Fuzzy Logic Control and PID Controller for Brushless Permanent Magnetic Direct Current Motor: A Comparative Study
Abstract
Electrical machines based on permanent magnet material excitations have been applied in many sectors since they are distinguished by their high torque-to-size ratio and offer high efficiency. Brushless permanent magnetic direct current (BLPMDC) motors are one type of these machines. They are preferable over conventional DC motors. one of the main challengings of the BLPMDC motor drives is the inherited feature of nonlinearity. Therefore, a conventional PID controller would not be an efficient choice for the speed control of such motors. The object of this paper is to design an efficient speed control for the BLPMDC motor. The proposed controller is based on the Fuzzy logic technique. MATLAB/ Simulink has been employed to design and test the drive system. Simulations were carried out for three cases, the first without a controller, the other using conventional control, and the third using expert systems. The results proved the possibility of improving the engine's working performance using the control systems. They also proved that the adoption of expert systems is better than the traditional nonlinear systems. The simulation response shows that the Rise Time(tr) at PID equals 66.306ms, while it equals 19.530ms for the Fuzzy logic controller. Moreover, Overshoot for PID and Fuzzy logic controller are 6.989% and 1.531%, respectively. On the other hand, undershoot is equal to 1.788% and 11.924% for PID and Fuzzy logic controller, respectively.
Full Text:
PDFReferences
A. Ma'arif and N. R. Setiawan, "Control of DC motor using integral state feedback and comparison with PID: simulation and arduino implementation," Journal of Robotics and Control (JRC), vol. 2, no. 5, pp. 456-461, 2021.
M. Khalifa, AL H. Amhedb, and M. Al Sharqawi, "Position Control of Real Time DC Motor Using LabVIEW," Journal of Robotics and Control (JRC), vol. 2, no. 5, pp. 342-348, 2021.
A. Ma'arif and A. Çakan, "Simulation and arduino hardware implementation of dc motor control using sliding mode controller," Journal of Robotics and Control (JRC), vol. 2, no. 6, pp. 582-587, 2021.
R. T. Yunardi, D. Arifianto, F. Bachtiar, and J. I. Prananingrum, "Holonomic implementation of three wheels omnidirectional mobile robot using dc motors," Journal of Robotics and Control (JRC), vol. 2, no. 2, pp. 65-71, 2021.
Y. I. Al Mashhadany, "High-performance multilevel inverter drive of brushless DC motor," International Journal of Sustainable and Green Energy, vol. 4, no. 3-1, pp. 1-7, 2015.
S. W. Shneen, D. H. Shaker, and F. N. Abdullah, "Simulation model of PID for DC-DC converter by using MATLAB," International Journal of Electrical and Computer Engineering, vol. 11, no. 5, p. 3791, 2021.
R. M. Pindoriya, et al., "Comparative analysis of permanent magnet motors and switched reluctance motors capabilities for electric and hybrid electric vehicles," 2018 IEEMA Engineer Infinite Conference (eTechNxT). IEEE, pp. 1-5, 2018.
A. E. Aliasand, and F. T. Josh, "Selection of motor foran electric vehicle: A review," Materials Today: Proceedings, vol. 24, pp. 1804-1815, 2020.
N. Milivojevic, et al., "Stability analysis of FPGA-based control of brushless DC motors and generators using digital PWM technique," IEEE transactions on industrial electronics, vol. 59, no. 1, pp. 343-351, 2011.
S. Hans, and S. Ghosh, "Position analysis of brushless direct current motor using robust fixed order H-infinity controller," Assembly Automation, vol. 40, no. 2, pp. 211-218, 2020.
V. Madonna, et al., "The rebirth of the current source inverter: Advantages for aerospace motor design," IEEE Industrial Electronics Magazine, vol. 13, no. 4, pp. 65-76, 2019.
D. H. Shaker, S. W. Shneen, F. N. Abdullah, and G. A. Aziz, “Simulation Model of Single-Phase AC-AC Converter by Using MATLAB,” Journal of Robotics and Control (JRC), vol. 3, no. 5, pp. 656-665, 2022.
X. Ding, Y. Zhou, and J. Cheng, "A review of gallium nitride power device and its applications in motor drive," CES Transactions on Electrical Machines and Systems, vol. 3, no. 1, pp. 54-64, 2019.
M. Galea et al., "Reliability-Oriented Design of Electrical Machines: The Design Process for Machines' Insulation Systems MUST Evolve," IEEE Industrial Electronics Magazine, vol. 14, no.1, pp. 20-28, 2020.
X. F. Zheng, et al., "A review of thermoelectrics research–Recent developments and potentials for sustainable and renewable energy applications," Renewable and Sustainable Energy Reviews, vol. 32, pp. 486-503, 2014.
J. C. Najmon, S. Raeisi, and A. Tovar, "Review of additive manufacturing technologies and applications in the aerospace industry," Additive manufacturing for the aerospace industry, pp. 7-31, 2019.
H. S. Dakheel, Z. B. Abdullah, N. S. Jasim, and S. W. Shneen, "Simulation model of ANN and PID controller for direct current servo motor by using Matlab/Simulink," Telkomnika, vol. 20, no. 4, 2022.
J. Feng, K. Liu, and Q. Wang, "Scheme based on buck‐converter with three‐phase H‐bridge combinations for high‐speed BLDC motors in aerospace applications," IET Electric Power Applications, vol. 12, no. 3, pp. 405-414, 2018.
W. Chen et al., "A novel method of reducing commutation torque ripple for brushless DC motor based on Cuk converter," IEEE Transactions on Power Electronics, vol. 32, no. 7, pp. 5497-5508, 2016.
X. Zhou et al. "Fast commutation instant shift correction method for sensorless coreless BLDC motor based on terminal voltage information," IEEE Transactions on Power Electronics, vol. 32, no. 12, pp. 9460-9472, 2017.
H. A. Toliyat and T. Gopalarathnam, "AC machines controlled as DC machines (Brushless DC machines/electronics)," The power electronics handbook, CRC Press, 2018.
S. W. Shneen, F. N. Abdullah, and D. H. Shaker, "Simulation model of single phase PWM inverter by using MATLAB/Simulink," International Journal of Power Electronics and Drive Systems, vol. 12, no. 1, p. 212, 2021.
X. Xiang, J. Chai, and X. Sun, "A novel DC motor based on mechanical–electrical hybrid commutation," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 6, no. 3, pp. 1605-1615, 2017.
R. Ramachandran, D. Ganeshaperumal and B. Subathra, "Closed-loop Control of BLDC Motor in Electric Vehicle Applications," 2019 IEEE International Conference on Clean Energy and Energy Efficient Electronics Circuit for Sustainable Development (INCCES), pp. 1-5, 2019.
B. Alsayid, W. A. Salah, and Y. Alawneh, "Modelling of sensored speed control of BLDC motor using MATLAB/SIMULINK," International Journal of Electrical and Computer Engineering, vol. 9, no. 5, pp. 3333-3343, 2019.
A. A. El-Samahy and M. A. Shamseldin, “Brushless DC motor tracking control using self-tuning fuzzy PID control and model reference adaptive control,” Ain Shams Engineering Journal, vol. 9, no. 3, pp. 341-352, 2018.
S. W. Shneen, et al., "Application of LFAC {16 2/3Hz} for electrical power transmission system: a comparative simulation study," TELKOMNIKA (Telecommunication Computing Electronics and Control), vol. 17, no. 2, pp. 1055-1064, 2019.
A. Azarudeen and D. Mary, "Performance analysis of conventional and digital PWM control scheme for speed control of BLDC motor drives," 2017 International Conference on Advances in Electrical Technology for Green Energy (ICAETGT), pp. 69-75, 2017.
K. S. Devi, R. Dhanasekaran and S. Muthulakshmi, "Improvement of speed control performance in BLDC motor using fuzzy PID controller," 2016 International Conference on Advanced Communication Control and Computing Technologies (ICACCCT), pp. 380-384, 2016.
M. A. Shamseldin and A. A. EL-Samahy, "Speed control of BLDC motor by using PID control and self-tuning fuzzy PID controller," 15th International Workshop on Research and Education in Mechatronics (REM), pp. 1-9, 2014.
A. J. Varghese, R. Roy and S. Thirunavukkarasu, "Optimized Speed Control for BLDC Motor," International Journal of Innovative Research in Science Engineering and Technology, vol. 3, pp. 1019 -1030, 2014.
H. H. Lwin and N. M. Seng, "Performance Comparison of P and PI Controller for Speed Control of Three Phase Brushless DC Motor," International Journal of Trend in Research and Development, vol. 5, no. 5, pp. 358-360, 2018.
S. W. Shneen, H. S. Dakheel, and Z. B. Abdulla, "Design and implementation of variable and constant load for induction motor," International Journal of Power Electronics and Drive Systems, vol. 11, no. 2, p. 762, 2020.
N. Leena and R. Shanmugasundaram, "Artificial neural network controller for improved performance of brushless DC motor," 2014 International Conference on Power Signals Control and Computations (EPSCICON), pp. 1-6, 2014.
S. Usha, P. M. Dubey, R. Ramya, and M.V. Suganyadevi, "Performance enhancement of BLDC motor using PID controller," International Journal of Power Electronics and Drive Systems (IJPEDS), vol. 12, no. 3, pp. 1335-1344, 2021.
S. Mitra, R. S. Nayak, and R. Prakash," Modeling and Simulation of BLDC Motor using MATLAB/SIMULINK Environment," International Research Journal of Engineering and Technology (IRJET), vol. 2, no. 8, pp. 199-203, 2015.
S. W. Shneen, C. Mao, and N. K. Bachache. "Biogeography based optimization for tuning FLC controller of PMSM," International Conference in Swarm Intelligence. Springer, Cham, pp. 395-402, 2015.
B. N. Kommula and V. R. Kota, "Direct instantaneous torque control of Brushless DC motor using firefly Algorithm based fractional order PID controller," Journal of King Saud University-Engineering Sciences, vol. 32, no. 2, pp. 133-140, 2020.
J. Karthikeyan and R. Dhanasekaran, "Resonant DC Link Inverter for Brushless DC Motor Drive System," International Journal of Emerging Electric Power Systems, vol. 13, no. 2, pp. 1-15, 2012.
M. Kaur, A. Nehra, A. Tomar, and N. Charaya, "Speed Control of DC Motor using Artificial Intelligence," International Journal for Research in Applied Science and Engineering Technology, vol. 7, no. 6, pp. 913-917, 2019.
W. Elsrogy, M. A. Fkirin, and M. M. Hassan, "Speed control of DC motor using PID controller based on artificial intelligence techniques," 2013 International Conference on Control, Decision and Information Technologies, pp. 196-201, 2013.
M. Alhanjouri, "Speed Control of DC Motor using Artificial Neural Network," International Journal of Science and Research (IJSR), vol. 6, no. 2, pp. 2140 - 2148, 2017.
S. A. Hamoodi, I. I. Sheet and R. A. Mohammed, "A Comparison between PID controller and ANN controller for speed control of DC Motor," 2019 2nd International Conference on Electrical, Communication, Computer, Power and Control Engineering (ICECCPCE), pp. 221-224, 2019.
S. W. Shneen, and G. A. Aziz, "Simulation model of 3-phase PWM rectifier by using MATLAB/Simulink," International Journal of Electrical and Computer Engineering, vol. 11, no. 5, p. 3736, 2021.
R. Arulmozhiyal, "Design and Implementation of Fuzzy PID controller for BLDC motor using FPGA," 2012 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), pp. 1-6, 2012.
N. Farouk and T. Bingqi, "Application of self-tuning fuzzy PID controller on the AVR system," 2012 IEEE International Conference on Mechatronics and Automation, pp. 2510-2514, 2012.
I. Anshory, I. Robandi, and Wirawan, "Parameters identification BLDC motor: Instrumentations and transfer functions," MATEC Web of Conferences, EDP Sciences, vol. 197, 2018.
F. N. Abdullah, G. A. Aziz, and S. W. Shneen, "Simulation Model of Servo Motor by Using Matlab," Journal of Robotics and Control (JRC), vol. 3, no. 2, 176-179, 2022.
D. Maneetham and P. Sutyasadi, "Controlling a knee CPM machine using PID and iterative learning control algorithm," TELKOMNIKA (Telecommunication Computing Electronics and Control), vol. 18, no. 2, pp. 1047-1053, 2022.
A. Tikkani and P. V. N. Prasad, "Type-1 and type-2 fuzzy logic-based space vector modulation for two-level inverter fed induction motor," Telkomnika, vol. 20, no. 4, 2022.
DOI: https://doi.org/10.18196/jrc.v3i6.15974
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 salam Waley shneen, Ahlam Luaibi Shuraiji
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal of Robotics and Control (JRC)
P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com