Design and Modeling of 9 Degrees of Freedom Redundant Robotic Manipulator

Zuha Anjum, Saifullah Samo, Arbab Nighat, Akhtar Un Nisa, Muhammad Ali Soomro, Reza Alayi

Abstract


In disaster areas, robot manipulators are used to rescue and clearance of sites. Because of the damaged area, they encounter disturbances like obstacles, and limited workspace to explore the area and to achieve the location of the victims. Increasing the degrees of freedom is required to boost the adaptability of manipulators to avoid disturbances, and to obtain the fast desired position and precise movements of the end-effector. These robot manipulators offer a reliable way to handle the barrier challenges since they can search in places that humans can't reach. In this research paper, the 9-DOF robotic manipulator is designed, and an analytical model is developed to examine the system’s behavior in different scenarios. The kinematic and dynamic representation of the proposed model is analyzed to obtain the translation or rotation, and joint torques to achieve the expected position, velocity, and acceleration respectively. The number of degrees may be raised to avoid disturbances, and to obtain the fast desired position and precise movements of the end-effector. The simulation of developed models is performed to ensure the adaptable movement of the manipulators working in distinct configurations and controlling their motion thoroughly and effectively. In the proposed configuration the joints can easily be moved to achieve the desired position of the end-effector and the results are satisfactory. The simulation results show that the redundant manipulator achieves the victim location with various configurations of the manipulator. Results reveal the effectiveness and efficacy of the proposed system.

Keywords


Hyper-Redundant Robotic Manipulator; 9 DOF; Rescue Robot; Cataclysmic; Functional Modeling

Full Text:

PDF

References


X. Zhu and B. He, “Underactuated Rehabilitation Robotics for Hand Function,” Journal of Robotics and Control (JRC), vol. 2, no. 5, pp. 337–341, 2021, https://doi.org/10.18196/jrc.25103.

M. I. F. Hatta and N. S. Widodo, "Robot Operating System (ROS) in Quadcopter Flying Robot Using Telemetry System," International Journal of Robotics and Control Systems, vol. 1, no. 1, pp. 54–65, 2021, https://doi.org/10.31763/ijrcs.v1i1.247

I. Rifajar and A. Fadlil, "The Path Direction Control System for Lanange Jagad Dance Robot Using the MPU6050 Gyroscope Sensor," International Journal of Robotics and Control Systems, vol. 1, no. 1, pp. 27–40, 2021,https://doi.org/10.31763/ijrcs.v1i1.225

Martín-Barrio, Andrés, et al. “Design of a Hyper-Redundant Robot and Teleoperation Using Mixed Reality for Inspection Tasks,” Sensors, vol. 20, no. 8, p. 2181, 2020 https://doi.org/10.3390/s20082181.

B. Hao, H. Du, X. Dai, and H. Liang, “Automatic Recharging Path Planning for Cleaning Robots,” Mobile Information Systems, vol. 2021, 2021, https://doi.org/10.1155/2021/5558096

A. A. Beltran Jr, K. J. T. Dizon, K. C. Nones, R. L. M. Salanguit, J. B. D. Santos, J. R. G. Santos, "Arduino-based Disaster Management Alarm System with SMS," Journal of Robotics and Control (JRC), vol. 2, no. 1, pp. 24-28, 2022, https://doi.org/10.18196/jrc.2147.

S. Shan, F. Zhao, Y. Wei, M. Liu, “Disaster management 2.0: A real-time disaster damage assessment model based on mobile social media data—A case study of Weibo (Chinese Twitter),” Safety Science, vol. 201, 2019.

C. Mouradian, S. Yangui, RH. Glitho, “Robots as-a-service in cloud computing: Search and rescue in large-scale disasters case study,” 15th IEEE Annual Consumer Communications Networking Conference (CCNC), p. 1–7, 2018.

M. Marsono, Y. Yoto, A. Suyetno, R. Nurmalasari, "Design and Programming of 5 Axis Manipulator Robot with GrblGru Open Source Software on Preparing Vocational Students’ Robotic Skills," Journal of Robotics and Control (JRC), vol. 2, no. 1, pp. 539-545. 2021, https://doi.org/10.18196/jrc.26134.

J. R Deng, "Research on Rescue Robot Model Design," Industry and Technology Forum, vol. 17, no. 2, pp. 36-37, 2018.

A. Wolf et al., “A Mobile Hyper Redundant Mechanism for Search and Rescue Tasks,” IEEE Int. Conf. Intell. Robot. Syst., vol. 3, pp. 2889–2895, 2003.

I. Hassani, I. Ergui, and C. Rekik, "Turning Point and Free Segments Strategies for Navigation of Wheeled Mobile Robot," International Journal of Robotics and Control Systems, vol. 2, no. 1, pp.172-186. 2022, https://doi.org/10.31763/ijrcs.v2i1.586.

J. J. Duan, Y. H. Gan, X. Z. Dai et al., "Inverse solution method of redundant robot based on operability evaluation," Journal of Huazhong University of science and Technology (Natural Science Edition), vol. 57, no. z1, pp. 45-48, 2015

S. Mukai and N. Maru, "Redundant Arm Control by Linear Visual Servoing Using Pseudo Inverse Matrix," 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 1237-1242, 2006.

R. T. Sataloff, M. M. Johns, and K. M. Kost, “Hyper-Redundant Robot Mechanisms and Their Applications, ”IEEE/RSJ International Workshop on intelligent Robots and systems, 1991

E. C. Agbaraji, H. C. Inyiama, and I. Obiora-dimson, “Joint Torque and Motion Computational Analysis for Robotic Manipulator Arm Design,” Journal of Engineering and Applied Sciences, vol. 12, pp. 1–9, 2018.

P. K. Patchaikani, L. Behera and G. Prasad, "A single network adaptive critic-based redundancy resolution scheme for robot manipulators," IEEE Trans. Ind. Electron., vol. 59, pp. 3241-3253, Aug. 2012.

D. N. Nenchev, Y. Tsumaki and M. Takahashi, "Singularity-consistent kinematic redundancy resolution for the S-R-S manipulator," Proc. IEEE/RSJ Int. Conf. Intell. Robots Syst., Apr. 2004.

M. M. Schill and M. Buss, "Kinematic trajectory planning for dynamically unconstrained nonprehensile joints," IEEE Robot. Autom. Lett., vol. 3, no. 2, pp. 728-734, Apr. 2018.

A. Flores-Abad, O. Ma, K. Pham and S. Ulrich, "A review of space robotics technologies for on-orbit servicing," Prog. Aerosp. Sci., vol. 68, no. 8, pp. 1-26, Jul. 2014.

H. Kim, L. M. Miller, N. Byl, G. Abrams and J. Rosen, "Redundancy resolution of the human arm and an upper limb exoskeleton," IEEE Trans. Biomed. Eng., vol. 59, no. 6, pp. 1770-1779, Jun. 2012.

P. Berthet-Rayne, K. Leibrandt, G. Gras, P. Fraisse, A. Crosnier and G.-Z. Yang, "Inverse kinematics control methods for redundant snakelike robot teleoperation during minimally invasive surgery," IEEE Robot. Autom. Lett., vol. 3, no. 3, pp. 2501-2508, Jul. 2018.

J. Zhang, Q. Meng, X. Feng, and H. Shen, “A 6 ‑ DOF robot ‑ time optimal trajectory planning based on an improved genetic algorithm,” Robot. Biomimetics, pp. 3–9, 2018.

B. S. García, F. R.Cortés, B.M. Al-Hadithi, O. F.Beltrán, "Global SaturatedRegulatorwithVariable Gains for Robot Manipulators", International Journal of Robotics and Control, vol.02, no.06, pp.24-28. 2022. https://doi.org/10.18196/jrc.26139.

X. Zhang, B. Fan, C. Wang, and X. Cheng, “Analysis of Singular Configuration of Robotic Manipulators,” Electronics, vol. 10, no. 18, p. 2189, 2021.

A. A. Almarkhi and A. A. Maciejewski, “Singularity analysis for redundant manipulators of arbitrary kinematic structure,” ICINCO 2019 - Proc. 16th Int. Conf. Informatics Control. Autom. Robot., vol. 2, pp. 42–49, 2019, https://doi.org/10.5220/0007833100420049.

Wang H, Zhou Z, Zhong X, Chen Q. “Singular Configuration Analysis and Singularity Avoidance with Application in an Intelligent Robotic Manipulator,” Sensors, vol. 22, no. 3, p. 1239, 2022, https://doi.org/10.3390/s22031239.

S. A. Ajwad, J. Iqbal, R. U. Islam, A. Alsheikhy, A. Almeshal, and A. Mehmood, “Optimal and Robust Control of Multi DOF Robotic Manipulator: Design and Hardware Realization,” Cybern. Syst., vol. 49, no. 1, pp. 77–93, 2018.

A. R. A. Tahtawi, M. Agni and T. D. Hendrawati, “Small-scale Robot Arm Design with Pick and Place Mission Based on Inverse Kinematics,” Journal of Robotics and Control, vol. 2, pp. 469–475, 2021, https://doi.org/10.18196/jrc.26124.

Y. Chen, Y. Chen, and J. Guo, “An optimization algorithm to expand the reduced workspace with fixed-joint method for redundant manipulator,” in 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO), , pp. 116–120, July 2016

I. Zaplana and L. Basanez, “A novel closed-form solution for the inverse kinematics of redundant manipulators through workspace analysis,” Mechanism and Machine Theory, vol. 121, pp. 829–843, March 2018.

H. A. R. Akkar and A. Najim, “Forward Kinematics and Workspace Analysis of 6DOF Manipulator Arm Applied on Lab VIEW,” Saussurea, vol. 7, no. 1, pp. 1-11, 2017.

B. Sunal, E. Oztop, and O. Bebek, “Adaptive Inverse Kinematics of a 9-DOF Surgical Robot for Effective Manipulation,” 2019 4th IEEE Int. Conf. Adv. Robot. Mechatronics, ICARM 2019, pp. 678–683, 2019.

T. P. Singh, P. Suresh, and S. Chandan, “Forward and Inverse Kinematic Analysis of Robotic Manipulators,” International Research Journal of Engineering and Technology (IRJET), vol. 4, mo. 2, pp. 1459-1468, 2017.

J. Iqbal, R. Islam, and H. Khan, “Modeling and Analysis of a 6 DOF Robotic Arm Manipulator,” Canadian Journal on Electrical and Electronics Engineering, vol. 3, no. 6, pp. 300-306, 2012.

M. Hüseyinoğlu and T. Abut, “Dynamic model and control of 2-dof robotic arm,” European Journal of Technique (EJT), vol. 8, no. 2, pp. 141-150, 2018.

M. Palankar et al., “Control of a 9-DoF wheelchair-mounted robotic arm system using a P300 brain computer interface: Initial experiments,” 2008 IEEE Int. Conf. Robot. Biomimetics, ROBIO 2008, pp. 348–353, 2009.

M. A. Qassem, I. M. Abuhadrous, and H. Elaydi, “Modeling and Simulation of 5 DOF educational robot arm,” 2010 2nd International Conference on Advanced Computer Control, pp. 569-574, 2010.

A. Ahmed, M. Yu, and F. Chen, “Inverse Kinematic Solution of 6-DOF Robot-Arm Based on Dual Quaternions and Axis Invariant Methods,” Arab. J. Sci. Eng., 2022.

R. Dou et al., “Inverse kinematics for a 7-DOF humanoid robotic arm with joint limit and end pose coupling,” Mech. Mach. Theory, vol. 169, no. September 2021, p. 104637, 2022.

S. J. Abbasi, H. Khan, J. W. Lee, M. Salman, and M. C. Lee, “Robust Control Design for Accurate Trajectory Tracking of Multi-Degree-of-Freedom Robot Manipulator in Virtual Simulator,” IEEE Access, vol. 10, pp. 17155–17168, 2022.

M. A. N. Huda, S. H. Susilo, and P. M. Adhi, “Implementation of Inverse Kinematic and Trajectory Planning on 6-DOF Robotic Arm for Straight-Flat Welding Movement,” Log. J. Ranc. Bangun dan Teknol., vol. 22, no. 1, pp. 51–61, 2022.

J. Cashbaugh and C. Kitts, "Automatic calculation of a transformation matrix between two frames," IEEE Access, vol. 6, pp. 9614-9622, 2018.

C. Ji, M. Kong and R. Li, "Time-energy optimal trajectory planning for variable stiffness actuated robot," IEEE Access, vol. 7, pp. 14366-14377, 2019.

X. Lv, Z. Yu, M. Liu, G. Zhang and L. Zhang, "Direct trajectory planning method based on IEPSO and fuzzy rewards and punishment theory for multi-degree-of freedom manipulators," IEEE Access, vol. 7, pp. 20452-20461, 2019.

X. Zhang, Y. Fang and N. Sun, "Minimum-time trajectory planning for underactuated overhead crane systems with state and control constraints," IEEE Trans. Ind. Electron., vol. 61, pp. 6915-6925, Dec. 2014.

Y. Liu, M. Cong, H. Dong and D. Liu, "Reinforcement learning and EGA-based trajectory planning for dual robots," Int. J. Robot. Automat., vol. 33, no. 4, pp. 367-378, 2018.

A. Gasparetto and V. Zanotto, "A new method for smooth trajectory planning of robot manipulators," Mech. Mach. Theory, vol. 42, no. 4, pp. 455-471, 2007.

S. Kucuk, "Optimal trajectory generation algorithm for serial and parallel manipulators," Robot. Comput.-Integr. Manuf., vol. 48, pp. 219-232, Dec. 2017.

M. Q. Mohammed, M. F. Miskon, M. B. Bin, and S. A. Ali, “Comparative Study Between Quintic and Cubic Polynomial Equations Based Walking Trajectory of Exoskeleton System,” International Journal of Mechanical & Mechatronics Engineering, vol. 17, no. 4, 2017.

R. Roy, M. Mahadevappa and C. S. Kumar, "Trajectory path planning of EEG controlled robotic arm using GA," Procedia Comput. Sci., vol. 84, pp. 147-151, Dec. 2016.

L. Tian and C. Collins, "An effective robot trajectory planning method using a genetic algorithm," Mechatronics, vol. 14, no. 5, pp. 455-470, Jun. 2004.

H.-I. Lin, "A fast and unified method to find a minimum-jerk robot joint trajectory using particle swarm optimization," J. Intell. Robotic Syst., vol. 75, no. 3, pp. 379-392, 2014.

M. Wang, J. Luo and U. Walter, "Trajectory planning of free-floating space robot using particle swarm optimization (PSO)," Acta Astronautica, vol. 112, pp. 77-88, Jul./Aug. 2015.

S. Kucuk, "Energy minimization for 3-RRR fully planar parallel manipulator using particle swarm optimization," Mech. Mach. Theory, vol. 62, pp. 129-149, Apr. 2013.

Z. Qingzhen, G. Chen, G. Fei and R. Zhang, "Reentry trajectory planning optimization based on sequential quadratic programming," Proc. 2nd Int. Symp. Syst. Control Aerosp. Astronaut., vol. 1, pp. 1-5, Dec. 2008.

A. Gasparetto and V. Zanotto, "A technique for time-jerk optimal planning of robot trajectories," Robot. Comput.-Integr. Manuf., vol. 24, no. 3, pp. 415-426, 2008.




DOI: https://doi.org/10.18196/jrc.v3i6.15958

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Saifullah Samo, Zuha Zuha Anjum, Arbab Nighat, Akhtar Un Nisa, Muhammad Ali Soomro, Reza Alayi

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Journal of Robotics and Control (JRC)

P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com

Kuliah Teknik Elektro Terbaik