The Influence of Ruggedness Reviews 3-Dimensional Photo Carving Media Based on 3-Axis CNC Router

Noor Yulita Dwi Setyaningsih, Khan Annudin, Solekhan Solekhan

Abstract


Today's face relief is very popular with people, both for gifts at special events or for mementos. Not everyone is able and able to produce or create relief carving 3-dimensional photos properly, so research on 3D photo carving using a CNC machine was made. CNC machine is a tool used to engrave and produce 3-dimensional photo engraving automatically. This research uses the Aspire application to create a G-Code type image. Next, connect the Arduino which in this case is used as the control device to enter the G-code obtained using the GRBL Control application. The gap in media reviews affects the time it takes in the manufacturing process, wherewith the same image design it is found that the greater the stretch of the reviews, the faster the time needed but the carving results are lined and rough. Likewise, the opposite condition, the smaller the gap in the review, the longer it takes, and the results obtained are smoother. So that in the future it can make a combination of choices from the stretch of reviews for engraved images.

Keywords


estrangement reviews; engraving; 3-dimensional photos; CNC routers; wood media

Full Text:

PDF

References


D. Aslan and Y. Altintas, “Prediction of Cutting Forces in Five-Axis Milling Using Feed Drive Current Measurements,” IEEE/ASME Trans. Mechatronics, vol. 23, no. 2, pp. 833–844, Apr. 2018.

I. Takeuchi and S. Katsura, “Interpolation of a Clothoid Curve Based on Iterative True-Value Prediction Considering the Discretization Error,” IEEE Trans. Ind. Informatics, vol. 14, no. 11, pp. 5156–5166, Nov. 2018.

K. Zhou, J. Ding, C. Zhou, and W. Wu, “$W$ -Band Dual-Band Quasi-Elliptical Waveguide Filter With Flexibly Allocated Frequency and Bandwidth Ratios,” IEEE Microw. Wirel. Components Lett., vol. 28, no. 3, pp. 206–208, Mar. 2018.

K. Verma and R. M. Belokar, “Experimental investigations of ball screws over static and accelerating torque-based lead factor in CNC machining centre,” J. Eng., vol. 2018, no. 1, pp. 17–21, Jan. 2018.

T.-C. Lu, S.-L. Chen, and E. C.-Y. Yang, “Near Time-Optimal S-Curve Velocity Planning for Multiple Line Segments Under Axis Constraints,” IEEE Trans. Ind. Electron., vol. 65, no. 12, pp. 9582–9592, Dec. 2018.

R. Shi, Y. Lou, X. Zhang, and J. Li, “A Novel Task Coordinate Frame Reduced- Dimension 3-D Contouring Control,” IEEE Trans. Autom. Sci. Eng., vol. 15, no. 4, pp. 1852–1863, Oct. 2018.

J. Feng et al., “Fabrication of a 0.346-THz BWO for Plasma Diagnostics,” IEEE Trans. Electron Devices, vol. 65, no. 6, pp. 2156–2163, Jun. 2018.

M. Hanifzadegan and R. Nagamune, “Contouring Control of CNC Machine Tools Based on Linear Parameter-Varying Controllers,” IEEE/ASME Trans. Mechatronics, vol. 21, no. 5, pp. 2522–2530, Oct. 2016.

J. Ding, D. Liu, S. Shi, and W. Wu, “W-band quasi-elliptical waveguide filter with cross-coupling and source–load coupling,” Electron. Lett., vol. 52, no. 23, pp. 1960–1961, Nov. 2016.

W. Zhang, Y. Zou, T. Lin, F. S. Chau, and G. Zhou, “Development of Miniature Camera Module Integrated With Solid Tunable Lens Driven by MEMS-Thermal Actuator,” J. Microelectromechanical Syst., vol. 26, no. 1, pp. 84–94, Feb. 2017.

X. Shang, H. Yang, D. Glynn, and M. J. Lancaster, “Submillimeter-wave waveguide filters fabricated by SU-8 process and laser micromachining,” IET Microwaves, Antennas Propag., vol. 11, no. 14, pp. 2027–2034, Nov. 2017.

M. A. Al-Tarifi and D. S. Filipovic, “On the design and fabrication of W-band stabilised-pattern dual-polarised horn antennas with DMLS and CNC,” IET Microwaves, Antennas Propag., vol. 11, no. 14, pp. 1930–1935, Nov. 2017.

H. Yang et al., “WR-3 Waveguide Bandpass Filters Fabricated Using High Precision CNC Machining and SU-8 Photoresist Technology,” IEEE Trans. Terahertz Sci. Technol., vol. 8, no. 1, pp. 100–107, Jan. 2018.

C. R. Donaldson, L. Zhang, M. Beardsley, M. Harris, P. G. Huggard, and W. He, “CNC Machined Helically Corrugated Interaction Region for a THz Gyrotron Traveling Wave Amplifier,” IEEE Trans. Terahertz Sci. Technol., vol. 8, no. 1, pp. 85–89, Jan. 2018.

A. Baig et al., “Performance of a Nano-CNC Machined 220-GHz Traveling Wave Tube Amplifier,” IEEE Trans. Electron Devices, vol. 64, no. 5, pp. 2390–2397, May 2017.

C.-S. Chen and Y. T. A. Sun, “Intelligent Computer-aided Process Planning of Multi-axis CNC Tapping Machine,” IEEE Access, vol. 5, no. Ic, pp. 2913–2920, 2017.

X. Shang, M. Lancaster, and Y.-L. Dong, “W-band waveguide filter based on large TM120 resonators to ease CNC milling,” Electron. Lett., vol. 53, no. 7, pp. 488–490, Mar. 2017.

K. Zhu and Y. Zhang, “A Cyber-Physical Production System Framework of Smart CNC Machining Monitoring System,” IEEE/ASME Trans. Mechatronics, vol. 23, no. 6, pp. 2579–2586, Dec. 2018.

M. Ferrando-Rocher, J. I. Herranz-Herruzo, A. Valero-Nogueira, and B. Bernardo-Clemente, “Performance Assessment of Gap-Waveguide Array Antennas: CNC Milling Versus Three-Dimensional Printing,” IEEE Antennas Wirel. Propag. Lett., vol. 17, no. 11, pp. 2056–2060, Nov. 2018.

I. Iglesias, J. E. Ares, C. Gonzalez-Gaya, F. Morales, and V. F. Rosales, “Predictive Methodology for Dimensional Path Precision in Robotic Machining Operations,” IEEE Access, vol. 6, pp. 49217–49223, 2018.

X. Tian, L. Jiao, Z. Gan, C. Wang, and X. Zheng, “Consistency-Constrained Nonnegative Coding for Tracking,” IEEE Trans. Circuits Syst. Video Technol., vol. 27, no. 4, pp. 880–891, Apr. 2017.

A. D. Vieira, E. A. P. Santos, M. H. de Queiroz, A. B. Leal, A. D. de Paula Neto, and J. E. R. Cury, “A Method for PLC Implementation of Supervisory Control of Discrete Event Systems,” IEEE Trans. Control Syst. Technol., vol. 25, no. 1, pp. 175–191, Jan. 2017.

N. de Oliveria Pacheco and J. de Oliveira Pacheco, “Implementation Supervisory Control Ladder Language for a Manufacturing Cell,” IEEE Lat. Am. Trans., vol. 15, no. 2, pp. 219–224, Feb. 2017.

Y. Chen and L. Li, “Smooth Geodesic Interpolation for Five-Axis Machine Tools,” IEEE/ASME Trans. Mechatronics, vol. 21, no. 3, pp. 1592–1603, Jun. 2016.

B. Zhu, S. Wang, and Y. Liu, “A Convolutional Network Coding Oriented Four-Stage Contention Protocol for All-to-All Broadcasting Networks,” Chinese J. Electron., vol. 25, no. 1, pp. 192–198, Jan. 2016.

M. Corapsiz and K. Erenturk, “Trajectory Tracking Control and Contouring Performance of Three Dimensional CNC,” IEEE Trans. Ind. Electron., vol. 63, no. 4, pp. 1–1, 2016.

W. Choi, I. Lee, and E. Choi, “Design and Fabrication of a 300 GHz Modified Sine Waveguide Traveling-Wave Tube Using a Nanocomputer Numerical Control Machine,” IEEE Trans. Electron Devices, vol. 64, no. 7, pp. 2955–2962, 2017.

G. Chattopadhyay, T. Reck, C. Lee, and C. Jung-Kubiak, “Micromachined Packaging for Terahertz Systems,” Proc. IEEE, vol. 105, no. 6, pp. 1139–1150, Jun. 2017.

N. de Oliveira Pacheco, “Use neutral data interfaces for Numerical Controllers Computerized,” IEEE Lat. Am. Trans., vol. 15, no. 6, pp. 1212–1218, Jun. 2017.

Z. Zhou, J. Hu, Q. Liu, P. Lou, J. Yan, and W. Li, “Fog computing-based cyber-physical machine tool system,” IEEE Access, vol. 6, pp. 44580–44590, 2018.

E. Natarajan, V. Kaviarasan, W. H. Lim, S. S. Tiang, and T. H. Tan, “Enhanced Multi-Objective Teaching-Learning-Based Optimization for Machining of Delrin,” IEEE Access, vol. 6, pp. 51528–51546, 2018.

I. Afifi, M. M. M. Ali, and M. Ali, “Analysis and Design of a Wideband Coaxial Transition to Metal and Printed Ridge Gap Waveguide,” IEEE Access, vol. 6, pp. 70698–70706, 2018.




DOI: https://doi.org/10.18196/jrc.2381

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Journal of Robotics and Control (JRC)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Journal of Robotics and Control (JRC)

P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com

Kuliah Teknik Elektro Terbaik