The Design of Digital Liquid Density Meter Based on Arduino
Abstract
A measure of liquid thickness is needed to make a dough or formula for medicinal syrup. The tools to measure the thickness available in the market are analog that is less accurate and precision. To overcome these problems, digital density measuring devices are needed. The limitation of the digital density meter, especially liquid, urges the author to carry out further research on the digitization of this measuring instrument. This research aims to make a digital density meter for liquid matter with a high level of measurement accuracy, as the reference measurement study for liquid density in digital form. The instrument was designed using the load cell method as the main sensor. It was also equipped with a DS18B20 water-resistant temperature sensor to measure the temperature of the liquid. The data were analyzed to obtain the accuracy and error of the liquid density measurement from the density meter. The liquid samples used for research were Pertamax, solar, and water. Sample accuracy and error measurement results were 99.83 percent and 0.17 percent respectively for Pertamax, 99.63 percent and 0.37 percent for solar and 99.46 percent and 0.54 percent for water. The measured density value was finally shown on the 16x2 LCD.
Full Text:
PDFReferences
G. Popa and B. Pantelimon, “Another method for measuring the density of the liquid in the volume comparator VC1005,” in 2013 8TH INTERNATIONAL SYMPOSIUM ON ADVANCED TOPICS IN ELECTRICAL ENGINEERING (ATEE), 2013, vol. d, pp. 1–4. doi: 10.1109/ATEE.2013.6563370
R. Kazys et al., “Ultrasonic density measurement of polymer melts in extreme conditions,” in 2013 IEEE International Ultrasonics Symposium (IUS), 2013, pp. 186–189. doi: 10.1109/ULTSYM.2013.0048
M. Heinisch, E. K. Reichel, T. Voglhuber-Brunnmaier, and B. Jakoby, “Characterization and calibration of U-shaped mass density and viscosity sensors by an analytical modeling approach,” in 2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII), 2013, no. June, pp. 1448–1451. doi: 10.1109/Transducers.2013.6627052
B. K. Roy, K. V. Santhosh, R. K. Bharti, and R. Kanthmani, “LabVIEW implementation of liquid density measurement using ultrasonic transducers,” in International Conference on Information Communication and Embedded Systems (ICICES2014), 2014, no. 978, pp. 1–4. doi: 10.1109/ICICES.2014.7034194
P. Kielczynski, M. Szalewski, A. Balcerzak, and K. Wieja, “Density and viscosity of liquids determination using an inverse method for Love wave propagation,” in 2014 IEEE International Ultrasonics Symposium, 2014, vol. 0, no. 2, pp. 1992–1995. doi: 10.1109/ULTSYM.2014.0496.
T. Manzaneque et al., “Density-viscosity sensor based on piezoelectric MEMS resonator and oscillator circuit,” in IEEE SENSORS 2014 Proceedings, 2014, vol. 2014-Decem, no. December, pp. 241–244.
Z. Latifa, M. Ulrich, B. Abdelkader, and H. B. Zakia, “Dynamical behavior and density of the Polymer / Liquid Crystal blends prepared by polymerization induced phase separation,” in 2014 North African Workshop on Dielectic Materials for Photovoltaic Systems (NAWDMPV), 2014, pp. 1–4.
H. Antlinger et al., “Ultrasonic piezoelectric tube resonator for physical liquid property sensing,” in 2014 IEEE International Ultrasonics Symposium, 2014, pp. 2446–2449.
M. Maroufi and M. Shamshirsaz, “Resonant behavior study of PZT sensor in liquid using PSO method,” in 2014 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS (DTIP), 2014, no. April, pp. 1–4.
M. Heinisch, E. K. Reichel, B. Jakoby, T. Voglhuber-Brunnmaier, and I. Dufour, “Investigation of higher mode excitation of resonant mass density and viscosity sensors,” in IEEE SENSORS 2014 Proceedings, 2014, vol. 2014-Decem, no. December, pp. 249–252.
K.-W. Park and H. C. Kim, “High accuracy pressure type liquid level measurement system capable of measuring density,” in TENCON 2015 - 2015 IEEE Region 10 Conference, 2015, vol. 2016-Janua, no. 2, pp. 1–5.
N. A. Lamberti et al., “A resonant sensor for liquid density measurement based on a piezoelectric bimorph,” in 2015 IEEE International Ultrasonics Symposium (IUS), 2015, pp. 1–4.
M. Souza, E. Carvalho, and J. Canuto, “A density and temperature invariant displacer-type liquid level measuring method,” in 2018 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2018, no. 2, pp. 1–5.
T. V. P. Schut, D. Alveringh, W. Sparreboom, J. Groenesteijn, R. J. Wiegerink, and J. C. Lotters, “Fully integrated mass flow, pressure, density and viscosity sensor for both liquids and gases,” in 2018 IEEE Micro Electro Mechanical Systems (MEMS), 2018, vol. 2018-Janua, no. January, pp. 218–221.
J. C. Sanchez-Diaz, J. M. Ramirez-Cortes, P. Gomez-Gil, J. Rangel-Magdaleno, H. Peregrina-Barreto, and I. Cruz-Vega, “On Bernoulli-Euler modeling of an immersed beam for axisymmetric container parameters measurement,” in 2018 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2018, pp. 1–6.
K. Roy, H. Gupta, V. Shastri, A. Dangi, and R. Pratap, “Fluid Density Sensing Using PMUTs,” in 2018 IEEE SENSORS, 2018, vol. 2018-Octob, pp. 1–4.
J.-M. Cabaleiro, T. Paillat, G. Artana, and G. Touchard, “Flow Electrification of Liquids in Rectangular Channels—Comparison of Different Theoretical Models,” IEEE Trans. Ind. Appl., vol. 53, no. 6, pp. 5831–5837, Nov. 2017.
M. Gonzalez, H. Seren, E. Buzi, and M. Deffenbaugh, “Fast downhole fluid viscosity and density measurements using a self-oscillating tuning fork device,” in 2017 IEEE Sensors Applications Symposium (SAS), 2017, pp. 1–5.
M. A. Dayioglu, “Development of real-time wireless monitoring system for greenhouses: Industrial Bluetooth application,” in 2014 22nd Signal Processing and Communications Applications Conference (SIU), 2014, no. Siu, pp. 548–551.
H. Li, H. Xu, J. Wang, X. Fu, and Z. Bai, “Design of Automatic Control System of Coal Sampling Robot Hydraulic System Oil Temperature,” in 2017 9th International Conference on Intelligent Human-Machine Systems and Cybernetics (IHMSC), 2017, vol. 1, pp. 38–42. doi: 10.1109/IHMSC.2017.16
Sun Hao and Chi Zongtao, “Design of the environmental temperature and humidity wireless monitoring system,” in 2015 12th IEEE International Conference on Electronic Measurement & Instruments (ICEMI), 2015, vol. 3, pp. 1652–1657. doi: 10.1109/ICEMI.2015.7494529.
D. Parducho et al., “Smart Wound Dressing with Arduino Microcontroller,” in 2018 IEEE 10th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM), 2018, pp. 1–4. doi: 10.1109/HNICEM.2018.8666281.
G. R. Andrei, T. R. Serban, S. V. Alexandru, and B. L. Dorin, “Simulation of traffic management systems using arduino boards,” in 2016 8th International Conference on Electronics, Computers and Artificial Intelligence (ECAI), 2016, pp. 1–6. doi: 10.1109/ECAI.2016.7861131.
A. C. Eberendu, B. O. Omaiye, and E. C. Nwokorie, “Using android application to turn smart device into digital microscope on Arduino and Window Platform,” in 2017 IEEE 3rd International Conference on Electro-Technology for National Development (NIGERCON), 2017, pp. 508–513. doi: 10.1109/NIGERCON.2017.8281919.
M. Saravanan and A. Das, “Smart real-time meeting room,” in 2017 IEEE Region 10 Symposium (TENSYMP), 2017, pp. 1–5. doi: 10.1109/TENCONSpring.2017.8070069.
G. Yang and F. Li, “Investigation of Security and Defense System for Home Based on Internet of Things,” in 2010 International Conference on Web Information Systems and Mining, 2010, vol. 2, pp. 8–12. doi: 10.1109/WISM.2010.32
S. Folea, G. Mois, M. Hulea, L. Miclea, and V. Biscu, “Data logger for humidity and temperature measurement based on a programmable SoC,” in 2014 IEEE International Conference on Automation, Quality and Testing, Robotics, 2014, pp. 1–4. doi: 10.1109/AQTR.2014.6857877.
E. Raduca, L. Nistor, C. Hatiegan, M. Raduca, I. Padureanu, and S. Draghici, “Web server for command, control and monitoring of industrial equipment,” in 2015 9th International Symposium on Advanced Topics in Electrical Engineering (ATEE), 2015, pp. 61–66. doi: 10.1109/ATEE.2015.7133673.
F. Jazizadeh and W. Jung, “Personalized thermal comfort inference using RGB video images for distributed HVAC control,” Appl. Energy, vol. 220, no. February, pp. 829–841, Jun. 2018. doi: 10.1016/j.apenergy.2018.02.049.
R. R. Pawar and S. B. Deosarkar, “Health condition monitoring system for distribution transformer using Internet of Things (IoT),” in 2017 International Conference on Computing Methodologies and Communication (ICCMC), 2017, no. Iccmc, pp. 117–122. doi: 10.1109/ICCMC.2017.8282650.
S. Abraham and X. Li, “A Cost-effective Wireless Sensor Network System for Indoor Air Quality Monitoring Applications,” Procedia Comput. Sci., vol. 34, pp. 165–171, 2014. doi: 10.1016/j.procs.2014.07.090
E. Subin, S. Renuka, K. Chaitanya, and A. Sudheer, “Implementation Of Signal Processing Filters For Portable ECG Devices Using Android Mobile Phone And Bluetooth,” in 2017 14th IEEE India Council International Conference (INDICON), 2017, pp. 1–5. doi: 10.1109/INDICON.2017.8487490.
DOI: https://doi.org/10.18196/jrc.1101
Refbacks
- There are currently no refbacks.
Copyright (c) 2019 Journal of Robotics and Control
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal of Robotics and Control (JRC)
P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com