences, vol. 55, no. 2, pp. 71-82, 2021.
S. Štatkić, I. B. Jeftenić, M. Z. Bebić, Ž. Milkić, and S. Jović, “Reliability assessment of the single motor drive of the belt conveyor on Drmno open-pit mine,” International Journal of Electrical Power & Energy Systems, vol. 113, pp. 393-402, 2019, doi: 10.1016/j.ijepes.2019.05.062.
V. Kravchenko et al., “Mathematical Model of a Robot-spider for Group Control Synthesis: Derivation and Validation,” Journal of Robotics and Control (JRC), vol. 4, no. 6, pp. 849-855, 2023, doi: 10.18196/jrc.v4i6.20325.
H. Pratama, M. N. A. Azman, N. A. Zakaria, and M. Khairudin, “Development of programmable logic controller teaching aids on electrical motor installation course among vocational school students in Aceh, Indonesia,” in Materials of International Practical Internet Conference “Challenges of Science”, pp. 117-127, 2021.
G. Bhatti, H. Mohan, and R. R. Singh, “Towards the future of smart electric vehicles: Digital twin technology,” Renewable and Sustainable Energy Reviews, vol. 141, 2021, doi: 10.1016/j.rser.2021.110801.
J. C. Ferraro and M. Mouloua, “Effects of automation reliability on error detection and attention to auditory stimuli in a multi-tasking environment,” Applied Ergonomics, vol. 91, 2019, doi: 10.1016/j.apergo.2020.103303.
Y. Apriani, Z. Saleh, S. Suppermen, and I. Sofian, “Automatic Voltage Regulator as a Voltage Control in 1 Phase Axial Generator System,” Journal of Robotics and Control (JRC), vol. 2, no. 5, pp. 429-434, 2021, doi: 10.18196/jrc.v2i5.25118.
M. A. Hawwa, S. Ali, and D. E. Hardt, “Influence of roll-to-roll system’s dynamics on axially moving web vibration,” Journal of Vibroengineering, vol. 21, no. 3, pp. 556-569, 2019, doi: 10.21595/jve.2018.19872.
O. Khasanov, Z. Khasanov, and N. Khasanova, "The modeling of multicircuit control systems in robotized technological complex," 2019 International Conference on Electrotechnical Complexes and Systems (ICOECS), pp. 1-4, 2019, doi: 10.1109/ICOECS46375.2019.8949965.
E. F. Fuchs and M. A. S. Masoum, “Power system modeling under nonsinusoidal operating conditions,” in Power Quality in Power Systems, Electrical Machines, and Power-Electronic Drives, pp. 703-803, 2023, doi: 10.1016/B978-0-12-817856-0.00008-X.
E. V. Yurasova, M. N. Biziaev, and A. S. Volosnikov, “Approaches in a Sensor Model of Error Correction in Dynamic Measurements,” Procedia Engineering, vol. 129, pp. 764-769, 2015, doi: 10.1016/j.proeng.2015.12.101.
Z. Wang, K. Yu, Y. Li, and M. Gu, "Position Sensorless Control of Dual Three-Phase IPMSM Drives With High-Frequency Square-Wave Voltage Injection," IEEE Transactions on Industrial Electronics, vol. 70, no. 10, pp. 9925-9934, 2023, doi: 10.1109/TIE.2022.3222683.
L. Wang, H. Li, J. Huang, J. Zeng, L. Tang, W. Wu, and Y. Luo, "Research on and Design of an Electric Drive Automatic Control System for Mine Belt Conveyors", Processes, vol. 11, no. 6, 2023, doi: 10.3390/pr11061762.
J. Hu, Y. Yang, M. Jia, Y. Guan, C. Fu, and S. Liao, “Research on Harmonic Torque Reduction Strategy for Integrated Electric Drive System in Pure Electric Vehicle,” Electronics, vol. 9, no. 8, 2020, doi: 10.3390/electronics9081241.
P. S. Jamwal, S. Singh, and S. Jain, “Controller optimisation under different drive cycles for induction motor driven electric vehicle fed through multilevel inverter,” International Journal of Power Electronics, vol. 19, no. 1, pp 53-78, 2023, doi: 10.1504/IJPELEC.2024.135700.
S. E. Ryvkin, and E. P. Lever, Sliding Mode Control for Synchronous Electric Drives. Boca Raton: CRC Press, 2011.
T. Johansson, “Testing for control system interdependence with structural equation modeling: Conceptual developments and evidence on the levers of control framework,” Journal of Accounting Literature, vol. 41, pp. 47-62, 2018, doi: 10.1016/j.acclit.2018.02.002.
J. B. Davidson, J. G. A. Cashaback, and S. L. Fischer, “Exploring Optimal Objective Function Weightings to Predict Lifting Postures Under Unfatigued and Fatigued States,” Human Factors, vol. 66, no. 2, pp. 510-527, 2024, doi: 10.1177/00187208221096928.
W. P. Neumann, S. Winkelhaus, E. H. Grosse, and C. H. Glock, “Industry 4.0 and the human factor – A systems framework and analysis methodology for successful development,” International Journal of Production Economics, vol. 233, 2021, doi: 10.1016/j.ijpe.2020.107992.
A. Arefeen, J. Quarnstrom, S. P. Q. Syed, H. Bai, and Y. Xiang, “Human–Robot Collaborative Lifting Motion Prediction and Experimental Validation,” Journal of Intelligent & Robotic Systems, vol. 109, 2023, doi: 10.1007/s10846-023-02013-y.
V. M. Juromskiy, “Engineering model of the electric drives of separation device for simulation of automatic control systems of reactive power compensation by means of serially connected capacitors,” Journal of Physics: Conference Series, vol. 751, 2016, doi: 10.1088/1742-6596/751/1/012010.
I. L. Tarasova, A. E. Gorodetskiy, and V. G. Kurbanov, “Mathematical Models of the Automatic Control Systems SEMS Modules,” in A. Gorodetskiy, Eds, Smart Electromechanical Systems. Studies in Systems, Decision and Control, vol. 49, 2016. doi: 10.1007/978-3-319-27547-5_14.
Z. Lyu, L. Wu, and P. Song, "A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit," IEEE Transactions on Power Electronics, vol. 39, no. 2, pp. 2558-2568, 2024, doi: 10.1109/TPEL.2023.3329934.
C. Zotica, D. Pérez-Piñeiro, and S. Skogestad, “Optimal Operation and Control of a Thermal Energy Storage System: Classical Advanced Control versus Model Predictive Control,” Computer Aided Chemical Engineering, vol. 48, pp. 1507-1512, 2020, doi: 10.1016/B978-0-12-823377-1.50252-4.
A. A. Dnekeshev and V. A. Kushnikov, “Automation systems for production processes of oil refineries of the Republic of Kazakhstan,” Natural and Engineering Sciences, vol. 8, pp. 174-179, 2018.
M. Azad, J. Babič, and M. Mistry, “Effects of the weighting matrix on dynamic manipulability of robot,” Autonomous Robots, vol. 43, pp. 1867–1879, 2019, doi: 10.1007/s10514-018-09819-y.
K. K. Tokhtibakiev and A. A. Saukhimov, “Real-time monitoring of the throughput capacity of intersystem communications of the national energy system of Kazakhstan using a system of synchronized vector measurements,” Technical Electrodynamics, vol. 4, pp. 62-65, 2015.
J. Hu, Y. Yang, M. Jia, Y. Guan, and T. Peng, "A Novel Energy Optimization Control Strategy for Electric Drive System Based on Current Angle," Applied Sciences, vol. 10, no. 11, 2020, doi: 10.3390/app10113778.
D. Alcázar-García and J. L. R. Martínez, “Model-based design validation and optimization of drive systems in electric, hybrid, plug-in hybrid and fuel cell vehicles,” Energy, vol. 254, 2022, doi: 10.1016/j.energy.2022.123719.
A. Steinboeck, G. M¨uhlberger, and A. Kugi, “Control of Strip Tension in a Rolling Mill Based on Loopers and Impedance Control,” IFAC Proceedings Volumes, vol. 47, no. 3, pp. 10646-10651, 2014, doi: 10.3182/20140824-6-ZA-1003.00993.
P. N. Kovrizhnykh, D. O. Kozhamsugirov, S. N. Kozhevnikov, D. V. Makarov, and D. Y. Kapshtan, “Innovative aeromagnetic survey using an unmanned aerial vehicle in the search for ore deposits in Kazakhstan,” Geology and Conservation of Mineral Resources, vol. 4, pp. 34-42, 2017.
L. De Novellis, A. Sorniotti, and P. Gruber, “Driving modes for designing the cornering response of fully electric vehicles with multiple motors,” Mechanical Systems and Signal Processing, vol. 64–65, pp. 1-15, 2015, doi: 10.1016/j.ymssp.2015.03.024.
U. Hafsa and F. Arifin, “Design and Implementation of an Automatic Speed Control System of Vehicles for Avoiding Road Accidents in Bangladesh,” Journal of Physics: Conference Series, vol. 2312, 2022, doi: 10.1088/1742-6596/2312/1/012006.
J. R. Su et al., “Impact of a real-time automatic quality control system on colorectal polyp and adenoma detection: A prospective randomized controlled study,” Gastrointestinal Endoscopy, vol. 91, no. 2, pp. 415-424, doi: 10.1016/j.gie.2019.08.026.
T. Wang, G. Luo, C. Liu, Z. Chen, and W. Tu, "Speed Control for Variable Speed PMSM Drive System Using Nonlinear Variable-Horizon Predictive Functional Control," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 11, no. 2, pp. 1454-1465, 2023, doi: 10.1109/JESTPE.2022.3179386.
Z. Hou, and S. Xiong, “On model-free adaptive control and its stability analysis,” IEEE Transactions on Automatic Control, vol. 64, no. 11, pp. 4555-4569, 2019, doi: 10.1109/TAC.2019.2894586.
V. D. Borisevich and V. M. Juromskiy, “Adaptive system for automatic stabilization of the power factor for electric drives of separation device by means of serially connected capacitors bank,” Journal of Physics: Conference Series, vol. 751, 2016, doi: 10.1088/1742-6596/751/1/012011.
M. Malarczyk, M. Zychlewicz, R. Stanislawski, and M. Kaminski, "Electric Drive with an Adaptive Controller and Wireless Communication System," Future Internet, vol. 15, no. 2, 2023, doi: 10.3390/fi15020049.
J. Berberich, J. Kohler, M. A. Muller, and F. Allgower, “Data-driven model predictive control with stability and robustness guarantees,” IEEE Transactions on Automatic Control, vol. 66, no. 4, pp. 1702-1717, 2021, doi: 10.1109/TAC.2020.3000182.
L. Yin and X. Cao, “Quantum-inspired distributed policy-value optimization learning with advanced environmental forecasting for real-time generation control in novel power systems,” Engineering Applications of Artificial Intelligence, vol. 129, 2024, doi: 10.1016/j.engappai.2023.107640.
J. Coulson, J. Lygeros, and F. Dorfler, “Distributionally robust chance constrained data-enabled predictive control,” IEEE Transactions on Automatic Control, vol. 67, no. 7, pp. 3289-3304, 2021, doi: 10.1109/TAC.2021.3097706.
V. K. Awaar, S. Rani, P. Naragani, S. Talluri, S. Polisetty, S. S. Vakkalanka, and H. M. Al-Jawahry, “Speed Control of Induction Motor using Digital Signal Processor TMS320F28027F,” E3S Web Conference, vol. 391, 2023, doi: 10.1051/e3sconf/202339101178.
C. De Persis and P. Tesi, “Formulas for data-driven control: Stabilization, optimality, and robustness,” IEEE Transactions on Automatic Control, vol. 65, no. 3, pp. 909-924, 2019, doi: 10.1109/TAC.2019.2959924.
D. Ding, Z. Wang, and Q. L. Han, “A set-membership approach to event-triggered filtering for general nonlinear systems over sensor networks,” IEEE Transactions on Automatic Control, vol. 65, no. 4, pp. 1792-1799, 2019, doi: 10.1109/TAC.2019.2934389.
P. Alkorta, O. Barambones, J. A. Cortajarena, I. Martija, and F. J. Maseda, “Effective Position Control for a Three-Phase Motor,” Electronics, vol. 9, no. 2, 2020, doi: 10.3390/electronics9020241.
P. Ponce, R. Ramirez, M. S. Ramirez, A. Molina, B. MacCleery, and M. Ascanio, “From understanding a simple DC motor to developing an electric vehicle AI controller rapid prototype using MATLAB-Simulink, real-time simulation and complex thinking,” Frontiers in Education, vol. 7, 2022, doi: 10.3389/feduc.2022.941972.
M. Nandakumar, S. Ramalingam, S. Nallusamy, and S. Srinivasarangan Rangarajan, “Hall-Sensor-Based Position Detection for Quick Reversal of Speed Control in a BLDC Motor Drive System for Industrial Applications,” Electronics, vol. 9, no. 7, 2020, doi: 10.3390/electronics9071149.
E. Monmasson, "Electric Motors and Drives: Condition Monitoring, High-Power Applications, and Teaching [Editor’s Column]," IEEE Industrial Electronics Magazine, vol. 17, no. 4, pp. 2-2, 2023, doi: 10.1109/MIE.2023.3323258.
X. Zhao, J. Li, X. Yan, and S. Ji, “Robust Adaptive Cubature Kalman Filter and Its Application to Ultra-Tightly Coupled SINS/GPS Navigation System,” Sensors, vol. 18, no. 7, 2018, doi: 10.3390/s18072352.
B. Ciuffo et al., “Requiem on the positive effects of commercial adaptive cruise control on motorway traffic and recommendations for future automated driving systems,” Transportation Research Part C: Emerging Technologies, vol. 130, 2021, doi: 10.1016/j.trc.2021.103305.
S. Zhang, O. Wallscheid, and M. Porrmann, "Machine Learning for the Control and Monitoring of Electric Machine Drives: Advances and Trends," IEEE Open Journal of Industry Applications, vol. 4, pp. 188-214, 2023, doi: 10.1109/OJIA.2023.3284717.
Z. Zhou, Y. Hu, B. Liu, K. Dai, and Y. Zhang, “Development of Automatic Electric Drive Drilling System for Core Drilling,” Applied Sciences, vol. 13, no. 2, 2023, doi: 10.3390/app13021059.
C. T. Abdallah, I. Lopez, S. K. Jayaweera, and H. Tanner, "Conditions for tracking in networked control systems," Decision and Control, pp. 3626-3632, 2008.
M. Z. Khaneghah, M. Alzayed, and H. Chaoui, "Fault Detection and Diagnosis of the Electric Motor Drive and Battery System of Electric Vehicles," Machines, vol. 11, no. 7, 2023, doi: 10.3390/machines11070713.
I. Polyuschenkov, "Development of Control System for Interconnected Electric Drives with Electromechanical Torsion," 2020 27th International Workshop on Electric Drives: MPEI Department of Electric Drives 90th Anniversary (IWED), Moscow, Russia, 2020, pp. 1-6, doi: 10.1109/IWED48848.2020.9069571.
H. S. Das, M. M. Rahman, S. Li, and C. W. Tan, “Electric vehicles standards, charging infrastructure, and impact on grid integration: A technological review,” Renewable and Sustainable Energy Reviews, vol. 120, 2020, doi: 10.1016/j.rser.2019.109618.
E. F. Fuchs and M. A. S. Masoum, “Performance of power-electronic drives with respect to speed and torque,”. in Power Quality in Power Systems, Electrical Machines, and Power-Electronic Drives, pp. 421-565, 2023, doi: 10.1016/B978-0-12-817856-0.00005-4.
C. O. Omeje and A. O. Salau, “Torque ripples enhancement of a PMBLDC motor propelled through quadratic DC–DC boost converter at varying load,” ISA Transactions, vol. 143, pp. 385-397, 2023, doi: 10.1016/j.isatra.2023.08.027.
M. Hassan et al., “A look-up table-based model predictive torque control of IPMSM drives with duty cycle optimization,” ISA Transactions, vol. 138, pp. 670-686, 2023, doi: 10.1016/j.isatra.2023.02.007.
D. S. Sibirtsev, "Control System for a Synchronized Electric Drive," 2020 2nd International Conference on Control Systems, Mathematical Modeling, Automation and Energy Efficiency (SUMMA), pp. 832-835, 2020, doi: 10.1109/SUMMA50634.2020.9280631.
M. G. Ioannides, A. Stamelos, S. A. Papazis, A. Papoutsidakis, V. Vikentios, and N. Apostolakis, “IoT monitoring system for applications with renewable energy generation and electric drives,” Renewable Energy and Power Quality Journal, vol. 19, pp. 565-570, 2021, doi: 10.24084/repqj19.347.
E. Celik, “Improved stochastic fractal search algorithm and modified cost function for automatic generation control of interconnected electric power systems,” Engineering Applications of Artificial Intelligence, vol. 88, 2020, doi: 10.1016/j.engappai.2019.103407.
K. Shirahata, “Speed Control Methods of Various Types of Speed Control Motors,” Oriental Motor, pp. 1-9, 2022.
J. Nanda, M. Sreedhar, and A. Dasgupta, “A new technique in hydro thermal interconnected automatic generation control system by using minority charge carrier inspired algorithm,” International Journal of Electrical Power & Energy Systems, vol. 68, pp. 259-268, 2015, doi: 10.1016/j.ijepes.2014.12.025.
J. Stoustrup, A. Annaswamy, A. Chakrabortty, and Z. Qu. Smart grid control. Berlin: Springer International Publishing, 2019.
A. Shuraiji and S. Shneen, “Fuzzy Logic Control and PID Controller for Brushless Permanent Magnetic Direct Current Motor: A Comparative Study,” Journal of Robotics and Control (JRC), vol. 3, no. 6, pp. 762-768, 2022, doi: 10.18196/jrc.v3i6.15974.
W. Xu, H. Chen, H. Zhao, and B. Ren, “Torque optimization control for electric vehicles with four in-wheel motors equipped with regenerative braking system,” Mechatronics, vol. 57, pp. 95-108, 2019, doi: 10.1016/j.mechatronics.2018.11.006.
P. Olivella-Rosell, R. Villafafila-Robles, A. Sumper, and J. Bergas-Jané, “Probabilistic Agent-Based Model of Electric Vehicle Charging Demand to Analyse the Impact on Distribution Networks,” Energies, vol. 8, no. 5, pp. 4160-4187, 2015, doi: 10.3390/en8054160.
N. H. Tahrani and P.Wang, “Probabilistic estimation of plug‑in electric vehicles charging load profile,” Electric Power Systems Research, vol. 124, pp. 133‑143, 2015, doi: 10.1016/j.epsr.2015.03.010.
M. Neaimeh et al., “A probabilistic approach to combining smart meter and electric vehicle charging data to investigate distribution network impacts,” Applied Energy, vol. 157, pp. 688-698, 2015, doi: 10.1016/j.apenergy.2015.01.144.
M. Jenkins and I. Kockar, “Electric vehicle aggregation model: A probabilistic approach in representing flexibility,” Electric Power Systems Research, vol. 213, doi: 10.1016/j.epsr.2022.108484.
DOI: https://doi.org/10.18196/jrc.v5i2.20711
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Nurgali Nalibayev, Bolat Kozhageldi, Zhaksylyk Omarov, Aizhan Zhanpeiissova, Murat Tashimbetov
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal of Robotics and Control (JRC)
P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com